ページ1に含まれる内容の要旨
StarBoard T-19WX
Notices
Reproduction or reprinting, without permission, of this manual or any part thereof is prohibited.
The contents of this manual are subject to change without prior notice.
Every effort has been made to ensure that this manual is complete and correct. However, should
any questionable points, mistakes, etc., come to your attention, please inform the vendor.
Please be advised in advance that this company will assume no responsibility for losses, etc.,
resulting
ページ2に含まれる内容の要旨
StarBoard T-19WX Product Assurance Provisions This product is limited to use in the country where the user bought this product. For warranty details, refer to Appendix 3.6 at the end of this user’s guide. This First edition of the user’s guide (T19WX-EU090601) is for the following products: 70.53K02G00x (StarBoard T-19WX) , AH00219 * The term “x” as used in this manual denotes the model No. of the product. The StarBoard T-19WX incorporates WALTOP’s 19-inch LCD monitor integrated
ページ3に含まれる内容の要旨
Safe Handling StarBoard T-19WX Safe Handling Markings and Symbols Various markings and symbols are used in this user’s guide and on this product, to ensure the safe and correct use of this product and to prevent personal injury and property damage. These symbols and their meanings are as explained below. Understand the information well before reading the body of the user’s guide. This is the safety alert symbol. It is used to alert you to potential personal injury hazards
ページ4に含まれる内容の要旨
Safe Handling StarBoard T-19WX Always comply with them Safety Precautions WARNING Securely insert the power plug into the Before moving this product, detach the power socket. power plug and the power cable. If it is not plugged in securely, The power cable might be damaged, overheating will occur, possibly possibly resulting in electric shock resulting in electric shock or fire. or fire. Do not plug in the power plug with a wet When plugging in or unplugging the hand
ページ5に含まれる内容の要旨
Safe Handling StarBoard T-19WX Always comply with them Safety Precautions WARNING Do not use a power cable other than the Do not open or alter the cabinet of this accessory power cable. product. If a power cable other than the The cabinet contains high-voltage accessory power cable is used, fire areas, so electric shock or other or electric shock might result. injury will result. Unplug the power plug if you do not plan on using the product for an extended period
ページ6に含まれる内容の要旨
Safe Handling StarBoard T-19WX Always comply with them Safety Precautions WARNING In the following cases, unplug the product from the AC Adaptor socket and ask the technical support of Hitachi Software. a. After the power cord or AC Adaptor plug is damaged. b. After liquid is spilled onto the main unit. c. After the main unit is exposed to rain or water. d. After this product malfunctions, even when operated according to the instruction manual. Adjust this product within
ページ7に含まれる内容の要旨
Safe Handling StarBoard T-19WX Careful thought was given to the cautions on this device and in this user’s guide. However, unanticipated circumstances might occur. When operating this product, users themselves must exercise caution as well as follow instructions. WARNING Warning Details Page Use the AC Adaptor supplied with this product. Use only AC Adaptor or power cables specified by the manufacturer. Use 1-9 of improper adaptors or cables can damage the product or cause a
ページ8に含まれる内容の要旨
StarBoard T-19WX Contents 1. Introduction ................................................................................................. 1-1 1.1 Preparations before Use...................................................................................... 1-1 1.1.1 Product Overview...................................................................................................... 1-1 1.1.2 Features ...................................................................................
ページ9に含まれる内容の要旨
Introduction StarBoard T-19WX 1. Introduction 1.1 Preparations before Use This section covers preparations before using the StarBoard. Please read this section thoroughly if you are using the StarBoard for the first time. 1.1.1 Product Overview StarBoard T-19WX is a convenient and easy-to-use tablet-type interactive electronic board that lets you operate a PC with a stylus pen, and write text and images to a PC screen in real time as well as simultaneously input those to the PC. Th
ページ10に含まれる内容の要旨
Introduction StarBoard T-19WX 1.2 Parts Check After unpacking, make sure that all of the following parts are included. Parts No. Name Qty. (1) 19-inch Tablet monitor 1 (2) Stylus pen 1 (3) AAA alkaline dry cell 1 (4) Spare pen tips 2 (5) AC adapter 1 (6) Power cable (*1) (7) RGB cable (1.8m) 1 (8) USB cable (1.5m) 1 (9) Audio cable (stereo mini-plug) 1 (10) Pen tip replacement pin set 1 (11) StarBoard Software x.x (CD-ROM) (*2) 3 (12) StarBoard T-19WX User’s Guide (this manu
ページ11に含まれる内容の要旨
Introduction StarBoard T-19WX 1.3 Part Names and Functions 1.3.1 Front Screen (1) (4) (5) (3) (2) (1) LCD and tablet operating area (4) Front switch panel Receives text and graphical These switches are used to turn the information entered with the stylus power ON/OFF, enter OSD menu pen, and transmits the data to a PC. settings, and adjust the volume. (2) Stand (bottom of body and back) (5) Function buttons The stand serves to hold the Ei
ページ12に含まれる内容の要旨
Introduction StarBoard T-19WX 1.3.2 Front Switch Panel (5) (6) (4) (1) (3) (2) (1) Power button (4) MENU/SELECT button This button turns the StarBoard This button is used to display the LCD monitor ON/OFF. OSD menu. Press it after making menu selections to apply those. (2) Power indicator This indicator turns green when (5) button power is supplied normally to the This button is used to toggle muting StarBoard and an image signal is ON/OFF. It is a
ページ13に含まれる内容の要旨
Introduction StarBoard T-19WX 1.3.3 Connector Panel (5) (4) (1) (2) (3) (4) (5) StarBoard Bottom View (1) USB port (4) VGA input port A USB cable is connected here. This port is used to connect a PC via RGB cable to display images from (2) Power port the PC. The AC adapter is connected here. (5) Audio input port (3) VGA output port This port is used to output PC audio This port is used to connect external from the StarBoard speakers. The de
ページ14に含まれる内容の要旨
Introduction StarBoard T-19WX 1.3.4 Function Buttons (1) (2) (3) (4) (5) (6) (7) (8) (1) ToolBar hide/un-hide (5) Topic list Hides/displays StarBoard Software Hides/displays the Topic List. ToolBar. (6) Solid pen (2) New blank page Switches to solid pen. Adds a new blank page. (7) Fluorescent marker pen (3) Previous page Switches to fluorescent marker pen. Displays the page before the currently displayed page. (8) PC screen Launches PC Operation
ページ15に含まれる内容の要旨
Introduction StarBoard T-19WX 1.4 Assembly and Setup Keep the following points in mind when installing the StarBoard. Select a stable, flat location. Avoid installing in locations that are dusty, extremely hot, cold, or humid. Also avoid installing in locations exposed to direct sunlight. 1.4.1 Adjusting the Stand CAUTION Hold the body firmly and slide the stand slowly when adjusting it. When adjusting the stand, if you pull up the lever without holding onto the body
ページ16に含まれる内容の要旨
Introduction StarBoard T-19WX (2) Slide the stand to the desired angle, and release the lever. Use the screen at an easily viewable angle, taking into account external light and ceiling lighting, which may reflect off the screen. 8° 75° (3) Check that the lever and stand are secure. 1.4.2 How to Use the Pen Holder The T-19WX comes with a pen holder on the back side. Store the stylus pen in the pen holder when not in use.
ページ17に含まれる内容の要旨
Introduction StarBoard T-19WX 1.4.3 Connection Procedure Before Connecting Equipment Install the StarBoard Software on your PC before connecting equipment. Equipment may not function normally if connections are made without first installing the software. WARNING Use the AC Adaptor supplied with this product. Use only AC Adaptor or power cables specified by the manufacturer. Use of improper adaptors or cables can damage the product or cause a fire. N
ページ18に含まれる内容の要旨
Introduction StarBoard T-19WX (1) Connect the RGB cable to the VGA input port on the side of the StarBoard, and tighten the screws to fasten. Connect the other end of the cable to the PC VGA port, and tighten the screws to fasten. (2) Connect the USB cable to the USB port on the side of the StarBoard. Connect the other end of the cable to a USB port on the PC. (3) Connect the audio cable to the audio input port on the side of the StarBoard. Connect the other end of the cable to the
ページ19に含まれる内容の要旨
Usage StarBoard T-19WX 2. Usage Procedures This section describes the basic procedures for using StarBoard. For information on using advanced StarBoard features, see the StarBoard Software x.x. User's Guide, or StarBoard Software x.x Online Help. 2.1 Turning the StarBoard On This section describes how to turn the StarBoard on. (1) Turn on the StarBoard power. Push the power button (2) Turn on the PC and allow Windows to start. (3) The StarBoard Softwar
ページ20に含まれる内容の要旨
Usage StarBoard T-19WX 2.2 Using the Stylus Pen This section describes how to use the StarBoard stylus pen. 2.2.1 How to Use the Stylus Pen The stylus pen has a power switch. Battery life can be prolonged by switching the power switch OFF when not in use. To draw characters and figures using the stylus pen, set the power switch of the stylus pen to the ON position. ON/OFF switch Push the switch ON OFF 2.2.2 Basic Stylus Pen Operations The stylus pen can be use
