ページ1に含まれる内容の要旨
Instruction Manual
ページ2に含まれる内容の要旨
Important Information Precautions Warnings and Safety Precaution Please read this manual carefully before using your Integra The Integra plasma monitor is designed and plasma monitor and keep the manual handy for future manufactured to provide long, trouble-free service. reference. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel CAUTION surface. The plasma display panel consists of fi
ページ3に含まれる内容の要旨
Recommendations to avoid or minimize phosphor burn-in: NOTE: When you connect a computer to this monitor, attach Like all phosphor-based display devices and all other gas the supplied ferrite cores. If you do not do this, this plasma displays, plasma monitors can be susceptible to monitor will not conform to mandatory FCC standards. phosphor burn under certain circumstances. Certain Attaching the ferrite cores: operating conditions, such as the continuous display of a Set the ferrite cores on bo
ページ4に含まれる内容の要旨
Précautions Mises en garde et précautions de Veuillez lire ce manuel avec attention avant d’utiliser votre sécurité moniteur Plasma Monitor Integra et conserver ce manuel à Le moniteur Plasma Monitor Integra a été conçu et portée de la main pour une consultation ultérieure. fabriqué pour une utilisation fiable et durable. Il ne nécessite aucun entretien en dehors du nettoyage. Utiliser un chiffon doux et sec pour nettoyer la surface ATTENTION de l’écran. Ne jamais utiliser de solvant comm
ページ5に含まれる内容の要旨
Pour éviter le risque de combustion au phosphore, les REMARQUE: mesures suivantes sont recommandées : Lorsque vous branchez un micro-ordinateur sur ce moniteur, fixez les noyaux en ferrites fournis. Si vous Comme tous les appareils d’affichage à base de phosphore ne le faîtes, le moniteur ne sera pas en conformité avec et tous les autres affichages à gaz plasma, les moniteurs les exigences des standards FCC. Plasmasync peuvent être sujets à la combustion au Fixation des noyaux en ferrite. phosph
ページ6に含まれる内容の要旨
Contents How to Mount to the Plasma Monitor ................ 1 OSM Controls ................................................. 17 Menu Operations ................................................... 17 Introduction ..................................................... 2 Picture Settings Menu............................................. 19 Introduction to the Plasma Monitor PLA-50V1 .............. 2 Adjusting the picture ................................................. 19 The features you’ll enjoy
ページ7に含まれる内容の要旨
How to Mount the Plasma Monitor • This device cannot be installed on its own. Be sure to use a stand or mounting unit designed for Plasma Monitor PLA-50V1. (Wall mount unit, Stand, etc.) • For correct installation and mounting it is strongly recommended to use a trained, authorized Integra dealer. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the installer. Product warranty does not cover damage caused by improper installation. Ventilation Req
ページ8に含まれる内容の要旨
Introduction Introduction to the Plasma Monitor Contents of the Package PLA-50V1 Plasma Monitor PLA-50V1 Integra’s Plasma Monitor is a seamless blend of cutting- Power cord edge visual technology and sophisticated design. At 50- inches, with a 16:9 aspect ratio, the Plasma Monitor PLA- RGB cable (Mini D-Sub 15-pin to Mini D-Sub 15- 50V1 certainly makes a big impression. However, at a mere pin connector) 4.2 inches/107 mm thin, the monitor’s sleek techno-art Adapter for Macintosh lines bl
ページ9に含まれる内容の要旨
Part Names and Function Front View POWER/STANDBY INPUT SELECT VOLUME POWER/STANDBY VOLUME INPUT SELECT PROCEED DOWN UP LEFT/– RIGHT/+ /EXIT qy w e r tu qPROCEED t POWER/STANDBY indicator Sets the On-Screen Menu (OSM) mode and displays When the power is on ............................. Lights green. the main menu. When the power is in the standby mode ... Lights red. w VOLUME DOWN and UP y Power Adjusts the volume. Functions as the CURSOR (/ Turns the monitor’s power on and off. ) buttons in th
ページ10に含まれる内容の要旨
Rear View/ Terminal Board VIDEO 1 VIDEO 2 B VIDEO 3 VIDEO 1 L(MONO) VIDEO 2 VIDEO 3 R L(MONO) R Y Y CB/PB CR/PR L(MONO) R CB/PB C RGB 1 CR/PR R/CR/PR G/Y L(MONO) B/CB/PB HD R VD L(MONO) R RGB 3 (Digital RGB) RGB 1 SPEAKERS MUST D HAVE MORE THAN 7WATT RATING CONTROL IMPEDANCE 6 OHM LOCK ON /OFF RIGHT LEFT REMOTE CONTROL R/CR/PR EXTERNAL CONTROL G/Y AC IN B/CB/PB E HD VD K SPEAKERS MUST L(MONO) HAVE MORE THAN J R 7WATT RATING IMPEDANCE 6 OHM RIGHT LEFT F RGB 3 (Digital RGB) CONTROL LOCK
ページ11に含まれる内容の要旨
Remote Control Unit w RGB/PC Press this button to select RGB/PC as the source. → RGB/PC1 → RGB/PC2 → RGB/PC3 RGB/PC can also be selected using the INPUT SELECT button on the monitor. The input switches as follows each time the button is pressed: → VIDEO1 → VIDEO2→ VIDEO3→ DVD/HD RGB/PC3 ← RGB/PC2 ← RGB/PC1 ← e DVD / HD Press this button to select DVD/HD as the source. DVD/HD can also be selected using the INPUT SELECT button on the monitor. The input switches as follows each time the button
ページ12に含まれる内容の要旨
!3 DISPLAY Battery Installation and Replacement Displays the source settings on the screen. Insert the 2 “AAA” batteries, making sure to set them in with the proper polarity. !4 OFF TIMER Activates the off timer for the unit. 1.Press and open the cover. !5 MULTI Press this button to select a screen mode from among single mode, side by side, and picture in picture. !6 SELECT Press this button to select the active picture in a multi screen mode. !7 AUTO ADJUST Press this button to adjust Fine Pict
ページ13に含まれる内容の要旨
Using the wired remote control mode Operating Range Connect the supplied remote cable to the remote control * Use the remote control unit within a distance of about 7 m/ unit’s remote jack and the “REMOTE CONTROL” 23ft. from the front of the monitor’s remote control sensor terminal on the monitor. and at a horizontal angle of within 30°. When the cable is connected, the mode automatically * The remote control operation may not function if the switches to wired remote control. When the wired remo
ページ14に含まれる内容の要旨
Installation VCR or Laser Disc Player To video inputs on VIDEO 1 the plasma monitor VIDEO 2 VIDEO 3 Document Camera L(MONO) R Y CB/PB CR/PR L(MONO) IBM VGA or Compatibles R RGB 1 R/CR/PR Macintosh or Compatibles G/Y (Desk top type) B/CB/PB HD VD L(MONO) R Monitor adapter for Macintosh (supplied) Signal cable (supplied) RGB 3 (Digital RGB) To Mini D-Sub 15 pin connector on the plasma monitor CONTROL LOCK ON /OFF REMOTE CONTROL EXTERNAL CONTROL DVD Player Personal computer with a digit
ページ15に含まれる内容の要旨
Connecting Your PC or Macintosh Computer Connecting Your Document Camera Connecting your PC or Macintosh computer to your plasma You can connect your plasma monitor to a document monitor will enable you to display your computer’s screen camera. To do so, simply: image for an impressive presentation. The plasma monitor 1. Turn off the power to your plasma monitor and supports the signals described on page 47. document camera. To connect a PC, Macintosh or compatible graphics adapter, 2. Use a sta
ページ16に含まれる内容の要旨
External Speaker Connections VIDEO 1 VIDEO 2 VIDEO 3 L(MONO) R Y CB/PB CR/PR L(MONO) R RGB 1 R/CR/PR RIGHT LEFT G/Y B/CB/PB HD VD L(MONO) R RGB 3 (Digital RGB) SPEAKERS MUST HAVE MORE THAN CONTROL 7WATT RATING LOCK IMPEDANCE 5 OHM ON /OFF RIGHT LEFT REMOTE CONTROL EXTERNAL CONTROL AC IN External speakers may be connected to the plasma monitor To connect external speakers directly to the plasma to reproduce sound from VIDEO, DVD or RGB signal monitor: sources. 1. Strip the ends of the spea
ページ17に含まれる内容の要旨
Pin Assignments and Signal Levels for 15 pin RGB (Analog) Pin No. Signal (Analog) 5 4 3 2 1 1 Red 10 9 8 7 6 2 Green or sync-on-green 15 14 13 12 11 3 Blue 4 No connection 5 Ground 6 Red ground 7 Green ground 8 Blue ground 9 No connection 10 Sync signal ground 11 No connection 12 Bi-directional DATA (SDA) 13 Horizontal sync or Composite sync 14 Vertical sync 15 Data clock Pin Configuration and Signal of the RGB 3 IN Connector (DVI Connector) The unit is equipped with a type of connector commonly
ページ18に含まれる内容の要旨
Basic Operations POWER DIGITAL ZOOM To turn the unit ON and OFF: Digital zoom specifies the picture position and enlarges the picture. 1. Plug the power cord into an active AC power outlet. 1. Press the POINTER button to display the pointer. ( ) 2. Press the POWER ON button (on the remote control unit) to turn on the unit. To change the size of the picture: Press the ZOOM+ button and enlarge the picture. The monitor’s POWER/STANDBY indicator will light The pointer will change to resemble a magn
ページ19に含まれる内容の要旨
To cancel the off timer: OFF TIMER To set the off timer: 1. Press the OFF TIMER button twice in a row. The off timer can be set to turn the power off after 30, 60, 2. The off timer is canceled. 90 or 120 minutes. 1. Press the OFF TIMER button to start the timer at 30 OFF TIMER0 minutes. 2. Press the OFF TIMER button to the desired time. 3. The timer starts when the menu turns off. → 30 → 60 → 90 → 120 → 0 OFF TIMER30 Note: After the power is turned off with the off timer ... A slight current i
ページ20に含まれる内容の要旨
WIDE Operations STADIUM size screen Watching with a wide screen (manual) With this function, you can select one of four screen sizes. When watching videos or digital video discs 1. Press the WIDE button on the remote control unit. 2. Within 3 seconds ... Press the WIDE button again. The picture is expanded in the horizontal and vertical directions at different ratios. The screen size switches as follows: * Use this for watching normal video programs (4:3) with a → ZOOM → NORMAL → FULL → STADIUM
