ページ1に含まれる内容の要旨
Elo TouchSystems 2240L 22-inch LCD
Touchmonitor User Guide
ページ2に含まれる内容の要旨
Elo TouchSystems 2240L 22-inch LCD Touchmonitor User Guide Revision B P/N E901936 Elo TouchSystems 1-800-ELOTOUCH www.elotouch.com
ページ3に含まれる内容の要旨
Copyright © 2008 Tyco Electronics. All Rights Reserved. No part of this publication may be reproduced, transmitted, tran- scribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or other- wise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change wi
ページ4に含まれる内容の要旨
Table of Contents Chapter 1: Introduction ....................................................................5 About the Product .............................................................................................................5 Precautions ......................................................................................................................... 5 Chapter 2: Installation And Setup ...................................................6 Unpacking Your Touchmonitor ......
ページ5に含まれる内容の要旨
C H A P T E R 1 INTRODUCTION About the Product Your new Elo TouchSystems 2240L open-frame touchmonitor com- bines the reliable performance of touch technology with the latest advances in Liquid Crystal Display (LCD) design. The monitor comes with the following features: • 22” color active matrix thin-fi lm-transistor (TFT) with a native resolution of 1680 X 1050. • Available in Acoustic Pulse Recognition (APR), IntelliTouch, SecureTouch, and Surface Capacitive touch technologie
ページ6に含まれる内容の要旨
C H A P T E R 2 INSTALLATION AND SETUP This chapter discusses how to install and set up the LCD touchmonitor and how to install Elo TouchSystems driver software. Elo TouchSystems 2240L User Guide 6
ページ7に含まれる内容の要旨
Unpacking Your Touchmonitor Check that the following items are present: AND/ OR USB Cable Serial Cable Touchmonitor (including integrated OSD control) AND/ OR VGA Video Cable DVI-D Cable Power Cable (appearance of cable (not included with differs according to some European or region) Asian models) OSD Remote Control Box Mounting Brackets TouchTools CD and Quick Accessory (optional) (quantity: four) Install Guide Elo TouchSystems 2240L User Guide 7
ページ8に含まれる内容の要旨
Connecting the Cables to the Touchmonitor and Computer Connector Panel on Rear Side of Monitor LED Status Power Button USB Analog Video Power Cable Serial Cable DVI-D Cable OSD Cable Cable (not included Remote with some Control European Box models) Connector (Optional) To connect your touchmonitor to your computer and power source: 1 Connect one end of the power cable to the connector panel and the other end to the power outlet. 2 Connect either the USB cable OR the serial cable
ページ9に含まれる内容の要旨
Installing the Touch Driver Your Elo touchmonitor is Plug-and-Play compliant. Information on the video capabilities of the touchmonitor is sent to the video display adapter when the computer’s operating system starts. If the comput- er’s operating system detects the touchmonitor, follow the instructions on the screen to install a generic Plug-and-Play monitor. Elo TouchSystems touchscreen driver software that allows your touch- monitor to work with your computer is located on the enclosed CD.
ページ10に含まれる内容の要旨
Monitor Overview and Dimensions (IntelliTouch Model) Note: Detailed mechanical illustrations can be found at: www.elotouch.com Elo TouchSystems 2240L User Guide 10
ページ11に含まれる内容の要旨
Monitor Overview and Dimensions (Surface Capacitive Model) Elo TouchSystems 2240L User Guide 11
ページ12に含まれる内容の要旨
Monitor Mounting and Orientation When the monitor is mounted in the landscape orientation, the cable connection panel must be at the bottom, as shown in the illustration below. Rear View of Monitor—Landscape Orientation Top Bottom Cable Connection Panel Alternatively, the monitor may be mounted in the portrait orientation. For this orientation, the cable connection panel may be on either side, as shown in the illustrations below. Rear View of Monitor—Portrait Orientation Cable Connection E
ページ13に含まれる内容の要旨
Monitor Mounting and Orientation (continued) Landscape Orientation Angle Views The mounting orientation can be up to a 90° angle from vertical, as shown in the illustrations below. 90º 90º Elo TouchSystems 2240L User Guide 13
ページ14に含まれる内容の要旨
Monitor Mounting and Orientation (continued) Portrait Orientation Angle Views The mounting orientation can be up to a 90° angle from vertical, as shown in the illustrations below. 90° 90° Elo TouchSystems 2240L User Guide 14
ページ15に含まれる内容の要旨
Monitor Mounting and Orientation (continued) Mounting to 100 mm VESA Mount—Landscape Orientation Requires four (4) M4 thread hole Phillips head attaching screws (8 mm depth) Note: Dimensions are in millimeters. Detailed mechanical illustrations can be found at: www.elotouch.com Elo TouchSystems 2240L User Guide 15
ページ16に含まれる内容の要旨
Monitor Mounting and Orientation (continued) Mounting to 100 mm VESA Mount—Portrait Orientation Requires four (4) M4 thread hole Phillips head attaching screws (8 mm depth) Note: Dimensions are in millimeters. Detailed mechanical drawings can be found at: www.elotouch.com Elo TouchSystems 2240L User Guide 16
ページ17に含まれる内容の要旨
C H A P T E R 3 OPERATION About Touchmonitor Adjustments Your touchmonitor most likely will not require adjustment. However, variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your video source should be 1680 X 1050 resolution, at 60Hz vertical frame rate. Operating in other resolutions degrades video performance. For input video outside the refresh rate and dot clock ranges, the mo
ページ18に含まれる内容の要旨
Rear Panel Control Buttons for On-Screen Display (OSD) The rear panel control buttons for on-screen display (OSD) adjust- ments allow you to change settings on the monitor screen. There are fi ve buttons: 1 MENU 2 3 4 SEL (select) 5 (power switch) Elo TouchSystems 2240L User Guide 18
ページ19に含まれる内容の要旨
Rear Panel Control Buttons for On-Screen Display (OSD) (continued) Control Function MENU Displays/exits the OSD Menus 1) Enters contrast of the OSD (if no OSD is currently displayed on screen) 2) Increases value of OSD adjustment choice 3) Selects OSD choice counterclockwise 1) Enters brightness adjustment (if no OSD is currently displayed on screen) 2) Decreases value of OSD adjustment choice SEL 1) Automatically adjusts the image
ページ20に含まれる内容の要旨
On-Screen Display (OSD) Remote Control Box Accessory (optional) OSD Remote Control Buttons The On-Screen Display (OSD) Remote Control Box is an optional accessory that allows you to change settings on the monitor screen remotely. It has four buttons: 1 AUTO/SEL (select) 2 DOWN 3 UP 4 MENU OSD Menu Functions Use the control buttons for the following functions: Control Function AUTO/SEL 1) Automatically adjusts the image on the screen (this function not available
