ページ1に含まれる内容の要旨
English
Monitor
Operating Manual
SCENICVIEW A20W-3/A22W-3
ページ2に含まれる内容の要旨
Are there… ... any technical problems or other questions which you would like to be clarified? Please contact our help desk (see Warranty Booklet). The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
Published by Fujitsu Siemens Computers GmbH Order No.: A26361-K1177-Z120-1-7619 Edition 1 AG 06/07
ページ5に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 LCD monitor Operating Manual Juni 2007 edition
ページ6に含まれる内容の要旨
VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association. Copyright © Fujitsu Siemens Computers GmbH 2007 All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification re
ページ7に含まれる内容の要旨
Contents Introduction........................................................................................................................................... 1 Notational conventions ................................................................................................................. 2 Important notes..................................................................................................................................... 2 Safety notes............................
ページ8に含まれる内容の要旨
Contents A26361-K1177-Z120-1-7619, edition 1
ページ9に含まれる内容の要旨
Introduction Your new LCD (Liquid Crystal Display) monitor SCENICVIEW A20W-3/A22W-3 offers numerous features and functions, for example: ● TFT display (Thin Film Transistor; active matrix) ● minimal space requirements thanks to slim casing ● optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) ● high degree of brightness and good contrast ● high resolution 1680 x 1050 (A20W-3/A22W-3) ● presentation of up t
ページ10に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. ! Supplementary information, remarks, and tips follow this symbol. i ► Text which follows this symbol describes activities that must be performed in the order shown. "Quotation marks" indicate names
ページ11に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 ● No data transfer cables should be connected or disconnected during a thunderstorm. ● Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the device (danger of electric shock, short circuit). ● The device is not waterproof! Never immerse the device in water and protect it from spray water (rain, sea water). ● In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the u
ページ12に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 Power cable To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set. ● The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements. ● The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath. ● For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floo
ページ13に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation. NOTE: This equipment has been tested and found to comply with the limits for a "Class B" digital device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference- Causing Equipment Standard ICES-003 for digital a
ページ14に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 Energy Star Guidelines The Fujitsu Siemens LCD monitor SCENICVIEW A20W-3/A22W-3 is designed to conserve electricity by dropping to less than 1 W when it goes into standby, suspend and OFF mode. With this new power management the LCD monitor SCENICVIEW A20W-3/A22W-3 qualifies for the U.S. Environmental Protection Agency's (EPA) Energy Star Computers award. The EPA estimates that computer equipment uses 5 % percent of all business electricity and that this is gr
ページ15に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 Checking the contents of the consignment The display surface of the LCD monitor is sensitive to pressure and scratches. Always hold the device by the casing! ! ► Unpack all the individual parts. ► Check the delivery for damage incurred during transportation. ► Check whether the delivery agrees with the details in the delivery note. The complete LCD monitor package includes: – one monitor – one data cable (D-SUB) – one audio cable – one power cable – one
ページ16に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 Installing an ergonomic video workstation 2 1 1 Avoid glare from electric 1 = Windows 1 = Edge of desk lighting. 2 = Permissible reaching Avoid direct and reflected glare. sector Position the keyboard where it is easiest to reach. 1 0° 65° 30° 60° 30° 65° 2 2 1 = Bearing surface for palms Example layout of monitor, 1 = Preferred viewing distance keyboard and copy-holder 2 = Permissible viewing of hands 2 = Reaching area for distance
ページ17に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 Mounting and removing the monitor base Mounting monitor base The display surface is susceptible to scratching! Therefore, lay the monitor on a soft surface when mounting or removing the monitor base. ! A26361-K1177-Z120-1-7619, edition 1 9
ページ18に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base: The display surface is susceptible to scratching! ! ► Switch off the monitor and pull the power plug out of the power socket. ► Lay the monitor on its face on a soft surface. ► Remove the screws on the rear of the monitor. You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 100 mm hole spacing. For instructions on how to mou
ページ19に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 Connecting the monitor Please take note of the safety information in the "Important notes" chapter. ! CE conformance and optimum picture quality are guaranteed only if you use the data cables supplied. Do not cover the ventilation openings of the monitor. The computer power plug must be pulled out! ► Be sure that the monitor and the computer are switched off. Connecting cables to the monitor 1 = Power connector 2 = D-SUB connection socket (ANALOG)
ページ20に含まれる内容の要旨
SCENICVIEW A20W-3/A22W-3 ► Mount the cover over the connections. A lock (Kensington Lock) can be mounted in the security slot (4) to protect the monitor from theft. A Kensington Lock is not included in the consignment of the monitor. i Connecting cables to the computer Information on the computer connections and interfaces is contained in the operating manual for your computer. If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the m
