ページ1に含まれる内容の要旨
USER MANUAL
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your
future reference.
ページ2に含まれる内容の要旨
ENGLISH
ページ3に含まれる内容の要旨
Congratulations! This product is TCO Certified for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory. This product has been verified to meet all the criteria in TCO Certified, including:
ページ4に含まれる内容の要旨
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characte
ページ5に含まれる内容の要旨
TABLE OF CONTENTS FOR YOUR SAFETY ..........................................................................1 SAFETY PRECAUTIONS ..............................................................1 SPECIAL NOTES ON LCD MONITORS .......................................3 CUSTOMER SERVICE .................................................................3 CLEANING ....................................................................................3 BEFORE YOU OPERATE THE MONITOR ..........................
ページ6に含まれる内容の要旨
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fi re or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fi re or electric shock. DO NOT PUT ANY OBJECT INTO THE
ページ7に含まれる内容の要旨
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children m
ページ8に含まれる内容の要旨
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you fi rst turn on the LCD monitor, the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may fl icker during initial use. Turn off the Power Switch and then turn it on again to make sure the fl icker disappears. You may
ページ9に含まれる内容の要旨
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1280 × 1024 2 High Contrast 1000:1 (Typical) , ACR Function Available / Brightness 250cd/m (Typical) / Quick Response Time 5ms (Typical) Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 1W Stereo Speakers Plug & Play VESA DDC2B Compliant ® Windows XP/Vista/7/8 Compliant ® Power Management (ENERGY STAR VESA DPMS Compliant) Ergonomic Design: TCO Certifi ed Compliant VESA Mounting Standard (10
ページ10に含まれる内容の要旨
FITTING AND REMOVAL OF BASE : ProLite B1706S The monitor is supplied complete with a stand-base. If you prefer to wall mount the monitor, please follow the instructions below to remove the stand-base. Be sure to include the stand with the monitor if it is necessary to return the unit. CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor befor
ページ11に含まれる内容の要旨
FITTING AND REMOVAL OF BASE : ProLite E1706S CAUTION Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. A Lay the monitor fl at on a table with front face down. Hold the monitor and
ページ12に含まれる内容の要旨
CONTROLS AND CONNECTORS : ProLite B1706S Power Switch ( ) A Menu / Select Button (MENU) B + / Volume Button ( + ) C - / ECO Button ( - ) D Auto Button (AUTO) E Power Indicator F NOTE Blue: Normal operation Orange: Power Management Speakers G H D-SUB mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI-D) I Cable Holder J Audio Connector (AUDIO IN) K AC Connector (AC IN) L Keyhole for Security Lock M NOTE You can fasten a security lock and cabl
ページ13に含まれる内容の要旨
CONTROLS AND CONNECTORS : ProLite E1706S Power Switch ( ) A Menu / Select Button (MENU) B + / Volume Button ( + ) C - / ECO Button ( - ) D Auto Button (AUTO) E Power Indicator F NOTE Blue: Normal operation Orange: Power Management Speakers G D-SUB mini 15pin Connector (D-SUB) H DVI-D 24pin Connector (DVI-D) I Audio Connector (AUDIO IN) J AC Connector (AC IN) K Keyhole for Security Lock L NOTE You can fasten a security lock and cable to prevent the
ページ14に含まれる内容の要旨
CONNECTING YOUR MONITOR : ProLite B1706S Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. B Connect the monitor to the audio equipment with the Audio Cable for computer when using the C audio features. Connect the Power Cable to the monitor fi rst and then to the power supply. D Power of the monitor and the computer is turned on. E The signal cables used for connecting the computer and monitor may vary with t
ページ15に含まれる内容の要旨
CONNECTING YOUR MONITOR : ProLite E1706S Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. B Connect the monitor to the audio equipment with the Audio Cable for computer when using the C audio features. Connect the Power Cable to the monitor fi rst and then to the power supply. D Power of the monitor and the computer is turned on. E NOTE The signal cables used for connecting the computer and monitor may vary w
ページ16に含まれる内容の要旨
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 29: COMPLIANT TIMING. ADJUSTING THE VIEWING ANGLE : ProLite E1706S For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 20 degrees upward, 5 degrees downward. In order to ensure a healthy and relaxed body position when using the monitor at
ページ17に含まれる内容の要旨
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1706S For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. 110mm You are able to adjust the monitor's height up to 110mm, angle up to 170 degrees right and left, 20 degrees upward. NOTE Do not touch the LCD sc
ページ18に含まれる内容の要旨
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 20 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the + / - Buttons. Luminance Contrast 50 Brightness 50 Eco Off
ページ19に含まれる内容の要旨
ADJUSTMENT MENU CONTENTS Luminance Luminance Contrast 50 Brightness 50 Eco Off Picture Mode Standard ACR ON Adjustment Item Problem / Option Button to Press Too dull Contrast Too intense Too dark Brightness * Too bright Off Normal Mode1 Brightness of back-light is reduced. Eco Direct Mode2 Brightness of back-light is reduced more than Mode1. Brightness of back-light is reduced more than Mode2. Mode3 For general windows environment and monitor Standard defau
ページ20に含まれる内容の要旨
Image Setup Image Setup Clock 50 Only Analog Input Phase 50 H.Position 50 V.Position 50 Adjustment Item Problem / Option Button to Press Too narrow Clock* Too wide Phase* To correct fl ickering text or lines Too left H. Position Too right Too low V. Position Too high * See page 20 for SCREEN ADJUSTMENTS. OPERATING THE MONITOR 15 ENGLISH
