ページ1に含まれる内容の要旨
Elo Entuitive Touchmonitor User Guide
1
ページ2に含まれる内容の要旨
Elo Entuitive Touchmonitor User Guide 19” LCD Desktop Touchmonitor 1925L Series Revision B P/N 008585 Elo TouchSystems, Inc. 1-800-ELOTOUCH www.elotouch.com Elo Entuitive Touchmonitor User Guide 2
ページ3に含まれる内容の要旨
Copyright © 2004 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems
ページ4に含まれる内容の要旨
Table of Contents CHAPTER 1 - INTRODUCTION .................................................................................................. 9 Precautions.................................................................................................................................... 7 About the Product.......................................................................................................................... 7 CHAPTER 2 - INSTALLATION AND SETUP .........................
ページ5に含まれる内容の要旨
Using the On-Screen Display (OSD) Menus ............................................................................... 29 Side Bezel Buttons.................................................................................................................. 30 OSD Menu Function – DVI-I Only ........................................................................................ 31 OSD Menu Function – Analog VGA Only............................................................................. 32
ページ6に含まれる内容の要旨
Elo Entuitive Touchmonitor User Guide 6
ページ7に含まれる内容の要旨
CHAPTER INTRODUCTION Congratulations on your purchase of an Elo TouchSystems Entuitive touchmonitor. Your new touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in LCD display design. This combination of features creates a natural flow of information between a user and your touchmonitor. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. See Appendix B fo
ページ8に含まれる内容の要旨
• Auto adjustment capability in analog mode • High quality full screen re-scaling • Multilingual OSD menus in 11 languages: English, French, German, Spanish, Italian, Swedish, Finnish, Danish, Portuguese, Dutch and Japanese • Serial or USB touch interface (USB requires Windows 98 SE, 2000, Me and XP.) • Built in speakers with volume control thorough OSD • Patented touch technology of Elo TouchSystems • VESA DDC 1/2B data communication • VESA DPMS power saving • Stand with minim
ページ9に含まれる内容の要旨
CHAPTER INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following 10 items are present and in good condition: OR USB touchscreen cable Serial cable LCD Display Analog video cable DVI-D video User Guide on CD, Quick Install Guide,
ページ10に含まれる内容の要旨
Speaker cable Composite cables S-video cable Elo Entuitive Touchmonitor User Guide 10
ページ11に含まれる内容の要旨
Product Overview Side View Elo Entuitive Touchmonitor User Guide 11
ページ12に含まれる内容の要旨
Elo Entuitive Touchmonitor User Guide 12
ページ13に含まれる内容の要旨
Touch Interface Connection Figure 2.1 Touchmonitor and Cables Figure 2.2 Touchmonitor Connections (Serial and USB) Elo Entuitive Touchmonitor User Guide 13
ページ14に含まれる内容の要旨
The following table indicates the LED status options for the Touch LED. LED Status On LED Status Off LED Status Blinking Contact Elo Support Contact Elo Support OK Step 1-Routing the Cables • The cables are routed through the cable management channel in the stand. Elo Entuitive Touchmonitor User Guide 14
ページ15に含まれる内容の要旨
Step 2-Connecting the Video Cables • Tilt the screen up and back to access the connection ports. • Connect the 15-pin video cable (the ferrite bead end), the 24-pin DVI-D cable, the RCA or the S-Video cable to the video port on your PC. • Connect the other end of the video cable to the video connector on your touchmonitor by routing the cable through the hole in the stand. • Secure the cable to your touchmonitor and PC by turning the screws on the connector clockwise. • Place t
ページ16に含まれる内容の要旨
Step 3-Connecting the Serial or USB Touchscreen Cable • Connect the female end of the serial (RS-232) cable to the serial port on the back of your PC, or connect the USB touchscreen cable to the USB touchscreen connector on the back of your touchmonitor. • Connect the male end of the cable to the serial touchscreen connector on your touchmonitor, or connect the other end of the USB touchscreen cable to your PC. • Secure the cable to your touchmonitor and PC by turning the scre
ページ17に含まれる内容の要旨
Step 4-Connecting the Speaker Cable NOTE: The monitor is equipped with both AC and DC power connectors. The monitor is shipped with only an AC power cable. • Depending on where you live, you will use either the European or US/Canadian power cable. • Connect the female end of the power cable to the power port on the touchmonitor. • Route the cable through the cable management clip. Elo Entuitive Touchmonitor User Guide 17
ページ18に含まれる内容の要旨
NOTE: To protect your equipment against risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a surge protector, and then connect the surge protector to a grounded AC electrical outlet. Elo Entuitive Touchmonitor User Guide 18
ページ19に含まれる内容の要旨
Tilt Lock Function You are able to lock the monitor in a desired position. • Pivot the monitor to the desired position. • Rotate the knob one full turn clockwise to lock the monitor in position. • Rotate the knob one full turn counter-clockwise to unlock the monitor from its position. Figure 2.3 Tilt Lock Function Optimizing the LCD Display To ensure the LCD display works well with your computer, configure the display mode of your graphic card to make it less than or equal to
ページ20に含まれる内容の要旨
VESA Mount on Your Touchmonitor Figure 2.4 Stand and Display Separation NOTE: The above drawing displays the VESA mounting interface after the removal of the mounting cover and base. NOTE: You will need a 3mm Hex Wrench for the following steps. • Remove the four screws in order to separate the stand from the monitor (see Figure 2.4). • Rotate the monitor 180° (ensuring the monitor will not be upside down when mounted in the position shown). • Reinstall the four screws. • Route
