ページ1に含まれる内容の要旨
Dell™ 3008WFP Flat Panel Monitor User's Guide
About Your Monitor Solving Problems
Product Features Monitor Specific Troubleshooting
Identifying Parts and Controls Common Problems
Monitor Specifications Video Problems
Universal Serial Bus (USB) Interface Product Specific Problems
Plug and Play Capability Universal Serial Bus (USB) Specific Problems
Card Reader Specifications Troubleshooting the Dell™ Soundbar
Maintenance Guidelines Troubleshooting the Card Reader
Setting Up the Moni
ページ2に含まれる内容の要旨
Back to Contents Page About Your Monitor Dell™ 3008WFP Flat Panel Monitor User's Guide Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Plug and Play Capability Card Reader Specifications Maintenance Guidelines Product Features The 3008WFP flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 30-inch (756.228 mm) viewable area display. ■ 2560 x 1600
ページ3に含まれる内容の要旨
3 OSD Menu/Select 4 Brightness & Contrast/Down (-) 5 Auto-adjust/Up (+) 6 Power button (with power light indicator) Back View Back view Back View with monitor stand Label Description Use VESA mounting holes (100mm) To mount the monitor. 1 (Behind attached base plate) 2 Security lock slot To help secure your monitor. 3 Barcode serial number label To contact Dell for technical support. 4 Dell Soundbar mounting brackets (2) To attach the optional Dell Soundbar. 5 Regulatory rating label List
ページ4に含まれる内容の要旨
Bottom View Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cord to wall outlet. DC power connector for Dell 2 Connect the power cord for the Soundbar (optional). Soundbar Connect the HDMI 2.0 channel or 5.1 channel audio output devices. Connect the front left/right channel output to the green connector. Use this connector for 2.0/2.1 channel audio 3 Audio connectors connection. Connect the rear left/right channel output
ページ5に含まれる内容の要旨
Pin Assignments VGA Connector Pin 15-pin Side of the Connected Signal Cable Number 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 DDC-GND 11 GND 12 DDC-SDA 13 H-sync 14 V-sync 15 DDC-SCL DVI Connector NOTE: Pin 1 is at the top left. Pin 24-pin Side of the Connected Signal Number Cable 1 T.M.D.S. Data 2- 2 T.M.D.S. Data 2+ 3 T.M.D.S. Data 2/4 Shield 4 T.M.D.S. Data 4- 5 NT.M.D.S. Data 4+ 6 DDC Clock 7 DDC Data 8 No Connect 9 T.M.D.S. Data 1-
ページ6に含まれる内容の要旨
11 T.M.D.S. Data 1/3 Shield 12 T.M.D.S. Data 3- 13 T.M.D.S. Data 3+ 14 +5V Power 15 Self Test 16 Hot Plug Detect 17 T.M.D.S. Data 0- 18 T.M.D.S. Data 0+ 19 T.M.D.S. Data 0/5 Shield 20 T.M.D.S. Data 5- 21 T.M.D.S. Data 5+ 22 T.M.D.S. Clock Shield 23 T.M.D.S. Clock + 24 T.M.D.S. Clock - 20-pin DisplayPort Connector Pin 20-pin Side of the Connected Signal Cable Number 1 ML Lane 3(n) 2 GND 3 ML Lane 3(p) 4 ML Lane 2(n) 5 GND 6 ML Lane 2(p) 7 ML Lane 1(n) 8 GND 9 ML Lane 1(p) 10 ML Lan
ページ7に含まれる内容の要旨
1 T.M.D.S. Data 2- 2 T.M.D.S. Data 2 Shield 3 T.M.D.S. Data 2+ 4 T.M.D.S. Data 1+ 5 T.M.D.S. Data 1 Shield 6 T.M.D.S. Data 1- 7 T.M.D.S. Data 0+ 8 T.M.D.S. Data 0 Shield 9 T.M.D.S. Data 0- 10 T.M.D.S. Clock + 11 T.M.D.S. Clock Shield 12 T.M.D.S. Clock - 13 CEC 14 Reserved(N.C. on device) 15 SCL 16 SDA 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect S-video Connector Pin 5-pin Side of the Connected Signal Cable Number (Cable not included) 1 GND 2 GND 3 LUMA 4 CHROMA 5 GND C
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
Universal Serial Bus (USB) Interface This section gives you information about the USB ports that are available on the left side of your monitor. NOTE: This monitor supports High-Speed Certified USB 2.0 interface. Transfer speed Data Rate Power Consumption High speed 480 Mbps 2.5W (Max., each port) Full speed 12 Mbps 2.5W (Max., each port) Low speed 1.5 Mbps 2.5W (Max., each port) USB Upstream Connector Pin Number 4-pin Side of the connector 1 DMU 2 VCC 3 DPU 4 GND USB Downstream Co
ページ10に含まれる内容の要旨
Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor. Card Read
ページ11に含まれる内容の要旨
Cards Type Support Specification Memory Card Spec Version Max. capacity CF CompactFlash Specification 2.0 128 GB xD xD Picture Card Specification 1.2 2 GB MS Memory Stick Standard Format Specification 1.40-00 128 MB MS PRO Memory Stick Pro Standard Format Specifications 1.01-01 32 GB MD Duo Memory Stick Duo Standard Format Specifications 1.10-00 128 MB/32 GB SD SD Memory Card Specifications 2.0 32 GB MMC MultiMediaCard System Specification 4.2 32 GB NOTE: MSPRO : MSPRO includes MSPRO D
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
Back to Contents Page Appendix Dell™ 3008WFP Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC Notices (U.S. Only) an
ページ14に含まれる内容の要旨
Back to Contents Page Setting Up Your Monitor Dell™ 3008WFP Flat Panel Monitor User's Guide If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Download and install the latest driver for your graphics card from the Dell Support site at: support.dell.com. 2. Set the resolution to 1920 x 1200/2560 x 1600. NOTE: If you are unable to set the resolution to 1920 x 1200/2560 x 1600, please contact Dell™ to inquire about a graphics adapter that supports these resol
ページ15に含まれる内容の要旨
Back to Contents Page Setting Up Your Monitor Dell™ 3008WFP Flat Panel Monitor User's Guide If you have non Dell™ desktop, portable computer, or graphic card In Windows XP: 1. Right-click on the desktop and click Display Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Select the Adapter tab. The Adapter Type lists the graphics adapter on your system. 5. Download and install the latest drivers from the graphics card manufacturers web site. (You can download drivers for
ページ16に含まれる内容の要旨
Back to Contents Page Operating the Monitor Dell™ 3008WFP Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Optimal Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel, and Vertical Extension Using the Front Panel Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the num
ページ17に含まれる内容の要旨
or or B Use this button to activate Picture by Picture (PBP) mode adjustment. Picture by Picture (PBP) Select C Use the MENU button to launch the on-screen display (OSD) and select the OSD Menu. See Accessing the Menu System. OSD Menu/Select D Use this button for direct access to the "Brightness" and "Contrast" control menu. Brightness/Contrast Hot Key E Use these buttons to navigate and adjust the slider-bar (decrease/increase ranges) controls in the OSD. Down (-) and Up (
ページ18に含まれる内容の要旨
NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector. 2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor. 3. Push the MENU button once to activate the highlighted option. 4. Push the and buttons to select the desired parameter. 5. Push to enter the slide bar and then use the or butto
ページ19に含まれる内容の要旨
Push to go back to the main menu. Back Auto Select Push to scan for available input signals. VGA Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source. DVI-D1/ DVI-D2 Select DisplayPort input when you are using DisplayPort connector. Push to select the DisplayPort input source. DisplayPort HDMI Select HDMI inp
ページ20に含まれる内容の要旨
Color setting submenu for VGA/DVI-D input Color setting submenu for Video Input or VGA/DVI-D input Video input Back Push to go back to the main menu. Input Color Choose the RGB option if monitor is connected to a PC or a DVD using a VGA or a DVI cable. Choose the YPbPr option if monitor is Format connected to a DVD by a YPbPr cable. Gamma To achieve the different color mode for PC and Mac. Color Setting You can choose between a Graphics and a Video mode. I
