ページ3に含まれる内容の要旨
w w w. a u t o m a t i o n d i r e c t . c o m 5. Connect Power to the Monitor Power Connections: • Power source needs to be 100 - 240 VAC, 50/60 Hz, 35 Watts. 100 VAC - 240 VAC INPUT (1.0 Amps Min) • See connection diagram below. PIN No. Definition TOP VIEW 1 2 3 • Secure power connector screws to monitor. 1 AC Line Input • Power should not be applied until all cables are attached and the 2 AC Neutral Return monitor is ready to operate. 3 Protective Earth Ground ADC P.N. ATM-AC-CON or PHOENIX
ページ4に含まれる内容の要旨
w w w. a u t o m a t i o n d i r e c t . c o m Accessories & Replacement Parts: Part Number Description 10 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card. ATM-CBL-VGA10 ATM-CBL-VGA25 25 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card. ATM-CBL-VGA50 50 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card. 6 ft. (2 meter) DVI (type D) video cable. Connects M1700 and M1900 to a standard DVI-D port. DVI ATM-C
ページ1に含まれる内容の要旨
w w w. a u t o m a t i o n d i r e c t . c o m
TM
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860, USA
A AT TL LA AS S
INDUSTRIAL FLAT PANEL PC MONITOR
QUICK INSTALLATION GUIDE - ATM1900/ATM1900T
Description:
The Atlas ATM1900/ATM1900T is a high performance 19" color TFT
flat panel monitor specifically designed for harsh industrial
environments including Class I & II, Division 2 Hazardous Locations.
The ATM1900/ATM1900T accepts standard analog VGA input or
digital DVI input, and can display all VESA
ページ2に含まれる内容の要旨
w w w. a u t o m a t i o n d i r e c t . c o m 2. Install Monitor through Enclosure Door or Wall Mounting Clip Installation: • Use dimensions as shown in the diagram below to provide a rectangular mounting cutout in an approved NEMA 4/12 enclosure’s door or wall. • Mount the monitor through the enclosure cutout, install and tighten (14) mounting clips to a torque of 8.0 inch-pounds as shown in the diagram to the right. Cutout Dimensions: CUT AWAY VIEW CUTOUT WARNING: Damage can occur by applying
