ページ1に含まれる内容の要旨
HP L1750, L1950, L1710, L1910, L1908w,
L1908wm, L1945w, L1945wv, L2208w, and
L2245w LCD Monitors
User Guide
ページ2に含まれる内容の要旨
© 2007, 2008 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, o
ページ3に含まれる内容の要旨
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
ページ4に含まれる内容の要旨
iv About This Guide
ページ5に含まれる内容の要旨
Table of contents 1 Product Features HP LCD Monitors ................................................................................................................................. 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 3 Maintenance Guidelines ..............................................................................................................
ページ6に含まれる内容の要旨
Sleep Timer Mode .............................................................................................................................. 30 HP Display LiteSaver ......................................................................................................................... 31 Installing the HP Display LiteSaver Software .................................................................... 31 sRGB Support .............................................................................
ページ7に含まれる内容の要旨
Restriction of Hazardous Substances (RoHS) ................................................................... 54 Appendix D LCD Monitor Quality and Pixel Policy vii
ページ8に含まれる内容の要旨
viii
ページ9に含まれる内容の要旨
1 Product Features HP LCD Monitors The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor models and features include: L1750 model, 43.2 cm (17-inch) diagonal viewable area display with 1280 × 1024 resolution, plus ● full-screen support for lower resolutions L1950 model, 48.3 cm (19-inch) diagonal viewable area display with 1280 x 1024 resolution, plus ● full-screen support for lower resolutions ● L1710 model, 43.2 cm (17-inch) diagon
ページ10に含まれる内容の要旨
Swivel and height adjustment capabilities (select models) ● Removable base for flexible monitor panel mounting solutions ● ● Video signal input to support VGA analog with VGA signal cable provided ● Video signal input to support DVI digital with DVI-D signal cable provided (select models) ● USB 2.0 hub with one upstream (connects to the computer) and two downstream (connects to USB devices) ports (select models) ● USB cable provided to connect the monitor's USB hub to the USB connector on the co
ページ11に含まれる内容の要旨
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 52 in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important
ページ12に含まれる内容の要旨
Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ ● back plate of the monitor
ページ13に含まれる内容の要旨
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Unfolding the Double-Hinged Monitor Pedestal Base 1. Lift the monitor from its box and place it on a flat surface with the display head facing up. 2. Pivot the display head from portrait to landscape position (1). 3. Remove the swivel locking pin (2). Figure 3-1 Removing the Swivel Locking Pin Unfolding the Double-Hi
ページ14に含まれる内容の要旨
4. Using both hands on the outer edges of the display bezel, pull up gently on the monitor display head (1) to extend the pedestal base (2) to the desired height. CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non- uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition. Figure 3-2 Unfolding the Monitor Pedestal Base 6 Chapter 3 Setting Up the Monitor
ページ15に含まれる内容の要旨
Unfolding the Single-Hinged Monitor Pedestal Base 1. Lift the monitor from its box and place it face down on a flat surface covered by a soft, clean cloth. 2. Hold down the monitor display head with one hand and unfold the base 90 degrees with the other hand. CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non- uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition. Figure 3-3 Unfolding
ページ16に含まれる内容の要旨
Rear Components Figure 3-4 Rear Components Component Function 1 AC Power Connector Connects the AC power cord to the monitor. 2 Audio In (select models) Connects the audio cable to the monitor's internal speakers (select models) 3 USB Downstream Connects optional USB devices to the monitor. Connectors (2) (select models) 4 USB Upstream Connects the USB hub cable to the monitor's USB hub Connector (select connector and to a host USB port/hub. models) 5 DVI (select models) Connects the DVI-D cabl
ページ17に含まれる内容の要旨
Cable Management Use the cable management feature to secure and hide your cables when viewed from the front. Before connecting the cables to monitor models with a single-hinged base, route the cables through the hole in the center of the monitor stand. Figure 3-5 Using the Cable Management Feature (Single-Hinged Base) After connecting the cables to monitor models with a double-hinged base, place the cables through the cable management channels on the sides of the monitor base. Figure 3-6 Using
ページ18に含まれる内容の要旨
Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect a VGA signal cable or DVI-D signal cable. NOTE: For models with both VGA and DVI-D connectors, the monitor is capable of supporting either analog or digital input. The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the +/Input button on the front panel or through
ページ19に含まれる内容の要旨
4. Connect one end of the provided USB cable to the USB hub connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor (on select models). Figure 3-8 Connecting the USB Cable WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
ページ20に含まれる内容の要旨
5. Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 3-9 Connecting the Power Cable Adjusting the Monitor NOTE: Your monitor model may look different than the model in the following illustrations. 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-10 Tilting the Monitor 12 Chapter 3 Setting Up the Monitor
