ページ1に含まれる内容の要旨
User’s Guide
Dell E2014T
Regulatory model: E2014Tt
ページ2に含まれる内容の要旨
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2013-2014 Dell Inc. All rights reserved. Information in this document is subject to change without notice.Reproduction of these materials in any manner whatsoever without the written permission of Del
ページ3に含まれる内容の要旨
Contents About Your Monitor ............................. 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Plug-and-Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 LCD Monitor Quality and Pixel Policy. . . . . . . . .
ページ4に含まれる内容の要旨
Appendix ...................................... 45 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 FCC Notices (U.S. only) and Other Regulatory Information . . 45 Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Setting Display Resolution to 1600 x 900 (maximum) . . . . . . 46 Downloading Latest Video Drivers . . . . . . . . . . . . . . . . . 46 Setting up Dual Monitors . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
About Your Monitor Package Contents Your monitor ships with the components shown below. Make sure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. NOTE: To set up with any other stand, see the documentation for the stand. Monitor Stand Power cable (varies by country) HDMI cable About Your Monitor 5
ページ6に含まれる内容の要旨
USB cable (enables touch screen function on the monitor) Screen cleaning cloth Velcro strap • Quick Setup Guide • Drivers and Documentation Media • Product and Safety Information Guide 6 About Your Monitor
ページ7に含まれる内容の要旨
Features Your monitor features the following: • 49.41 cm (19.5 inch) diagonal display area. • Resolution of 1600 x 900. • Tilt adjustment (5.5 degrees up and 31 degrees down). • Removable stand. • 100 mm x 100 mm Video Electronics Standards Association (VESA) compliant mounting holes. • Plug-and-play support. • On-Screen Display (OSD) controls for easy setup and screen optimization. • Security cable slot. • Stand lock. • INF file, Image and color matching (ICM) file, Dell Display Mana
ページ8に含まれる内容の要旨
Parts and Controls Front View ew Side-panel controls Label Description 1 Function buttons (For more information, see Operating the Monitor) 2 Power On/Off button (with indicator light) Back View Label Description Use 100 mm x 100 mm Wall mount monitor using 1 VESA mounting holes 100 mm x 100 mm VESA-compatible (under VESA cover) wall-mount kit. 2 Regulatory label Lists the regulatory approvals. Stand release button Releases the stand from the monitor. 3 8 About Your Monitor
ページ9に含まれる内容の要旨
Barcode serial Refer to this label if you need to 4 number label contact Dell for technical support. Dell soundbar Attaches the Dell Soundbar (optional). 5 mounting slots Cable management Organize cables by placing them through the slot. 6 slot Side View Bottom View Label Description Use Use a M3 x 6 mm screw to lock the stand to the 1 Stand lock monitor. (screw not included) 2 AC power cord port Connect the power cable. Connect a DisplayPort cable from your computer to 3 DisplayPort port th
ページ10に含まれる内容の要旨
Connect speakers to playback audio coming through HDMI or DisplayPort audio channels. Only supports 2-channel audio. 7 Audio line-out port NOTE: The audio line-out port does not support headphones. Connect the USB cable from the monitor to the 8 USB upstream port computer to allow you to use the USB ports and touch screen function on the monitor. Connect your USB device. You must connect the USB 2.0 downstream 9 USB upstream cable to your monitor and computer ports before you can use thes
ページ11に含まれる内容の要旨
Response time 2 ms (with overdrive) Color depth 16.77 million colors 72% (CIE1976) Color gamut (typical) NOTE: Color gamut (typical) is based on CIE1976 (72%) and CIE1931 (72%) test standards. Touch Type Infrared Optical System Panel diagonal 19.5” Panel thickness 6.5 ± 0.3 mm Active area Extended beyond viewing area Cover glass thickness 3.0 +0.0/-0.3 mm Input method Bare finger, thin gloves, conductive stylus Touch point 5 touch-points Output position resolution 32767 x 32767 Touch method
ページ12に含まれる内容の要旨
Environmental Characteristics Temperature Operating 0 °C to 40 °C (32 °F to 104 °F) Non-operating -20 °C to 60 °C (-4 °F to 140 °F) Humidity Operating 10% to 80% (non-condensing) Non-operating 5% to 90% (non-condensing) Altitude Operating 5,000 m (16,400 ft) max Non-operating 12,191 m (40,000 ft) max 136.49 BTU/hour (maximum) Thermal dissipation 54.59 BTU/hour (typical) Preset Display Modes Vertical Sync Polarity Horizontal Pixel Clock Display Mode Frequency (Horizontal/ Frequency (kHz) (MHz)
ページ13に含まれる内容の要旨
One USB 2.0 upstream port USB Two USB 2.0 downstream ports Audio One audio-out port • D - Sub • HDMI Signal cable type • MHL • DisplayPort • USB 2. 0 Dimensions (with stand) Height 376.0 mm (14.80 inches) Width 505.9 mm (19.92 inches) Depth 165.0 mm (6.50 inches) Dimensions (without stand) Height 311.2 mm (12.25 inches) Width 505.9 mm (19.92 inches) Depth 51.7 mm (2.04 inches) Stand dimensions Height 289.8 mm (11.41 inches) Width 180.0 mm (7.09 inches) Depth 165.0 mm (6.50 inches) Weight
ページ14に含まれる内容の要旨
VESA Horizontal Vertical Video Power Indicator Power Consumption Modes Sync Sync Normal Active Active Active White 16 W (typical) operation 40 W (maximum) Active-off Inactive Inactive Blank Brething white Less than 0.5 W mode Switch off - - - Off Less than 0.5 W ® NOTE: This monitor is ENERGY STAR -compliant. NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the power cable from the monitor. The OSD functions only in the normal operation mode. If you press any b
ページ15に含まれる内容の要旨
Pin Assignments VGA Pin 15-pin Side of the Pin 15-pin Side of the Number Connected Signal Cable Number Connected Signal Cable 1 Video-Red 9 Computer 5 V/3.3 V 2 Video-Green 10 GND-sync 3 Video-Blue 11 GND 4 GND 12 DDC data 5 Self-test 13 H-sync 6 GND-R 14 V-sync 7 GND-G 15 DDC clock 8 GND-B HDMI Pin 19-pin Side of the monitor Pin 19-pin Side of the monitor Number connector Number connector 1 TMDS Data 2+ 11 TMDS Clock Shield 2 TMDS Data 2 Shield 12 TMDS Clock- 3 TMDS Data 2- 13 Floating 4 TM
ページ16に含まれる内容の要旨
DisplayPort 20-pin Side of the monitor 20-pin Side of the monitor Pin Number Pin Number connector connector 1 ML0 (p) 11 GND 2 GND 12 ML3 (n) 3 ML0 (n) 13 GND 4 ML1 (p) 14 GND 5 GND 15 AUX (p) 6 ML1 (n) 16 GND 7 ML2 (p) 17 AUX (n) 8 GND 18 HPD 9 ML2 (n) 19 DP_PWR Return 10 ML3 (p) 20 +3.3 V DP_PWR Universal Serial Bus (USB) This section gives you information about the USB ports available on your monitor. Your computer has the following USB ports: • 1 upstream • 2 downstream NOTE: The USB
ページ17に含まれる内容の要旨
Pin Signal Pin Signal Number name Number name 1 DMU 1 VCC 2 VCC 2 DMD 3 DPU 3 DPD 4 GND 4 GND NOTE: USB 2.0 functionality requires a USB 2.0-capable computer. NOTE: The monitor’s USB ports work only when the monitor is on or in the power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds to resume normal functionality. Plug-and-Play You can install the monitor in any Plug-and-Play-compatible computer. The monitor automatically provides
ページ18に含まれる内容の要旨
CAUTION: Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air. • Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor. • If you notice white powder when you unpack your monitor , wipe it o ff with a so ft and clean cloth. • Handle your monitor with car e to a void scra tches and scuff mark s. • T o help maintain the best image quality on your monitor , use a dynamically ch
ページ19に含まれる内容の要旨
Connecting Your Monitor WARNING: Follow the Safety Instructions before you perform any of the procedures in this section, To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable from the wall outlet. 2. Connect the USB cable and only one of the following display cables to your computer: VGA cable, DisplayPort cable, or HDMI cable NOTE: Do not connect multiple display cables to the same computer. Connecting the VGA C
ページ20に含まれる内容の要旨
Connecting the USB Cable NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Organizing Cables After you connect all necessary cables to your monitor and computer, use the cable-management slot to organize the cables. Removing the Stand NOTE: To avoid scratching on the LCD screen while removing the stand, make sure that the monitor is placed on a clean surface. NOTE: If you purchased a different stand for your monitor, see the documentation
