ページ1に含まれる内容の要旨
Dell™ 1701FP Flat Panel Color Monitor
Quick Setup Guide
Safety Instructions
Observe the following safety guidelines when connecting and using your monitor:
Be sure that your monitor is electrically rated to operate with the AC power available in your location.
Locate your monitor near an easily accessible electrical outlet.
Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or
touched with a sharp or abrasive implement.
Put you
ページ2に含まれる内容の要旨
Monitor Controls and Indicators A Use these buttons to adjust (decrease/increase ranges) items in the OSD, buttons and to select sub-menus. B Use these buttons with the OSD to move the (highlighted) selection within menus; to select sub-menu items; and to make adjustments on various buttons selections. These buttons are also direct access buttons for the Brightness and Contrast control menu. C The MENU button opens the on-screen menu (OSD), exits from menus and sub-menus, and exits the OSD. M
ページ3に含まれる内容の要旨
3. Confirm that the driver was found on the CD, and click Next> twice to install the driver. 4. Click Finish to exit the Add New Hardware Wizard dialog box. To manually install or update the driver, perform the following steps: 1. Click Start!!!!Settings!!!!Control Panel and then double-click Display. 2. In the Display Properties window, click the Settings tab, and then click Advanced. 3. Click the Monitor tab, and then click Change. 4. When the Update Device Driver Wizard dialog box appears, f
ページ4に含まれる内容の要旨
Ensure that the computer is on. Increase brightness and contrast controls. Turn off the monitor and unplug the signal cable. Check the cable connector for bent or broken pins. With the signal cable still disconnected, turn on the monitor. If the monitor is working correctly, a self-test pattern appears. Perform a monitor reset or recall. IMPORTANT! Before contacting Dell for technical assistance, refer to the Troubleshooting section in the User's Guide on your monitor CD. This sectio
