ページ1に含まれる内容の要旨
Dell™ P2411H Flat Panel Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your monitor.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury or death.
Information i
ページ2に含まれる内容の要旨
Back to Contents Page About Your Monitor Dell™ P2411H Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability Universal Serial Bus (USB) Interface LCD Monitor Quality and Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional
ページ3に含まれる内容の要旨
l DVI Cable l USB up stream cable (enables the USB ports on the monitor) l Drivers and Documentation media l Quick Setup Guide l Product and Safety Information Guide Product Features The Dell™ Professional P2411H flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: ■ P2411H: 609.7 mm (24-inch) viewable area display (Measured diagonally). 1920 x 1080 resolution, plus full-screen sup
ページ4に含まれる内容の要旨
Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power button (with power light indicator) Back View Back view Back view with monitor stand Label Description Use VESA mounting holes (100 mm x 100 mm - 1 Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm) behind attached VESA Plate) 2 Regulatory label Lists the regulatory approvals. 3 Stand release button
ページ5に含まれる内容の要旨
8 Cable management slot Use to organize cables by placing them through the slot. Side View Left view Right view Bottom View Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cable 2 DC power connector for Dell Soundbar. Connect the power cord for the soundbar (optional) 3 DVI connector Connect your computer DVI cable 4 VGA connector Connect your computer VGA cable Connect the USB cable that came with your monitor to
ページ6に含まれる内容の要旨
Screen dimensions 609.7 mm (24 inches viewable image size) Preset display area: 531.36 (H) X 298.89 (V) mm Horizontal 531.36 mm (20.92 inches) Vertical 298.89 mm (11.77 inches) Pixel pitch 0.277 mm Viewing angle 160° (vertical) typ, 170° (horizontal) typ Luminance output 250 cd/m ²(typ) Contrast ratio 1000 to 1 (typ) Dynamic contrast ratio Up to 2,000,000 : 1 (typ) Faceplate coating Antiglare with hard-coating 3H Backlight LED edgelight system Response Time 5 ms typical Color depth 16.7 million
ページ7に含まれる内容の要旨
Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hz to 75 Hz (automatic) Maximum resolution 1920 x 1080 at 60 Hz Video Supported Modes Model P2411H Video display capabilities (DVI playback) 480p, 480i, 576p, 576i, 720p, 1080p and 1080i Preset Display Modes P2411H Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Display Mode (kHz) (Hz) (MHz) (Horizontal/Vertical) 720 x 400 31.5 70.0 28.3 -/+ 640 x 480 31.5 60.0 25.2 -/- 640 x 480 37.5 75.0 31.5
ページ8に含まれる内容の要旨
Electrical Specifications Model P2411H Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance Video input signals Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG Synchronization input signals (Composite SYNC on green) AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.5 A (Max.) 120V:30A (Max.) Inrush current 240V:60A (Max.)
ページ9に含まれる内容の要旨
Weight with stand assembly and cables 5.8 kg (12.79 lbs) Weight without stand assembly (For wall mount or VESA mount considerations - no cables) 3.7 kg (8.16 lbs) Weight of stand assembly 1.92 kg (4.23 lbs) Environmental Characteristics Model P2411H Temperature Operating 0° to 40 ° C Storage: -20° to 60°C (-4° to 140°F) Non-operating Shipping: -20° to 60°C (-4° to 140°F) Humidity Operating 10% to 80% (non-condensing)
ページ10に含まれる内容の要旨
Storage: 5% to 90% (non-condensing) Non-operating Shipping: 5% to 90% (non-condensing) Altitude Operating 4,850 m (15,902 ft) max Non-operating 12,192 m (40,000 ft) max 170.72 BTU/hour (maximum) Thermal dissipation 92.19 BTU/hour (typical) Power Management Modes If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode*. If the computer detects input
ページ11に含まれる内容の要旨
Back to Contents Page Appendix Dell™ P2411H Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC Notices (U.S. Only)
ページ12に含まれる内容の要旨
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps:- ® ® 1. Check Operating System Requirements Windows XP, Windows Vista , Windows 7 2. Install Entech API Install 3. Install PowerNap Software Install Back to Contents Page
ページ13に含まれる内容の要旨
Back to Contents Page Setting Up Your Monitor Dell™ P2411H Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920 X 1080 again. NOTE: If you are unable to set the resolution to 1920 x 1080, please contact Dell™ to inquire about a Graphics
ページ14に含まれる内容の要旨
Back to Contents Page Setting Up Your Monitor Dell™ P2411H Flat Panel Monitor If you have non Dell™ desktop, portable computer, or graphic card In Windows XP: 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR htt
ページ15に含まれる内容の要旨
Back to Contents Page Operating the Monitor Dell™ P2411H Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu PowerNap Software Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel, and Vertical Extension Rotating the monitor Adjusting the Rotation Display Settings of Your System Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the chara
ページ16に含まれる内容の要旨
5 Use the Power button to turn the monitor on and off. The Blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode. Power (with power light indicator) Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the
ページ17に含まれる内容の要旨
Use this menu to activate Brightness/Contrast adjustment. Brightness/Contrast Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the button to decrease brightness (min 0 ~ max 100). NOTE:Brightness control will be greyed out during "Screen dim" in PowerNap option when screen saver is activated. Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary. Press the button to in
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
ページ20に含まれる内容の要旨
