ページ1に含まれる内容の要旨
Dell™ 1707FPV Flat Panel Monitor User's Guide
Dell™ 1707FPV Flat Panel Monitor User's Guide
About Your Monitor Rotating Your Monitor
Front View Changing the Rotation of Your Monitor
Back View Rotating Your Operating System
Side View
Bottom View
Solving Problems
Monitor Specifications
Troubleshooting Your Monitor
Cleaning Your Monitor
General Problems
Product Specific Problems
Using Your Adjustable Monitor Stand
USB Problems
Attaching the Stand Troubleshooting Your Soundbar
Organizing Your Cables
ページ2に含まれる内容の要旨
About Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide Back to Contents Page About Your Monitor Dell™ 1707FPV Flat Panel Monitor User's Guide Front View Back View Bottom View Side View Monitor Specifications Cleaning Your Monitor Front View 1. OSD menu / select button 2. Video input select / Down button 3. Auto-adjust / Up button 4. Power button (with power light indicator) Back View file:///T|/htdocs/monitors/1707FPV/en/about.htm[9/12/2012 5:23:29 PM]
ページ3に含まれる内容の要旨
About Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide 1 VESA mounting holes (100mm) (Behind Use to mount the monitor. attached base plate) 2 Regulatory rating label List the regulatory approvals. 3 Security lock slot Use a security lock with the slot to help secure your monitor. 4 Dell Soundbar mounting brackets Attach the optional Dell Soundbar. 5 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 6 Stand removal button Press to rele
ページ4に含まれる内容の要旨
About Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide USB connectors (downstream) Left side Right side Monitor Specifications Power Management Modes If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If input from keyboard, mouse, or other input devices is detected by the computer, the monitor automatically 'wakes up'. The following ta
ページ5に含まれる内容の要旨
About Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide Pin Number Monitor Side of the 15-pin Side Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 DDC-GND 6 GND-R 7 GND-G 8 GND-B 9 DDC +5V 10 Self Test 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock 24-pin Digital-only DVI Connector NOTE: Pin 1 is at the top right. Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment 1 T.M.D.S. Data 2- 9 T.M.D.S. Data 1- 17 T.M.D.S. Data 0- 2 T.M.D.S. Data 2+ 10 T.M.D.S. Da
ページ6に含まれる内容の要旨
About Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide USB ports: 1 upstream - rear 4 downstream - 2 on rear; 2 on left side NOTE: USB 2.0 capability requires 2.0-capable computer. NOTE: The USB interface of the monitor works ONLY when monitor is powered ON (or in Power Save Mode). Switching your monitor OFF and then ON would re- enumerate its USB interface; attached peripherals may take a few seconds to resume normal functionality. Plug and Play Capability You can install the monito
ページ7に含まれる内容の要旨
About Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108 +/+ VESA, 1280 x 1024 64.0 60.0 135.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ Electrical Video input signals Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance Synchronizatio
ページ8に含まれる内容の要旨
About Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide Environmental Temperature: Operating 5° to 35°C (41° to 95°F) Nonoperating Storage: -20° to 60°C (-4° to 140°F) Shipping: -20° to 60°C(-4° to 140°F) Humidity: Operating 10% to 80% (noncondensing) Nonoperating Storage: 5% to 90% (noncondensing) Shipping: 5% to 90%(noncondensing) Altitude: Operating 3,657.6m (12,000 ft) max Nonoperating 12,192 m (40,000 ft) max Thermal dissipation 211.937 BTU/hour (maximum) 109.261 BTU/hour (typical
ページ9に含まれる内容の要旨
Using Your Adjustable Monitor Stand: Dell™ 1707FPV Flat Panel Monitor User's Guide Back to Contents Page Using Your Adjustable Monitor Stand Dell™ 1707FPV Flat Panel Monitor User's Guide Attaching the Stand Organizing Your Cables Using the Tilt, Swivel, and Vertical Extension Removing the Stand Attaching the Stand NOTE: The stand is detached and extended when the monitor is shipped from the factory. 1. Fit the groove on the monitor to the three tabs on the stand. 2. Lower the monitor u
ページ10に含まれる内容の要旨
Using Your Adjustable Monitor Stand: Dell™ 1707FPV Flat Panel Monitor User's Guide After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable holder to neatly organize all cables as shown above. Using the Tilt, Swivel, and Vertical Extension Adjusting Your Monitor Using Tilt, Swivel, and Vertical Extension. You can adjust your monitor to best fit your viewing needs. You can adjust the stand vertically, up to 5.12 inches (1
ページ11に含まれる内容の要旨
Using Your Adjustable Monitor Stand: Dell™ 1707FPV Flat Panel Monitor User's Guide NOTE: After placing the monitor panel on a soft cloth or cushion, complete the following steps to remove the stand. 1. Rotate the stand to allow access to the stand release button. 2. Press the stand release button and lift up the stand and away from the monitor. Back to Contents Page file:///T|/htdocs/monitors/1707FPV/en/stand.htm[9/12/2012 5:23:30 PM]
ページ12に含まれる内容の要旨
Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide Back to Contents Page Setting Up Your Monitor Dell™ 1707FPV Flat Panel Monitor User's Guide Connecting Your Monitor Using the Front Panel Using the OSD Menu Setting the Optimal Resolution Using the Dell Soundbar (Optional) Connecting Your Monitor CAUTION: Before you begin any of the procedures in this section, follow the safety instructions. or file:///T|/htdocs/monitors/1707FPV/en/setup.htm[9/12/2012 5:23:33 PM]
ページ13に含まれる内容の要旨
Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide 1. Turn off your computer and disconnect the power cable. 2. Connect either the white DVI or blue VGA cables to the connectors on the computer and the monitor. Connect the USB cable that was included with your monitor to the computer and the upstream USB connector on the monitor. Once this cable is connected to the 3. computer and the monitor, you can use the USB connectors on the monitor. 4. Connect any USB devices. 5. Conn
ページ14に含まれる内容の要旨
Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide OSD menu / select Use the Input Select button to select between two different video signals that may be connected to your monitor. NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor cannot sense a video signal. Depending upon the selected input, one of the dialogs shown below will scroll continually. Video input select or Use these buttons to adjust (decrease/increase r
ページ15に含まれる内容の要旨
Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide Main Menu for Analog (VGA) Input Main Menu for Digital (DVI) Input or NOTE: Positioning and Image Settings are only available when you are using the analog (VGA) connector. 2. Push the - and + buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table below for a complete list of all the options available for the monitor. 3. Push the MENU button once to a
ページ16に含まれる内容の要旨
Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide Push the + button to increase luminance and push the - button to decrease luminance (min 0 ~ max 100). Contrast adjusts the degree of difference between darkness and lightness on the monitor screen. Push the + button to increase the contrast and push the - button to decrease the contrast (min 0 ~ max 100). NOTE: When using DVI source, the contrast adjustment is not available. Positioning: Positioning moves the viewing area ar
ページ17に含まれる内容の要旨
Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide The Phase and Pixel Clock adjustments allow you to more closely adjust your monitor to your preference. These settings are Pixel Clock accessed through the main OSD menu, by selecting Image Settings. (Coarse) Use the - and + buttons to make adjustments. (Minimum: 0 ~ Maximum: 100) Phase (Fine) If satisfactory results are not obtained using the Phase adjustment, use Pixel Clock (Coarse) and then use Phase (fine), again. NO
ページ18に含まれる内容の要旨
Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide Blue Preset is selected to obtain a bluish tint. This color setting is typically used for text based applications (spreadsheets, Blue Preset programming, text editors, etc.). Red Preset is selected to obtain a redder tint. This color setting is typically used for color-intensive applications (photograph Red Preset image editing, multimedia, movies, etc.). Normal Preset is selected to obtain the default (factory) color setti
ページ19に含まれる内容の要旨
Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide NOTE: The change only affects the OSD. It has no effect on any software running on the computer. Audio (optional) You can select to have the audio on or off when the monitor is in power saving mode. Yes — enables audio No — disables audio (default) NOTE: When the Dell Soundbar is not properly connected to the monitor, the audio menu is not available. Factory Reset: Reset the OSD menu options to the factory preset values. fil
ページ20に含まれる内容の要旨
Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide Exit — Select to exit out of Reset to Factory Settings menu without resetting any OSD options. Position settings only — Change the settings for Image Position back to original factory settings. Color settings only — Change the Red, Green, and Blue settings back to their original factory settings and set the default setting for Normal Preset. All settings — Change all the user-adjustable settings including color, position,
