ページ1に含まれる内容の要旨
Dell™ IN1930/IN2030M Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Cautions, Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Information in this docume
ページ2に含まれる内容の要旨
Back to Contents Page About Your Monitor Dell™ IN1930/IN2030M Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability LCD Monitor Quality & Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell™ if anything is missing. NOTE: Some items may be optional and ma
ページ3に含まれる内容の要旨
l Drivers and Documentation media l Quick Setup Guide l Product Information Guide Product Features The Dell™ IN1930/IN2030M flat panel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display. The monitor's features include: ■ IN1930: 47.0 cm (18.5 inches) viewable area display. 1366 x 768 resolution, plus full-screen support for lower resolutions. ■ IN2030M: 50.8 cm (20.0 inches) viewable area display. 1600 x 900 resolution, plus full-screen support for lower r
ページ4に含まれる内容の要旨
Label Description Use 1 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 2 Regulatory rating label Lists the regulatory approvals. 3 VESA mounting holes (100 mm) To mount the monitor. 4 Security lock slot Use a security lock with the slot to help secure your monitor. 5 Dell soundbar mounting brackets To attach the optional Dell Soundbar. Side View Right Side Bottom View IN1930:
ページ5に含まれる内容の要旨
Label Description Use Label Description Use 1 AC power connector To connect the monitor power cable. 1 AC power connector To connect the monitor power cable. 2 DVI connector To connect your computer to the monitor using a DVI cable. 2 VGA connector To connect your computer to the monitor using a VGA cable. 3 VGA connector To connect your computer to the monitor using a VGA cable. Monitor Specifications The following sections give you information about the various p
ページ6に含まれる内容の要旨
15-pin D-Sub connector Pin Number Monitor Side of the 15-pin Side Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 DDC +5 V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock DVI Connector Pin 24-pin Side of the Connected Signal Number Cable 1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5 V power
ページ7に含まれる内容の要旨
22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- Plug and Play Capability You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required. Flat Panel Specifications Model number Dell IN193
ページ8に含まれる内容の要旨
120 V: 30 A (Max.) Inrush current 240 V: 60 A (Max.) Preset Display Modes The following table lists the preset modes for which Dell guarantees image size and centering: IN1930: Display Mode Horizontal Frequency Vertical Frequency Pixel Clock (MHz) Sync Polarity (kHz) (Hz) (Horizontal/Vertical) VESA, 720 x 400 31.5 70.0 28.3 -/+ VESA, 640 x 480 31.5 60.0 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.0 40.0 +/+ VESA, 800 x 600 46.9 75.0 4
ページ9に含まれる内容の要旨
l Height 141.50 mm (5.57 inches) 141.50 mm (5.57 inches) l Width 236.33 mm (9.30 inches) 236.33 mm (9.30 inches) l Depth 163.78 mm (6.45 inches) 163.78 mm (6.45 inches) Weight: Weight with packaging 3.94 kg (8.69 lb) 4.25 kg (9.37 lb) Weight with stand assembly and cables 3.26 kg (7.19 lb) 3.53 kg (7.78 lb) Weight without stand assembly (For wall mount or VESA mount 2.64 kg (5.82 lb) 2.91 kg (6.42 lb) considerations - no cables) Weight of stand assembly 0.33 kg (0.73 lb) 0.33
ページ10に含まれる内容の要旨
Back to Contents Page
ページ11に含まれる内容の要旨
Back to Contents Page Appendix Dell™ IN1930/IN2030M Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC Notices (U.S. Only)
ページ12に含まれる内容の要旨
Back to Contents Page Setting Up Your Monitor Dell™ IN1930/IN2030M monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your graphics adapter, attempt to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) again. NOTE: If you are unable to set the resolution to 1366 x 768 (for IN1930)
ページ13に含まれる内容の要旨
Back to Contents Page Setting Up Your Monitor Dell™ IN1930/IN2030M monitor If you have a non Dell™ desktop, portable computer, or graphics card In Windows XP: 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.co
ページ14に含まれる内容の要旨
Back to Contents Page Operating the Monitor Dell™ IN1930/IN2030M Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt Power On the Monitor Press the button to turn on the monitor. Using the Front Panel Controls Use the keys on the front of the monitor to adjust the image settings. Front panel Key Description A Use the Preset
ページ15に含まれる内容の要旨
Front panel Key Use the keys on the front of the monitor to adjust the image settings. Front panel Key Description A Use the Up key to adjust (increase ranges) items in the OSD menu. Up B Use the Down key to adjust (decrease ranges) items in the OSD menu. Down C Use the OK key to confirm your selection. OK D Use the Back key to go back to the previous menu. Back Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings an
ページ16に含まれる内容の要旨
2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the button again. 4. Press the and buttons to select the desired parameter. 5. Press the button to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes. 6. Select the to return to previous menu without accepting current settings
ページ17に含まれる内容の要旨
Brightness Allows you to adjust the brightness or luminance of the backlight. Press the key to increase brightness and press the key to decrease brightness (min 0 ~ max 100). Contrast Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness first, and adjust contrast only if you need further adjustment. Press the key to increase contrast and press the key to decrease contrast (min 0 ~ max 100).
ページ18に含まれる内容の要旨
Auto Adjust Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self current input: Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings. NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals
ページ19に含まれる内容の要旨
Input Source (for IN2030M Use the Input Source menu to select between different video signals that may be connected to your monitor. only) Auto Select Select Auto Select to scan for available input signals. VGA Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. DVI-D Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source. COLOR SETTINGS Use the Color Setting menu to adjust the monitor's color s
ページ20に含まれる内容の要旨
Input Color Format Allows you to set the video input mode to: l RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter l YPbPr: Select this option if your DVD player supports only YPbPr output. Preset Modes Allows you to choose from a list of preset color modes.
