ページ1に含まれる内容の要旨
ENGLISH
ページ2に含まれる内容の要旨
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2001 by EIZO NANAO CORPORATION. All rights reserved. No par
ページ3に含まれる内容の要旨
ENGLISH CONTENTS PRECAUTIONS ............................................................................. 4 1. INTRODUCTION ............................................................................ 8 1-1. Features ....................................................................................................... 8 1-2. Package Contents........................................................................................ 8 1-3. Controls & Connectors .....................................
ページ4に含まれる内容の要旨
PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. To ensure personal safety and proper maintenance. Please read this section and the caution statements on the monitor (refer to the figure below). [Location of the Caution Statements] The equipment must be connected to a grounded main outlet
ページ5に含まれる内容の要旨
ENGLISH WARNING Place the unit on a strong, stable surface. A unit placed on an inadequate surface may fall, resulting in injury or equipment damage. If the unit falls, disconnect the power immediately and have the unit checked by a qualified service engineer before using it again. OK Using a unit after it has been dropped may result in fire or electric shock. Set the unit in an appropriate location. Not doing so may cause damage and could result in fire or electric shock. * Do not place i
ページ6に含まれる内容の要旨
WARNING Use the correct voltage. * The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or other damage. * Do not overload your power circuit, as this may result in fire or electric shock. * For proper connections of the power cord, be certain to plug the power cord to the provided unit connector and directly to a wall outlet. Not doing so may result in fire or electric shock. Handle th
ページ7に含まれる内容の要旨
ENGLISH CAUTION Handle with care when carrying the unit. Disconnect the power cord and signal cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury or equipment damage. Do not move it alone. Always work with another person. Moving it alone may cause lower back pain. Also note that the unit is heavier at the front than at the rear. OK Do not block the ventilation slots on the cabinet. * Do not place books or any o
ページ8に含まれる内容の要旨
1. INTRODUCTION Thank you very much for choosing an EIZO Color Display Monitor. 1-1. Features • Fully flat screen CRT Horizontal scanning frequency of 30-130 kHz Vertical scanning frequency of 50-160 Hz Support to sRGB standard The color restoration circuit that can keep stable brightness and color-tone for a long period supported Fine contrast modes, to adjust the most suitable brightness and contrast of the screen (See page 17) Power saving system and off timer system (See page 18)
ページ9に含まれる内容の要旨
ENGLISH 1-3. Controls & Connectors Front (1) ScreenManager™ 1 (2) USB Port* with a drop down access lid Downstream port x 1 (3) BNC/D-SUB Selection Button (4) AUTO/FINE MODE Button (4) (5) (6)(7) (3) Push the button lightly: Fine Contrast Mode Selection button Push the button for more than 2 seconds: AUTO-SIZING button (5) QuickSet™ Control Pad (Hereinafter “Control Pad”) (2) (6) Power Indicator Indicated color Power-on status Green Power is on (Normal mode) Flashing Green Power save mode 1 Adva
ページ10に含まれる内容の要旨
2. INSTALLATION 2-1. Connecting the monitor to the PC • Be sure that the power switches of both of the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. • Standard graphics board Video Output Connector D-Sub mini 15 pin Standard graphics board Signal Cable (Enclosed) Macintosh Video Output Connector D-Sub min
ページ11に含まれる内容の要旨
ENGLISH 2. Plug the power cord into the power connector at the rear of the monitor. Then, plug the other end of the cord into a power outlet. WARNING WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may cause in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock. 3. Turn on the monitor fir
ページ12に含まれる内容の要旨
2-2. Getting Ready for Operation Try each setting procedure if necessary in the following cases. 1. The display image size and/or position is incorrect Press the AUTO/FINE MODE button on the front panel for more than 2 seconds. The AUTO-SIZING function centers the displayed image, aligning the image’s borders with respect to the monitor frame. In general, press the AUTO/FINE p.31) MODE button whenever changing the graphics card or the resolution , or when image size and/or position is incorr
ページ13に含まれる内容の要旨
ENGLISH 3. SCREEN ADJUSTMENT • Allow the monitor to stabilize for at least 30 minutes before making image adjustments. Up 3-1. How to use the ScreenManager Enter Use the control pad on the front panel. The control pad can Left Right be pressed in 5 directions, “Enter”, “Up”, “Down”, “Left” and “Right”. Down 1. Entering the ScreenManager Display the ScreenManager “Main menu” by pressing the “Enter” of the control pad. Main menu displays the current connector type and frequency of the input sign
ページ14に含まれる内容の要旨
Adjustments and Settings Main menu Sub menu Adjustments and Settings See page Contrast — Screen contrast and brightness — Size — Screen size — Position — Screen position — Screen Side Pin Side pin balance — Trapezoidal Distortion — Tilt Inclination — p.31) Uniformity Uniformity p. 24 p.30) Convergence Convergence p. 24 p.30) Moiré Reduction Moiré p. 23 Fine Contrast To select Movie Mode Settings (1~4) p. 17 Signal Filter 1 To decrease the slightly shadowed images or characters p.
ページ15に含まれる内容の要旨
ENGLISH 3-2. Color By using the in the menu, the adjustment mode can be selected from standard mode (to set the color temperature, the color correction and the color restration), custom mode (to adjust each color tone, (Red, Green and Blue)) and sRGB mode. These modes allow you to adjust the color settings according to your preference. mode to set the color temperature, the color correction and the color restration (1) To set the color temperature Set the
ページ16に含まれる内容の要旨
(3) To restore the changed brightness and the color caused by long use to close to those original ones. Execute the . The changed brightness and the color caused by long use can be corrected and restored to close to those factory default settings. Execute this function in every fixed time (ex. 2000 hours usage), so that you can keep stable brightness and color-tone for a long period. (1) Execute the . All other adjustments are off during the correction.
ページ17に含まれる内容の要旨
ENGLISH 3-3. Fine Contrast The fine contrast modes differ in brightness and contrast settings. Select the mode that is the best suited to the application in use. The mode can be changed with the AUTO/FINE MODE button that is on the front of the monitor. To select the most suitable brightness mode Push AUTO/FINE MODE button lightly. Select from the following modes to adjust the most suitable brightness of the screen. Pushing this button displays the fine contrast modes in the following orde
ページ18に含まれる内容の要旨
3-4. Power Save There are two power save settings. Choose the setting which matches your environment. Set the power saving setting by using menu. Do your part to conserve energy, turn off the monitor when you are finished using it. Complete energy use can only be accomplished by disconnecting the monitor’s power supply cord from the plug receptacle. p.31) To use the PC’s power saving system (VESA DPMS ) Select “ON” in the menu. [Procedure] (1) Set the PC’s power sa
ページ19に含まれる内容の要旨
ENGLISH 3-5. Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function Adjustments and settings in the ScreenManager. AUTO/FINE MODE button. Unlocked function Adjustment of contrast and brightness by the shortcut keys. BNC/D-Sub Selection button. [To lock] Press on the AUTO/FINE MODE button while switching on the monitor’s power. [To unlock] Switch off the monitor’s power, then hold down the AUTO/FINE MODE button once again and turn the power b
ページ20に含まれる内容の要旨
4. MAKING USE OF USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. As an added advantage, the monitor can be controlled from a PC with a mouse or keyboard when utilizing the enclosed utility software “ScreenManager Pro for USB”. Required system environment PC equipped with USB ports or another USB hub
