ページ1に含まれる内容の要旨
Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Manual
(separate volume) carefully to familiarize yourself with safe and
effective usage.
• Please refer to the Setup Manual for basic information ranging from
connection of the monitor to a PC to using the monitor.
• The latest User’s Manual is available for download from our web site:
http://www.eizo.com
ページ2に含まれる内容の要旨
This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION. EIZO NANAO CORPORATION is under no obligation to hold any submitted material or in
ページ3に含まれる内容の要旨
Notice for this Monitor Notice for this monitor Aside from general purposes like creating documents, viewing multimedia content, this product is also suited to applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not
ページ4に含まれる内容の要旨
Notice for this Monitor Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. If necessary, the stains on the cabinet and panel surface can be removed by using the provided ScreenCleaner. To use the monitor comfortably • An excessively dark or bright screen may
ページ5に含まれる内容の要旨
Table of Contents Table of Contents 3. Setting Monitor ................................................ 23 Cover ............................................................. 1 3-1. Setting Power Saving ...................................... 23 Notice for this monitor .......................................... 3 Analog Input ........................................................ 23 Cleaning ................................................................. 4 Digital Input ....................
ページ6に含まれる内容の要旨
1. Introduction 1. Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • 22.5” wide format LCD • Wide color gamut of 97% of Adobe RGB • Applicable to HDCP • WUXGA(1920 × 1200)display compliant • Supports SDI signal inputs (BNC: HD/SD-SDI x 2, or Dual Link SDI x 1) Resolution : 2048 dots x 1080 lines • Supports SDI signal outputs (BNC x 2, Loop-through) • Supports DVI / D-SUB signal inputs (DVI-D×1, D-SUB×1) [Horizontal scanning frequency] Analog : 26 - 92kHz
ページ7に含まれる内容の要旨
1. Introduction 1-2. Controls and Functions SC AN SIGNAL SC R E EN TYP E FORMAT SIZE IN F O DVI/ D-SUB SDI MODE ENTE R Adjustment menu ® (ScreenManager *) SCAN SIGNAL SCRE EN TYPE FORMAT SIZE INFO DVI/ SDI MODE ENTER D- SUB 1 2 3 4 5 6 7 1. DVI / D-SUB Input Signal Selection button 2. SDI Input Signal Selection button 3. Mode button 4. Enter button 5. Control buttons (Left, Down, Up, Right) 6. Power button 7. Power indicator Indicator status Operation status Blue The screen is displayed
ページ8に含まれる内容の要旨
1. Introduction 1-3. Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. Disk contents and software overview The disk includes software programs for adjustment and User’s Manual. Refer to “Readme.txt” or the “read me” file on the disk for software startup procedures or file access procedures. Item Overview For Windows For Macintosh A “Readme.txt” or “read me” file √ √ ColorNavigato
ページ9に含まれる内容の要旨
1. Introduction 1-4. Basic Operation and Functions Basic Operation Adjustment menu allows you to adjust screen performance though the main menu and select a Color mode easily. Adjustment menu ® (ScreenManager ) Enter button Power button SCAN SIGNAL SCRE EN TYPE FORMAT SIZE INFO DVI/ SDI MODE ENTER D- SUB S C AN S IGN AL S C REEN T Y PE FORMAT S IZ E IN FO DV I / S D I MO DE E N TE R D- S UB Color Mode Menu Control buttons Mode button (Left, Down, Up, Right) Note • The Adjustment menu and the
ページ10に含まれる内容の要旨
1. Introduction Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main menu Sub menu SDI DVI D-SUB Reference Setup Black Insertion "2-6. Setting Black Insertion" (page √ √ √ 22) Pseudo Interlace √ - - "2-2. Setting SDI Input Signal" (page Range Extension √ - - 12) SDI Settings √ - - Reset √ √ √ Screen Auto Adjustment - - √ "2-3. Displaying Screen Correctly Clock - - √ (Analog Input Only)" (page 14) Phase - - √ Position - - √ Resolution - - √ Range Ad
ページ11に含まれる内容の要旨
2. Adjusting Screen 2. Adjusting Screen 2-1. Setting Screen Resolution Compatible Resolutions/Frequencies For details on compatible resolutions, refer to “Compatible Resolutions/Frequencies” in the Setup Manual. Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. When using video editing equipment, refer to the instruction manual for the equipment. Windows Vista 1. Right-clic
ページ12に含まれる内容の要旨
2. Adjusting Screen 2-2. Setting SDI Input Signal Note • These settings can only be made when using the SDI input signal. The following settings are located on the menu of the Adjustment menu. Setting Pseudo Interlace This display method shows the interlaced signals as they are and gives the video a CRT-like display effect. Tips • can be set under these conditions: - The input signal is 1080i and the scan type on the menu is set to “Interlace”. - The i
ページ13に含まれる内容の要旨
2. Adjusting Screen The following settings are located on the menu of the Adjustment menu. Adjusting Sharpness Emphasizes the outline of the image by emphasizing the color difference between the pixels composing the image and to improve a sense of quality and materiality. Note • may not be adjustable for certain settings. (Refer to "4. Troubleshooting"). [Procedure] 1. From the menu on the Adjustment menu, select . 2. Adjust the setting with (0 to 10).
ページ14に含まれる内容の要旨
2. Adjusting Screen 2-3. Displaying Screen Correctly (Analog Input Only) Note • Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. The monitor displays the digital input image correctly based on its pre-setting data. The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and screen size correctly according to the PC to be used. To use the monitor comfortably, adjust the screen when the monitor is set up for
ページ15に含まれる内容の要旨
2. Adjusting Screen 3 Perform the auto size adjustment again with the analog screen adjustment pattern displayed. 1. Display Pattern 1 in full screen on the monitor using the “Screen Adjustment Utility” or the screen adjustment pattern files. 2. From the menu on the Adjustment menu, select . 3. Select “Execute” The Auto Adjustment function begins (showing a running status icon) to adjust flickering, screen position, and screen size automatically. 4 Adjust by using <
ページ16に含まれる内容の要旨
2. Adjusting Screen (3) The screen position is incorrect. Use the adjustment. The correct displayed position of the monitor is decided because the number and the position of the pixels are fixed. The adjustment moves the image to the correct position. Select and use to adjust the position so that the entire image is displayed. If vertical bars of distortion appear after finishing the adjustment, return to adjustment and repeat the previo
ページ17に含まれる内容の要旨
2. Adjusting Screen 2-4. Adjusting Color Simple Adjustment (Switching Color Mode) Changing the color mode enables you to set the monitor to the appropriate display mode. Selecting Color Mode Pressing displays the Color Mode menu at the bottom left of the screen. Each press of changes through 7 modes. Press to exit the menu. ->Custom->sRGB->EBU->Rec709->SMPTE-C->DCI->CAL Tips • The Adjustment menu and the Color Mode menu cannot be displayed at the same time. Color Mode Menu [EX.]Custom Powe
ページ18に含まれる内容の要旨
2. Adjusting Screen Advanced Adjustments [Adjustment menu] Color settings of each Color mode can be adjusted and saved by using the menu of the Adjustment menu. In the analog input, perform the “Range Adjustment” before making the color adjustments. During color adjustments, the color mode cannot be changed. Select the mode in advance by using . Adjustment Items The adjustable items and displayed icons on the menu depend on the selected color mode. Regarding the adjustment ite
ページ19に含まれる内容の要旨
2. Adjusting Screen Adjustment Contents Menu Function Descriptions Adjustable range Black Level To adjust the black level as desired 0 - 32 Brightness To set the brightness of the screen 0~100% Tips • The values shown in the “%” are available only as reference. Temperature To set the color temperature 5000K~10000K in 500 K increments (including 5400K and 9300 K) Tips • The values shown in the Kelvin are available only as a reference tool. • While color temperature is adjusted, is adjust
ページ20に含まれる内容の要旨
2. Adjusting Screen 2-5. Changing Screen Size Ratio The screen size ratio can be selected using the function on the menu. Changing Screen Size Ratio for Input Screen -> Select the . Select the in the menu and select the screen size by using and . When using DVI/D-SUB input signal Mode Function Enlarged Displays the picture on the screen in full, irrespective of the picture’s resolution. Since the vertical resolution and horizontal re
