ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
For U.S.A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan L761T-C is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference receiv
ページ3に含まれる内容の要旨
User’s Manual Touch Panel Color LCD Monitor It shall be assured that the final system is in compliance to IEC60601-1-1 requirements.
ページ4に含まれる内容の要旨
English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. • Product specifications may vary depending
ページ5に含まれる内容の要旨
English TABLE OF CONTENTS PRECAUTIONS ...................................................................................4 1. INTRODUCTION .....................................................................................9 1-1. Features ........................................................................................................9 1-2. Package Contents..........................................................................................9 1-3. Controls & Connectors .......
ページ6に含まれる内容の要旨
English PRECAUTIONS IMPORTANT • This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. • To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor. [Location of Caution Statement] [Symbol on the Unit] Symbol Location This symbol indicates Front Power button Control pan
ページ7に含まれる内容の要旨
English WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. Opening the cabinet or modifying the unit may result in fire, electric shock, or burn. Refer all servicing to qualified service personnel. Do n
ページ8に含まれる内容の要旨
English WARNING To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. Power Supply: 100-120/200-240 Vac 50/60Hz To disconnect the power cord, grasp the plug firmly and pull. OK Tugging on the cord may damage and result in fire or electric s
ページ9に含まれる内容の要旨
English WARNING Do not touch a damaged LCD panel directly with bare hands. The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor. Lamps contain mercury, dispose according to local, state or federal laws. CAUTION Handle with care when carrying the unit. Disconnect the pow
ページ10に含まれる内容の要旨
English Notice for this monitor This product is suited to creating documents, viewing multimedia content, and other general purposes. In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on the LCD panel, this is not malfunction. Percentage of effective pixels: 99.9994% or higher.
ページ11に含まれる内容の要旨
English 1. INTRODUCTION Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • Dual inputs compliant • DVI (p.34) Digital input (TMDS (p.35)) compliant. • Horizontal scanning frequency: Analog input 30 - 81 kHz Digital input 30 - 65 kHz Vertical scanning frequency: Analog input 49.5 - 75.5 Hz Digital input 59 - 61 Hz (VGA text: 70 Hz) Resolution: 1 M pixels (1280 dots x 1024 lines) • Auto Adjustment compliant • Support to sRGB (p.35) standard
ページ12に含まれる内容の要旨
English 1-3. Controls & Connectors Front (1) Control Panel SIGNAL MODE AUTO ENTER 1 - 2 (2) (3) (4) (5) (6) (7) (8) ® (1)ScreenManager Monitor Adjustment menu (p.16) Input Signal Switch the input signals when connecting 2 (2)SIGNAL1-2 Selection Button PCs. (p.15) (3)MODE Mode Button Show or switch the color mode. (p.23) (4)AUTO Auto Adjustment Adjust the screen to appropriate condition Button automatically. (analog input only) Enter Button Show the ScreenManager on the screen.
ページ13に含まれる内容の要旨
English Rear (13) (15) (14) Bottom (9) (10) (11)(12) (9) Power Connector Connect the power cord. (10) DVI-D Connector Connect the optional digital cable. (SIGNAL1) D-Sub mini 15 pin Connect the enclosed analog cable (MD- (11) Connector C87) (SIGNAL2) (12) USB port (Up) Connect the USB cable (MD-C93) (13) Hole for TP1 Hole for installing the lead of the TP1 (Optional Touch Panel Pointer). Security Lock Slot Allows for connection of a security cable. (14) This lock supp
ページ14に含まれる内容の要旨
English 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution (p.35) and frequency) in accordance with the charts below. NOTE • The lower display modes like 640x 480, automatically enlarge to the maximum display mode (1280 x 1024), and some lines of the characters may become fuzzy. In this case, use function (p.22) to make the lines clear. • When your computer and display support VESA DDC, the suit
ページ15に含まれる内容の要旨
English 2-2. Connecting the signal cable NOTE • Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Digital Signal Input Connecter Analog Signal Input Connecter 1. Signal Cable 5. USB Cable 2. Power Cord Analog Input Signal Cable Connector of PC PC Sig
ページ16に含まれる内容の要旨
English 2. Plug the power cord into the power connector on the rear of the monitor. Then, plug the other end of the cord into a power outlet. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. Power Supply: 100-120/200-240 Vac 50/60Hz The equipment must be connected to a grounded main outlet. Failure to do so may result in f
ページ17に含まれる内容の要旨
English 2-3. Touch Operation Point and touch with one finger only. NOTE • Do not touch the screen while turning on the PC and the monitor. Touch the screen five seconds later after appearing the image. • Touch the screen five seconds later after connecting the USB cable. • For the users with gloves, we recommend to use touch panel pointer, “TP1” (optional). Regarding the installation, please refer to the User’s Manual of TP1. 2-4. Connecting two PCs to the monitor Two PC
ページ18に含まれる内容の要旨
English 3. ScreenManager 3-1. How to use the ScreenManager ScreenManager Main Menu Control Buttons Left, Down, Up, Right SIGNAL MODE AUTO ENTER 1 - 2 Auto Adjustment Button Enter Button 1. Entering the ScreenManager Press the Enter Button once to display the main menu of the ScreenManager. 2. Making Adjustments and Settings (1) Select the desired sub menu icon using the Control Buttons and press the Enter Button. The sub menu appears. (2) Use the Control Buttons to select the
ページ19に含まれる内容の要旨
English 3-2. Adjustments and Settings The following table shows all the ScreenManager’s adjustment and setting menus. “*” indicates adjustments of analog input only. Main menu Sub menu Reference Screen Clock * 4-1. Screen Adjustment (p.20) Phase * Position * Range Adjustment * Smoothing Color Brightness 4-2. Color Adjustment (p.23) Color Mode • Custom Temperature Gamma Saturation Hue Gain Reset • sRGB Others Input Signal Set the input signal selection of automatic or manual (
ページ20に含まれる内容の要旨
English 3-3. Useful Functions Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function • Auto Adjustment Button adjustments and settings in the ScreenManager. Unlocked function • Adjustment of brightness by the Control Buttons. • Input Signal Selection Button • Mode Button [To lock] (1) Switch off the monitor’s power by the power switch on the control panel. (2) Press on the Auto adjustment button while switching on the monitor’s power.
