ページ1に含まれる内容の要旨
BID SPECIFICATION
FOR
BROADCAST CRT MONITORS
MODEL NUMBER
BVM-D24E1WU
INSTRUCTIONS:
REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND
PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST YOU IN
CLEARLY SPECIFYING THE SONY PRODUCT IDENTIFIED ABOVE, AND ENSURING
THAT THE BUYER IS WELL INFORMED OF THE HIGH STANDARD OF
PERFORMANCE THAT IS TO BE EXPECTED OF A SONY PRODUCT. THE
INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JUNE 2002. PRODUCT
SP
ページ2に含まれる内容の要旨
1.0 General Information The purpose of this information is to provide the specification for a product whose primary purpose is the reproduction of video information for one or more viewers. This reproduction of this information is to be accomplished via a direct-view CRT monitor. This document provides the minimum specifications for this device. The performance comparison of displays is not only technical in nature, but is also subjective to the user, when viewed in the final display
ページ3に含まれる内容の要旨
4.0 User Interface / Controllability Information Control of this device shall be accomplished through one of the following methods: Parallel Remote Control RS-485 Serial Control This device shall provide a Type II PCMCIA card slot to store monitor settings locally. The optional parallel remote control shall provide access to all monitor setup functions. The serial control jack shall employ the use of a standardized device control protocol that is understood by external control
ページ4に含まれる内容の要旨
This device shall support switchable aspect ratios of 4:3 and 16:9, and shall offer a 4:3 area marker. This device shall provide beam landing correction to compensate for changes in the terrestrial magnetic field in different operating environments. This device shall include digital point convergence for complete RGB convergence accuracy within the image area. A built-in test pattern generator shall be included for assistance in convergence and other monitor setup functions. This de
ページ5に含まれる内容の要旨
This device shall accept power at 100 - 240 VAC at either 50 or 60 Hz. This device shall consume no more than 205 watts. Power to this device shall be supplied via a detachable standard power cord that is readily available for replacement from local suppliers. 9.0 Safety Compliance Information This device shall be fully compliant with the following standards: UL 1950 CSA 950 (cUL listed) FCC Class-A IC Class-A DHHS DNHW 10.0 Warranty Information This device shall carr
