ページ1に含まれる内容の要旨
User’s Manual
Monochrome LCD Monitor
It shall be assured that the final system is in compliance to
IEC60601-1-1 requirements.
ページ2に含まれる内容の要旨
For U.S.A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: RadiForce GX320/GS320 is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference rec
ページ3に含まれる内容の要旨
English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. • Power supplied equipment can emit electr
ページ4に含まれる内容の要旨
English TABLE OF CONTENTS PRECAUTIONS .....................................................................................4 1. INTRODUCTION .....................................................................................9 1-1. Features ........................................................................................................9 1-2. Package Contents..........................................................................................9 1-3. Controls & Connectors .....
ページ5に含まれる内容の要旨
English PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] [Symbols on the unit] Symbol Location This
ページ6に含まれる内容の要旨
English WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. Opening the cabinet or modifying the unit may result in fire, electric shock, or burn. Refer all servicing to qualified service personnel. Do
ページ7に含まれる内容の要旨
English WARNING To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. Use the correct voltage. * The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage. Power s
ページ8に含まれる内容の要旨
English WARNING Do not touch a damaged LCD panel directly with bare hands. The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor. Follow local regulation or laws for safe disposal. The backlight of the LCD panel contains mercury. CAUTION Handle with care when carrying the
ページ9に含まれる内容の要旨
English LCD Panel The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints left on the screen if the p
ページ10に含まれる内容の要旨
English 1. INTRODUCTION Thank you for choosing an EIZO Monochrome Monitor. 1-1. Features • DVI (p. 36) Digital input compliant for TMDS (p. 36) • [Horizontal scanning frequency] 31 - 100 kHz [Vertical scanning frequency] 43 ~ 71.5 Hz (VGA text: 69 - 71 Hz) [Frame synchronous mode] 59 - 61 Hz supported [Resolution] 3M pixels (Portrait: 1536 × 2048 dots (H × V)) • CAL Switch function for selecting an optimal calibration mode (p. 22) • Selectable screen compliant with DICOM Par
ページ11に含まれる内容の要旨
English 1-3. Controls & Connectors Front ® ScreenManager main menu CAL Switch menu Control Panel (1) MODE Mode Switch (2) Enter Switch *1 (3) Directing Switches (Left, Down, Up, Right) (4) Power Switch *2 (5) Power Indicator Green Operational Orange Power saving Flashing orange slowly Power off (Main power is on) Off Main Power off *1 When the monitor is oriented in the landscape position, these switches can be changed to Up, Left, Right, and Down (p. 15). *2 To
ページ12に含まれる内容の要旨
English Side / Rear (6) DVI-D connector (7) USB upstream port (x 1) (8) USB downstream ports (x 2) (9) Power connector *3 (10) Security lock slot (11) Main Power Switch *4 (12) Monitor stand with adjustable height (detachable) *3 Allows for connection of a security cable. This lock supports Kensington’s MicroSaver security system. For further information, please consult: Kensington Technology Group 2855 Campus Drive, San Mateo, CA 94403 USA Tel.: 800-65
ページ13に含まれる内容の要旨
English 2. INSTALLATION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings resolution (p. 36) and frequency in accordance with the charts below. NOTE • When your computer and monitor support VESA DDC, the appropriate resolution and the refresh rate are set just by plugging your display into the computer without any manual settings. Resolution Frequency Dot Packed Pixel Standard Clock Portrait Landscape Portrait Landscape VGA TEXT 7
ページ14に含まれる内容の要旨
English 2. Connect the signal cable to the DVI-D input connector on the rear of the monitor and to the video output connector on the PC. After connecting, secure the cable connectors with the attached screw-in fasteners. Signal cable FD-C39 Power cord Signal Cable Connector on PC PC Signal cable (FD-C39) Video Output Connector / Exclusive graphics board DVI-D (p. 34) 3. Connect the power cord to the power connector on the rear of the monitor. 4. Thread the power cord and signal
ページ15に含まれる内容の要旨
English 5. Connect the other end of the power cord to a power outlet. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. 6. Turn on the monitor's power by touching the power switch. The monitor’s power indi
ページ16に含まれる内容の要旨
English 2-3. Environmental Settings The monitor may need to be set in some environment. If you install it for the first time or change environment, set the monitor. • Set the signal corresponding to make a connection for non monochrome signal only specifications. • Set the monitor orientation If the monitor is in portrait position and make a connection for monochrome signal only specifications, no setting is required. NOTE • Refer to the manual of the graphics board. • These enviro
ページ17に含まれる内容の要旨
English Monitor Orientation Display Example Landscape A Select this option when using the Landscape orientation. Portrait (SW) Select this option when using the Portrait orientation. Graphics board utility software is used to rotate the display image 90 degrees. Portrait (HW) Select this option when using the Portrait orientation. The monitor function is used to rotate the display image 90 degrees. 5. Restart the computer if the settings have been changed. 16 2. INSTAL
ページ18に含まれる内容の要旨
English 3. ADJUSTMET & SETTINGS 3-1. How to use the ScreenManager Screen adjustments and settings can be performed with the ScreenManager (OSD) and switches of the monitor. Mode Switch Power Switch ScreenManager Menu Directing Switches CAL Switch menu Left, Down, Up, Right Enter Switch Adjustment Startup Description ScreenManager menu Enter Switch 3-2. ScreenManager menu (p.18) CAL Switch menu Mode Switch 3-3. CAL Switch Function (p.22) Switches *Adjustment Lock Enter Swit
ページ19に含まれる内容の要旨
English 3-2. ScreenManager menu Using ScreenManager menu controls the screen adjustment and settings. Refer to the “Explanation” column in the following table for each detailed functions. Functions The following table shows all the ScreenManager’s adjustment and setting menus. Main menu Sub menu Explanation Setup Mode Preset Mode Preset Function - (p. 20) Mode Brightness See 4-1. Brightness Adjustment (p. 24) Reset PowerManager DVI DMPM Power Saving Function
ページ20に含まれる内容の要旨
English How to use the ScreenManager ScreenManager menu [Entering the ScreenManager] Touch the enter switch. [Making adjustments and settings] (1) Select the desired submenu icon with the directing switches and touch the enter switch. (2) Select the desired setting icon with the directing switches and touch the enter switch. (3) Make any required adjustments with the directing switches and touch the enter switch. [Exiting the ScreenManager] (1) To return to the main menu, select th
