ページ1に含まれる内容の要旨
DM-D110/D210
User’s Manual . . . . . . . . . 1
用户手册 . . . . . . . . . . . . . 11
ユーザーズマニュアル . . 21
410809700
ページ2に含まれる内容の要旨
English A B 2 3 6 1 4 5 C 8 7 9 10 14 12 13 11 D 15 16 ii DM-D110/D210
ページ3に含まれる内容の要旨
English F E 17 22 18 19 21 20 G 24 23 25 26 29 27 28 30 H 31 32 I 33 34 35 36 DM-D110/D210 iii
ページ4に含まれる内容の要旨
English J 90° 48° K 330° 36° L 37 38 ON 1 2 3 4 5 6 7 8 39 iv DM-D110/D210
ページ5に含まれる内容の要旨
English M 2 1 1 N 1 2 DM-D110/D210 v
ページ6に含まれる内容の要旨
English vi DM-D110/D210
ページ7に含まれる内容の要旨
English English DM-D110/D210 User’s Manual Illustrations All of the illustrations are at the beginning of this manual. They are identified by letters (A, B, C . . .). Some of the illustrations have numbers in them. See the list below for the meaning of the numbers. Illustration A: Illustration E: Illustration I: 1. Screen 17. Screen 33. Grooves (1 or more) 2. DM-D110 18. DM-D210 34. Inch Screws 3. DIP switch (rear side of the 19. POWER Switch (rear side of the 35. Metric Screws display) displa
ページ8に含まれる内容の要旨
English All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for e
ページ9に含まれる内容の要旨
English FCC Compliance Statement For American Users This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
ページ10に含まれる内容の要旨
English The horizontal rotating angle of the screen unit is limited by a stopper. Do not apply excess force to rotate the screen unit past the limit set by the stopper. Doing so may cause damage. When you are attaching and detaching the cable, always check that the power switches of the customer display and the unit that it is connected to are turned off. Take care when handling the customer display not to drop or knock it because it has a built-in fluorescent display tube. If you do not us
ページ11に含まれる内容の要旨
English Precautions when Installing ❏ Ensure that the power switches of the customer display and the device that it is connected to are turned off before connecting the cable. ❏ The RS-232 connector of the stand (DP-110/210) is fitted with inch screws (hex nuts). Replace these with the included metric screws if you need metric screws. The inch screws and metric screws can be distinguished by the presence or lack of grooves (see Illustration H). ❏ Refer to the DM-D110 Technical Reference Guid
ページ12に含まれる内容の要旨
English Self Test A self-test function is built into the DM-D110 and DM-D210. Execution of the self- test function can be configured using the DIP switches. Self-Test Items The self-test performs the following steps. ❏ Displays the version of the firmware ❏ Displays the configuration of the DIP switches ❏ Displays the configuration of the memory switches ❏ Introduces the display text ❏ Introduces each of the functions (brightness, blinking, scrolling, etc.) Executing the Self Test The self-test
ページ13に含まれる内容の要旨
English Transfer Speed Switching Transfer Speed SW1-5 SW1-6 SW1-7 (bps) ON ON ON 2400 OFF ON ON 4800 ON OFF ON 9600*1 OFF OFF ON 19200*2 ON ON OFF 38400 OFF ON OFF 57600 ON OFF OFF 115200 OFF OFF OFF (Reserved) *1 Default Setting *2 Setting that is used when connecting to the USB model of the EPSON TM printer. Jumper There are jumpers in the stand (DP-110/210) that configure whether a TM printer is connected to the DM-D110/210. CAUTION: Turn the power off before changing the jumper settings. C
ページ14に含まれる内容の要旨
English DM-D210 See Illustration G for the location of the jumpers. JP1 JP2 Details 1-2 1-2 Use this setting if you are connecting and using both the TM printer and this device. (Default Setting) 2-3 2-3 Use this setting if you are using the DM-D stand in a stand-alone configuration without connecting a TM printer. Specifications DM-D110 Model DM-D110 DM-D110 + DP110 DM-D110 + DP502 Display type Fluorescent tube display Number of characters 40 characters (20 columns × 2 rows, 5 × 7 dot matrix)
ページ15に含まれる内容の要旨
English DM-D210 Model DM-D210 DM-D210 + DP210 DM-D210 + DP502 Display type Fluorescent tube display Number of characters 40 characters (20 columns × 2 rows, 5 × 7 dot matrix) displayed Display color Green (505 nm) 2 Brightness 700 cd/m Character classes Alphanumeric: 95 characters International characters: 37 characters Graphic characters: 128 characters × 12 pages Character composition 5 × 7 dot matrix, comma/period/annunciator Character size 6.5 × 11.3 mm Character pitch 9.9 mm Interface Stand
ページ16に含まれる内容の要旨
English 10 DM-D110/D210 User’s Manual
