ページ1に含まれる内容の要旨
L201p Flat Panel Monitor
User’s Guide
ページ2に含まれる内容の要旨
Product numbers 9220-HB1 Fourth Edition (Oct 2006) © Copyright Lenovo 2006. All rights reserved. U.S. GOVERNMENT USERS - RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is unable to accept this Program under these terms, then we provide this Program under th
ページ3に含まれる内容の要旨
Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Chapter1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Shipping contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 Product
ページ4に含まれる内容の要旨
Safety information Before installing this product, read the Safety Information. íí í v ThinkVision L201p Flat Panel Monitor User’s Guide
ページ5に含まれる内容の要旨
Chapter 1. Getting started ® This User’s Guide contains detailed information on the ThinkVision L201p Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: • ThinkVision L201p Flat Panel Monitor Setup Poster • Monitor Safety, Troubleshooting, and Warranty Guide • Reference and Driver CD • ThinkVision L201p Flat Panel Monitor •Power Cord • Analog Interface Cable - Attac
ページ6に含まれる内容の要旨
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Please see the illustration below for an example of the tilt range. Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. Height Adjustment After pressing the top of the monitor, remove the fixed pin and adjust the height of the monitor. 1-2 ThinkVision L201p Flat Panel Monitor User’s
ページ7に含まれる内容の要旨
Monitor Pivot 1. In locked/down Position - Tilt upwards, so that lower edge of monitor clears the stand. - Rotate clockwise until the monitor stops at 90 °. 2. Extended Position - Rotate clockwise until the monitor stops at 90 °. User controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image” on page 2-3. Chapter 1. 1-3
ページ8に含まれる内容の要旨
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower right corner). Please see the instructions that come with the cable lock to learn how to attach it. Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Monitor Safety, Troubleshooting, and Warranty Guide before carrying out this procedure. 1. P
ページ9に含まれる内容の要旨
Plug the monitor power cord and the computer cord into grounded electrical outlets. Power on the monitor and the computer. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. Chapter 1. 1-5
ページ10に含まれる内容の要旨
To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required for normal operation. Note: If automatic image setup does not establish the image that you prefer, perform manual image setup. See “Manual image setup” on page 3-4 . Registering your option Thank you for purchasing this Lenovo™ product. Please take a few moments to register your Product and provide us with informat
ページ11に含まれる内容の要旨
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed info
ページ12に含まれる内容の要旨
Quick tips for healthy work habits The following information is a summary of some important factors to consider to help you remain comfortable and productive while you use your computer. • Good posture starts with equipment setup: The layout of your work area and the setup of your computer equipment have a large effect on your posture while using your computer. Be sure to optimize the position and orientation of your equipment by following the tips outlined in “Arranging your work area” o
ページ13に含まれる内容の要旨
Table 2-1. Direct access controls Icon Control Description Image Setup Activates automatic image adjustment. Brightness Direct access to Brightness adjustment. Input Change Switches the video input source. Adjusting your monitor image This section describes the user control features for adjusting your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Note: The direct access controls are blue. Icon
ページ14に含まれる内容の要旨
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Adjustments Adjustments Menu Submenu Description (Analog) (Digital) Adjusts overall brightness Same as Analog Brightness Brightness/ Contrast Adjusts difference between light Controls Locked - and dark areas not required for Contrast digital input Moves the image left or right. Horizontal Position Image Position Moves the image up or down. Vertical Position Automatically optimizes the image. Automatic Image Setu
ページ15に含まれる内容の要旨
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Adjustments Adjustments Menu Submenu Description (Analog) (Digital) This monitor can accept video signals through three Same as Analog different connectors. Most desktop computers use a D- Input video signal SUB connector. Select digital among OSD Controls when you use DVI connector. - Selects D-SUB (Analog) - Selects DVI (Analog) - Selects DVI (Digital) Shows resolution, refresh rate, and product details. Same as Analog Not
ページ16に含まれる内容の要旨
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicke
ページ17に含まれる内容の要旨
Unders tanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-4. Power indicator Restoring State Power Indicator Screen Operation Compliance On Steady green Normal St
ページ18に含まれる内容の要旨
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. • Use any cleaner which contains an anti-static solution or similar additives.
ページ19に含まれる内容の要旨
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 9220-xxx Dimensions Height 410.5 mm (16.2 in.) 520.5 mm (20.5 in.) Depth 248.0 mm (9.8 in.) Width 443.0 mm (17.4 in.) Stand Tilt Range: -0 °, +30 ° Swivel Range: -45 °, +45 ° Lift Range: 110.0mm Pivot Yes (clockwise 90 degree) VESA mou
ページ20に含まれる内容の要旨
Table 3-1. Monitor specifications for type-model 9220-xxx Video input (Digital) Interface DVI Input Signal VESA TMDS (Panel Link™) Horizontal addressability 1600 pixels (max) Vertical addressability 1200 lines (max) Clock frequency 162 MHz Communications VESA DDC CI Supported Display Modes Horizontal frequency 30 kHz - 81 kHz(Pixel clock <165MHz) (VESA Standard modes between Vertical frequency 56 Hz - 86 Hz(Pixel clock <165MHz) noted ranges) Native Resolution 1600 x 1200 at 60 Hz Temperature
