ページ1に含まれる内容の要旨
HP ZR2040w, ZR2240w, ZR2440w and
ZR2740w LCD Monitors
User Guide
ページ2に含まれる内容の要旨
© 2011, 2012 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contai
ページ3に含まれる内容の要旨
About This Guide This guide provides information on setting up the monitor and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. iii
ページ4に含まれる内容の要旨
iv About This Guide
ページ5に含まれる内容の要旨
Table of contents 1 Product Features ............................................................................................................................................ 1 ZR2040w Model ................................................................................................................................... 1 ZR2240w Model ................................................................................................................................... 2 ZR2440w Model .........
ページ6に含まれる内容の要旨
ZR2240w Model ................................................................................................................................. 30 ZR2440w Model ................................................................................................................................. 31 ZR2740w Model ................................................................................................................................. 32 Preset Display Resolutions ................................
ページ7に含まれる内容の要旨
1 Product Features The LCD (liquid crystal display) monitors have an active matrix of thin-film transistors (TFT). All models have the following features: ● Mercury-free LED backlight ● Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side ● Removable pedestal and VESA-standard mounting holes for flexible mounting solutions ● Support for the optional HP speaker bar (purchased separately) ● Plug and play capability when supported by the operating system ●
ページ8に含まれる内容の要旨
ZR2240w Model Features of the ZR2240w model include: ● 54.72 cm (21.5-inch) diagonal viewable area display with 1920 × 1080 resolution, plus full- screen support for lower resolutions ● Video signal input to support VGA analog with VGA signal cable provided ● Video signal input to support DVI digital with DVI-D signal cable provided ● Video signal input to support HDMI digital ● Dynamic Contrast Ratio: 2,000,000:1 ● Video signal input to support DisplayPort digital with DisplayPort signal cable
ページ9に含まれる内容の要旨
● 8-way comfort adjust including Height, Tilt, Pivot and Swivel adjustments ● HP Quick Release 2 is now a flush mount solution that lets you quickly install the panel with a simple click and remove it with the convenient sliding tab release ● Easy access pull-out information card with the information needed for a support call ● On-Screen Display (OSD) adjustments in several languages for ease of setup and screen optimization ● HP Display Assistant utility software for adjusting monitor settings
ページ10に含まれる内容の要旨
ZR2740w Model Features of the ZR2740w model include: ● 68.74 cm (27-inch) diagonal viewable area display with 2560 x 1440 resolution ● Video signal input to support DVI digital with DVI-Dual Link signal cable provided ● Video signal input to support DisplayPort digital with DisplayPort signal cable provided ● USB 2.0 hub with one upstream (connects to the computer) and four downstream (connect to USB devices) ports ● USB cable included to connect to the monitor's USB hub and to a USB connector o
ページ11に含まれる内容の要旨
2 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor. Installing the Pedestal NOTE: Do not install the pedestal if the monitor will be used on a wall, swing arm, or other mounting fixture; instead see Mountin
ページ12に含まれる内容の要旨
Models ZR2240w, ZR2440w, and ZR2740w use the HP Quick Release 2 mechanism for easy moving of the monitor. To mount the panel onto the pedestal: 1. Slide the mounting plate on the pedestal under the upper lip of the recess in the back of the panel. 2. Lower the pedestal into the recess until it snaps into place. 3. The HP Quick Release 2 latch pops up when the monitor is locked in place. Figure 2-2 Mounting the Panel onto the HP Quick Release 2 Rear Components ZR2040w Model Figure 2-3 ZR2040w R
ページ13に含まれる内容の要旨
ZR2240w Model Figure 2-4 ZR2240w Rear Components 10 10 1111 22 32 1 42 52 62 27 8 9 Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. NOTE: Putting the switch in the Off position will yield the lowest power state for the monitor when not in use. 3 AC Power Connector Connects the AC power cord to the monitor. 4 DisplayPort Connector Connects the DisplayPort cable to the monitor. 5 HDMI Connector Co
ページ14に含まれる内容の要旨
Component Function 10 Information Card Provides information needed for a support call. 11 USB Downstream Connectors Connects optional USB devices to the monitor. (side panel) ZR2440w Model Figure 2-5 ZR2440w Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. NOTE: Putting the switch in the Off position will yield the lowest power state for the monitor when not in use. 3 AC Power Con
ページ15に含まれる内容の要旨
Component Function 5 Analog Audio Output Connects an audio cable with 3.5 mm L/R mini-plug to the monitor. 6 DisplayPort Connector Connects the DisplayPort cable to the monitor. 7 HDMI Connector Connects an HDMI cable to the monitor. 8 DVI-D Connector Connects the DVI-D cable to the monitor. 9 USB Upstream Connector Connects the monitor USB hub cable to a host USB port/ hub. 10 USB Downstream Connectors Connects optional USB devices to the monitor. 11 Information Card Provides information about
ページ16に含まれる内容の要旨
ZR2740w Model Figure 2-6 ZR2740w Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. NOTE: Putting the switch in the Off position will yield the lowest power state for the monitor when not in use. 3 AC Power Connector Connects the AC power cord to the monitor. 4 DisplayPort Connector Connects the DisplayPort cable to the monitor. 5 DVI-D Connector Connects the DVI-D cable to the moni
ページ17に含まれる内容の要旨
Routing and Connecting the Cables Place the monitor in a convenient, well-ventilated location near the computer. ZR2040w Model The cable-restraining bar on the pedestal of the ZR2040w is held in place by four tabs. Figure 2-7 Cable-Restraining Bar 1. To remove the bar, first pull one end of the bar away from the pedestal (1). When it is free, the bar can be removed (2). 2. Connect the video cables provided to the connectors shown in ZR2040w Model on page 6. You do not have to connect them all.
ページ18に含まれる内容の要旨
4. Connect the AC power cord and plug it into the wall outlet. WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the equipment by unplugging the power cord from the electrical outlet. For your safety, do not place anything on power cords or cables. Arra
ページ19に含まれる内容の要旨
ZR2240w, ZR2440w, and ZR2740w Models 1. Remove the cable routing cover by pulling it straight off the front of the column. Figure 2-9 Cable Routing Cover 2. Before connecting the cables, route them through the cable routing hole in the column (1) and replace the cable routing cover (2). Figure 2-10 Cable Routing Routing and Connecting the Cables 13
ページ20に含まれる内容の要旨
3. Connect the desired signal sources. Refer to the drawings in (Rear Components on page 6) to identify the connectors on your monitor. For each one, plug in one end of the appropriate cable. Attach the other end to your computer or other video source. The ZR2440w model supports audio output from the HDMI and DisplayPort inputs. Use the RCA jack for digital output and the 3.5 mm mini-jack for analog 2.0 Sound. NOTE: It is not necessary to connect all the connectors to video sources. 4. If you wi
