screen You can set the following set-up menu items. ADJ. BAR POSI. : LOWER • ADJ. BAR POSI. • COMPO. LEVEL* COLOR TEMP. :6500 1 • PICTURE SUB ADJ. • WHITE
ページ10に含まれる内容の要旨
TM-H1950CG 1-10 No.51961 HOW TO USE THE MENU HOW TO INITIALIZE THE FUNCTIONS (cont’d) SETTING Set-up menu items Purpose Settings SCREEN DISPLAY AND SELECTIONS IN THE PICTURE SUB ADJ. Image sub adjustment Selects CONTRAST/BRIGHT/CHROMA/PHASE. The selected setting screen is shown. Select the function display for RESET MODE adjustment. –10 –9 • • –01 00 +01 • • +09 +10 CONTRAST Adjusts contrast. You can set
ページ11に含まれる内容の要旨
TM-H1950CG 1-11 No.51961 BASIC CONNECTION EXAMPLE VIDEO B (Y/C) Connection Example (Select Input B (Y/C)) Notes: • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. • Each pair of input (IN) and output (OUT) terminals are bridge-connected. VIDEO A • If
ページ12に含まれる内容の要旨
TM-H1950CG SPECIFICATIONS MODEL TM-H1950CG TM-H1750CG Type Color video monitor Color system PAL, NTSC (3.58) Picture tube 49 cm (19") measured diagonally, 44 cm (17") measured diagonally, 90° deflection, in-line gun, 90° deflection, in-line gun, trio-dot type trio-dot type (phosphor dot-trio pitch 0.27 mm) (phosphor dot-trio pitch 0.27 mm) Effective screen size Width 365.8 mm (14-5/8") Width 327.5 mm (12-7/8") Height 274.3 mm (10-7/8") Height 246.2 mm (9-5/8") Diagonal 457.2 mm (18") Diagonal 40
ページ13に含まれる内容の要旨
TM-H1950CG Dimensions [TM-H1950CG] Unit : mm (inch) < Front View > < Side View > 496 (19-5/8") 485 (19-1/9") 440 (17-3/8") 1.5 (1/16") 375 (14-7/8")* CHROMA CONTRAST VOLUME/SELECT MENU UNDER COLOR BLUE POWER SCAN OFF CHECK ASPECT AB CD SLOT BRIGHT TM-H1950CG PHASE INPUT SELECT 380.4 (15") 95.7 336 (13-1/4") (3-7/8") ø20 (7/8") * Asterisks ( ) are used to indicate front panel * dimensions. [TM-H1750CG] Unit : mm (inch) < Front View > < Side View > 418 (16-1/2") 407 (16-1/8") 395 (15-5/8") 1
ページ14に含まれる内容の要旨
TM-H1950CG 1-14 No.51961 HOW TO USE EXTERNAL TROUBLESHOOTING CONTROL Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) ABOUT EXTERNAL CONTROL No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug. This monitor is provided with an external con
ページ15に含まれる内容の要旨
TM-H1950CG 1-15 No.51961 MEMO MEMO Y/C (Mini DIN 4 pin) terminal specification 2 4 Pin No. Signal IN 1 GND (Y) 1 3 Y/C 2 GND (C) 4 2 OUT 3Y 1 3 4C APPENDIX: CONNECTION EXAMPLES FOR THE SDI INPUT CARD ● To use the SWITCHED OUT terminal, the main power must be ON. (Unlike a bridged output, this connector outputs relocked digital signals.) ● Signal output from the SWITCHED OUT terminal can be changed by selecting INPUT C (SDI 1) or INPUT D (SDI 2). You can use the front panel bu
ページ16に含まれる内容の要旨
TM-H1950CG/TM-H1750CG COLOR VIDEO MONITOR VICTOR COMPANY OF JAPAN, LIMITED Printed in Thailand 0402-Y-U-JMT 2002 VICTOR COMPANY OF JAPAN, LIMITED © VP0206 DP3051