ページ1に含まれる内容の要旨
POWER
T-910CM
9 Universal Ceiling Mount Monitor
M
E
MENU
EXIT AV
ON OFF
OWNER S MANUAL
ページ2に含まれる内容の要旨
SPECIFICATIONS Power Requirements DC 12V Power Consumption 9W Screen Size 9 TFT-LCD Screen Format 16:9 Resolution Pixel 1920x234 A/V Inputs 2 A/V RCA Inputs Dimensions(With shroud) 11.3(L)X9.6(W)X2.4(H)inches Dimensions(Without shroud) 10.8(L)X9.4(W)X2.1(H)inches IR Power Requirements DC 12V IR Power Consumption 3W IR Transmitter Frequency Right 2.8MHz Left 2.3MHz LCD Panel Type Active Matrix TFT NTSC/PAL Auto Select Compatible video standard Note : This equipment has been tested and found to co
ページ3に含まれる内容の要旨
POWER POWER HOW TO OPERATE THE MONITOR CONTENTS Releasing the Monitor Push the open button (located on the front edge of the screen housing) and lower the monitor to the desired angle. You can also adjust the , Please read this User s Manual in detail and use the set properly. swivel angle. CAUTION 4 M E EXIT AV MENU ON OFF INSTALLATION 5 NAME AND FUNCTION OF EACH PARTS 6 Make this arrow in DOWN direction only. Unit 6 Remote Control 7 PULL BUTTON CONNECTIONS 8 HOW TO OPERATION THE MONITOR 9 Rele
ページ4に含まれる内容の要旨
P E OW R A V CAUTION CONNECTIONS , Please read and observe all warnings and instructions in this owner s manual and those marked on the unit. Retain this booklet for future reference. There are two kinds of alarm symbols as follows: The lightening flash with arrowhead symbol within an equilateral Red AUDIO(R) triangle is intended to alert the user to the presence of , GAME dangerous voltage within the product s enclosure that may be White AUDIO(L) of sufficient magnitude to constitute a risk of
ページ5に含まれる内容の要旨
POWER CAUTION NAME AND FUNCTION OF EACH PART MENU Button POWER Button OSD MENU EXIT Button Dome Light Button CAUTION Watching the monitor for an Quality installations are best extended period of time performed by qualified and M with the engine turned off E MENU AV EXIT certifled installers. may deplete the vehicle s battery. ON OFF This product is designed for operation with a 12 Volt DC, Don t touch the unit if there is negative ground vehicle. It a flash of lightning. It may is not suitable f
ページ6に含まれる内容の要旨
POWER POWER INSTALLATION NAME AND FUNCTION OF EACH PART 1. Open the package and check that these items are presents. Unit Dome light INSTALLATION PLATE UNIT SCREW A SCREW B M E MENU EXIT AV OFF ON 2. Connect the external compoments to the RCA cable or AV output. (Refer to the connection diagram on page 8) 3. Match the position of installation bracket and installation plate with screw A. Infrared Transmitter Monitor (Front) M MENU PLAY AV ON OFF Reset Audio Video 4. Tighten the unit with the supp
