ページ1に含まれる内容の要旨
English
User's Manual
®
FlexScan
T550
Color Display Monitor
ページ2に含まれる内容の要旨
CONTENTS PRECAUTIONS ...............................................................3 INTRODUCTION...............................................................7 About This Manual ................................................................ 7 Controls & Connectors .......................................................... 7 Package Contents ................................................................ 7 1 INSTALLATION ............................................................8 Connecti
ページ3に含まれる内容の要旨
PRECAUTIONS IMPORTANT! * This product has been adjusted specifically for use in the region to which it was originally shipped. The performance of the product, (i.e. picture geometry, picture positioning and color convergence E and purity in the case of color monitors) is optimally adjusted to the earth's magnetic field of the specific destination. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. * The manufacturer is
ページ4に含まれる内容の要旨
• Keep small objects away from the monitor. Small objects may accidentally fall through the ventilation slots into the cabinet, leading to fire, shock, or equipment damage. • Keep liquids away from the monitor. Spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the monitor immediately. Have the unit checked by a qualified service engineer before using it again. • Place the monitor on a strong, stable s
ページ5に含まれる内容の要旨
• To disconnect the power cord, grasp the plug firmly and pull. Never tug on the cord, doing so may cause damage and could result in fire or OK electric shock. E CAUTION • Disconnect the power cord, signal cables and remove the optional i·Sound™ sound unit and i·Station™ USB hub (if applicable) when moving the monitor. Moving the monitor with the cord attached or lifting it by the i·Sound sound unit or i·Station USB hub is dangerous. It may result in injury or equipment damage. • Handle w
ページ6に含まれる内容の要旨
Others • Do not install the monitor within an area subject to strong magnetic fields (for example, in the vicinity of a speaker, except the optional i·Sound unit, or a high-voltage transformer). Magnetic fields can cause noise, image shaking, and other distortions. • Generally, for maximum viewing comfort position the monitor slightly below eye level. Staring at the monitor for prolonged periods can cause eye strain. Be sure to take adequate rests. (A 10-minute rest period each hour is sugg
ページ7に含まれる内容の要旨
INTRODUCTION About This Manual This manual explains the precautions, specifications, and operation of your EIZO E monitor. Please read through this manual as it will help you to get the most out of your monitor. Controls & Connectors: Front Power indicator Indicates the power-on status, as follows: Solid green: Power is ON AUTO-SIZING button Flashing green: PowerManager Mode 1 Advance Notice Mode Automatically centers the displayed image, bringing Yellow: PowerManager Mode 2 Flashing Yellow: Of
ページ8に含まれる内容の要旨
1 INSTALLATION Connecting the monitor to the PC 1) Be sure that the power switches of both the PC and the monitor are OFF. 2) Plug the signal cable into the connector at the rear of the monitor. • When connecting the signal cable or cable adapter, first check that the shape at the cable side matches the shape at the connecting side. After connecting, secure the connection with the screw-in fasteners. 3)Plug the other end of the cable into the video connector on the rear of the PC. Refer to the
ページ9に含まれる内容の要旨
Using the AUTO-SIZING button After connecting the monitor to the E PC, first press the AUTO-SIZING button on the front panel. The AUTO-SIZING function centers the displayed image, aligning the image’s borders with respect to the monitor frame. In general, press the AUTO-SIZING button whenever changing the graphics board ro the resolution or when image size and/or position is incorrect. If further adjustment is required, adjust the picture size/position as desired using the Size/Position functio
ページ10に含まれる内容の要旨
2 SCREEN ADJUSTMENT How to use the ScreenManager Entering the ScreenManager Press the ENTER key to display the ScreenManager Main menu. Main menu Making the Adjustments and Settings 1)Select the desired icon using the Arrow keys, and then press the ENTER key to display the each adjustment/setting menu. Adjustment menu 2)Use the Control pad (the four Arrow keys and the ENTER key) to make the required adjustments and settings. Save & Exit 1)To save settings and return to the Main menu, press the E
ページ11に含まれる内容の要旨
Function (Arrow Keys Used) OSD E Adjusts: Horizontal image size (left/right) Size Vertical image size (up/down) Position Adjusts: Screen position Side- Adjusts: Side-pin balance (left/right) Side-pincushion (up/down) Pin Balance/ Side- Pincushion Parallelogram/ ·Tilts: image sides to sides (left/right) ·Expands: top side/bottom side, shirnking the Trapezoidal other side (up/down) Tilts: the image (left/right) Tilt Adjusts: Horizontal convergence (left/right) Convergence Vertical convergence (up/
ページ12に含まれる内容の要旨
Function (arrow keys usd) OSD Color Adjusts: Color temperature Temperature can be set from 6,500 K to 10,000 K, in 500 K increments. · Each monitor is slightly different, if two monitors are set to the same color temperature value (i.e. 6,500K), they may not necessarily look the same. PowerManager · VESA DPMS · Off Timer (Refer to the text below) Reset Default settings are as follows. · Contrast/Brightness:100%/50% · Moiré: 0% · Color: 9,300K · PowerManager: VESA DPMS = On Off Timer = Disable Po
ページ13に含まれる内容の要旨
Set-up Procedure 1)First, make the appropriate settings for the PC. E 2)Select VESA DPMS icon in the ScreenManager’s PowerManager menu. 3)Select “On”. Power saving method of VESA DPMS and the monitor VESA DPMS utilizes four signals: ON, STAND-BY, SUSPEND, and OFF. The monitor detects these signals from the graphics board and executes power-saving accordingly, as shown in the table below. Signal Screen LED Power consumption ON Operation Green 110 W (normal) STAND-BY Blank Green 80% of normal S
ページ14に含まれる内容の要旨
What is ENERGY STAR? “ENERGY STAR” is a set of power saving guidelines issued by the U.S. Environmental Protection Agency (EPA). The guidelines apply to PC systems and peripherals. Shortcut Keys Before entering the ScreenManager, brightness and contrast can be adjusted directly by moving the Control pad. To record the new setting and exit the ScreenManager, press the Enter key. (The brightness and contrast functions are also available in the ScreenManager “contrast/brightness” menu.) Brightne
ページ15に含まれる内容の要旨
3 TROUBLESHOOTING Troubleshooting If a problem persists even after applying the suggested remedies, contact an E EIZO dealer. Problems Points to check with possible solutions 1) Indicator status: OFF Check that the power cord is correctly connected. 2) Indicator status: GREEN Try pressing a key on the keyboard, or clicking the mouse. (The monitor may be in a power saving mode.) Check brightness and contrast settings. Minimum settings will cause screen to be blank. Try pressing a key on the key
ページ16に含まれる内容の要旨
Problems Points to check with possible solutions The monitor may be located close to a device that is generating a magnetic field. Such devices include speakers (other than the EIZO optional i·Sound speaker), electric motors, high-voltage cables, and other monitors. It may be solved by switching off or moving the interfering device, or by relocating the monitor. If the volume level of the EIZO optional i·Sound speaker is too high, it may, in some cases, cause a slight vibration. To eliminate
ページ17に含まれる内容の要旨
Problems Points to check with possible solutions 10)• The entire screen appears The CRT is not warmed up. Allow 30 minutes for the bluish or reddish. monitor to stabilize. E • Color purity is not uniform. • Misconvergence of colors. (red, green, blue) Explanation of the Characteristics of CRTs When the monitor is not fully warmed up, the screen may look slightly colored, e.g. reddish or bluish. This phenomenon is due to the unstableness of the electron gun during its warm-up period. Please wai
ページ18に含まれる内容の要旨
Problems Points to check with possible solutions 13)Two horizontal hairlines are These are dampening wires. Dampening wires are used visible on the screen. to support the CRT’s aperture grille, and are visible as thin dark lines across the screen. All EIZO aperture- grille type CRTs include two such horizontal wires. The aperture grille itself is a grid of taut metal filaments that spans the entire screen from top to bottom. 14)Faint black vertical lines are The aperture grille may be misalign
ページ19に含まれる内容の要旨
4 CLEANING WARNING • Keep liquids away from the monitor. E Spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the monitor immediately. Have the unit checked by a qualified service engineer before using it again. Using the monitor in this condition could cause serious injury or equipment damage. CAUTION • To ensure safety, always unplug the monitor before cleaning it. Failure to do so may result in elect
ページ20に含まれる内容の要旨
5 SPECIFICATIONS Electrical Specifications CRT 45 cm (17 inch) class, 90° deflection Aperture Grille type ® CRT with Anti-Reflective SuperErgoCoat CRT AG Pitch 0.25 mm Scan Frequency Horizontal: 30 kHz-82 kHz (Automatic) Vertical: 50 Hz-160 Hz (Automatic) Max. Active Display Area 323 mm (H) × 242 mm (V) (12.7” (H) × 9.5” (V)) (Viewable image size: 403 mm (15.8”)) * Display size can be set by the user through microprocessor control panel. * The actual size displayed can be dependent on the graph
