ページ1に含まれる内容の要旨
FCC
GRAND MULTI VIEW
USB to VGA/ HDMI Monitor
CE
User’s Manual
ISSUE: 2008/05/05
P/N: 3449800
ページ2に含まれる内容の要旨
1. Package Contents INDEX This package contains the following items ： 1. Package Contents……………..…....…………………….. 1 2. Introduction………………..………..……….……………... 1 3. System Requirement….…………….…..………………… 1 4. Product Features…….………….…………….…………... 2 5. Hardware Overview……………..…………….…………... 2 Grand Multi View 6. Installation…………………………..………..……..……… 3 USB Cable 7. Using the Multi View…...……...…………………….….… 3 Driver CD (Driver & User Manual) 7.1 Using the Multi View DisplayLink Mana
ページ3に含まれる内容の要旨
4. Product Features 6. Installation Plug & play. Installs in seconds. Step 1: Insert the provided driver CD into your CD-ROM driver, then execute the Setup.exe Easily connect up to 6 (Windows OS)/ 4 (Mac OS) monitors to one PC through USB file and select your language to install. 2.0. Supports VGA and HDMI outputs. Supports resolution up to 1600 x 1200 or 1680 x 1050 (32 bit true color). Bundled Software: - Supports Extended and Mirror Functions - Supports screen resolu
ページ4に含まれる内容の要旨
Screen Resolution: Select the screen resolution (available only in extended mode). Extend to: Reposition the extended screen to the top, bottom, left or right of the primary display. Extend: Set the Multi View to Extended mode. Color Quality: Select the screen color quality (available only in extended mode). Mirror: Set the Multi View to Mirror mode. You can see the same desktop image on the additional monitor. Screen Rotation: Rotate the screen on the additional mon
ページ5に含まれる内容の要旨
Off: Disable the Multi View on the system. 7.3 Firmware Update Manually Update Click the Updates → Check Now…, and it will check and download the latest firmware immediately.. NOTE: Confirm that your computer is already connected to the network. Advanced: Directly access the Display Properties. You can also adjust the resolution, color quality, position and refresh rate via the Display Properties. Automatic Update Click the Updates → Configure… , the Updates Options
ページ6に含まれる内容の要旨
8. Uninstall the Device Driver 9. Troubleshooting Follow the steps below to uninstall the driver of the Multi View. Situation Check Point Step 1: Open the Control Panel: Start → Control Panel → Add or Remove Programs. Step 2: Select USB-VGA-HDMI DisplayLink Adapter and click Remove. 1. Make sure you restart your computer after the driver installation. 2. Check all the connectors are plugged in correctly. 3. Make sure the USB port that you are using is USB The device driver has 2.0
