ページ1に含まれる内容の要旨
LCD MONITOR
quick start guide
T200HD / T220HD
ページ2に含まれる内容の要旨
Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without stand With stand Monitor Monitor Manuals Quick Setup Guide Warranty Card User's Guide (Not available in all loca- tions) Cables D-Sub Cable Power Cord Sold separately DVI Cable HDMI Cable Headphones
ページ3に含まれる内容の要旨
Introduction Sold separately Stereo Cable TV Antenna Cable Component(P , P , Y) Cable R B (Coaxial Cable) Audio cable Digital audio optic output ca- USB Cable ble Others Remote Control Batteries (AAA X 2) Cleaning Cloth BN59-00678A (Not available in all loca- tions) Cable holding ring Stand Body Stand Base Note Cleaning Cloth is only provided for highly polished black products as a product feature.
ページ4に含まれる内容の要旨
Introduction Your Monitor Front Activates a highlighted menu item. Push the ' ', button to change the input signal source. Changing the source is only allowed for external devices connected to the product at the time. To switch Screen modes: [PC] → [DVI] → [TV] → [Component] → [HDMI1] → [HDMI2] >> Click here to see an animation clip MENU Use this button to open the on-screen menu and to exit from the on-screen menu or to close the screen adjustment menu. - VOL+ Moves from one menu item to anothe
ページ5に含まれる内容の要旨
Introduction Note The button to the right of the monitor are touch-sensitive buttons. Touch a button lightly with your finger. Power indicator This light is lit when operating normally, and blinks once when your adjustments are saved. Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods. Speaker Rear Note The configuration at the
ページ6に含まれる内容の要旨
Introduction PC Connect the PC terminal at the back of your monitor to your computer. PC/DVI-D AUDIO IN / DIG- ITAL AUDIO OUT(OPTI- CAL) / EX-LINK PC/DVI-D AUDIO IN Connect the [ PC/DVI-D AUDIO IN ] terminal at the back of your product to your computer’s sound card. DIGITAL AUDIO OUT(OPTICAL) Connect the [DIGITAL AUDIO OUT(OPTI- CAL)] terminal of your product to the digital sound output or standard sound output terminal of the DVD home theater (or amplifier) using a digital audio optical ou
ページ7に含まれる内容の要旨
Introduction The Kensington Lock is a device used to phys- ically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately. Note The location of the Kensington Lock may be dif- ferent depending on its model. Using the Anti-Theft Kensington
ページ8に含まれる内容の要旨
Introduction Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the prod- uct. Make sure to use a TV antenna cable (sold separately) as the antenna cable. HDMI IN 2 / HDMI IN 2 Connect the [HDMI IN 2] terminal at the back of your product to the HDMI terminal of your digital output device using a HDMI cable. Connect your headphones to the Headphone con- nection terminal. Note See Connecting Cables for further information regarding cable connections. Cable ho
ページ9に含まれる内容の要旨
Introduction POWER TV Number Buttons - button + VOL - TOOLS Down-Up Left-Right buttons INFO COLOR BUTTONS CC MTS MENU SOURCE PRE-CH CH MUTE RETURN ENTER EXIT SRS FAV.CH P.SIZE Turns the product On/Off. 1. POWER Selects the TV mode directly. 2. TV 3. Number Buttons Press to change the channel. 4. - button The "-" button operates only for DTV. It is used to select MMS (multi-channel) for a DTV. 5. + VOL - Adjusts the audio volume. 6. TOOLS Use to quickly select frequently used funct
ページ10に含まれる内容の要旨
Introduction 11. MTS You can select the MTS (Multichannel Television Stereo) mode. Mono, Stereo, SAP (Separate Audio Program) Set 'MTS' to ON to choose Mono, Stereo or SAP. Opens the on-screen menu and exits from the menu or closes the 12. MENU adjustment menu. Press the button to change the input signal SOURCE.Changing 13. SOURCE the SOURCE is only allowed for external devices that are con- nected to the monitor at the time. 14. PRE-CH This button is used to return to the immediately previous
ページ11に含まれる内容の要旨
Connections Connecting Cables Connecting to a Computer Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. • Connect the signal cable to the [PC] port on the back of your monitor. [PC] Using the DVI (Digital) connector on the video card. • Connect the DVI Cable to the [DVI-D] Port on the back of your
ページ12に含まれる内容の要旨
Connections • If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analogue. Press 'SOURCE [ ]' button to have the monitor double-check the input signal source. Connecting to a Macintosh 1. Using the D-sub (Analog) connector on the video card. • Connect the signal cable to the D-SUB port on the back of your monitor. [PC] Note Turn on the monitor and Macintosh. Connecting to Other devices Note • This monitor
ページ13に含まれる内容の要旨
Connections 1. Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor. Make sure to use a TV antenna cable (sold separately) as the antenna cable. • When using an interior antenna terminal: Check the antenna terminal on the wall first and connect the antenna cable. • When using an outdoor antenna: If you are using an outdoor antenna, use a professional for installation if possible. • To connect the RF cable to the antenna input terminal: Keep the copper w
ページ14に含まれる内容の要旨
Connections Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the monitor. Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the [P , P ,Y] input ports using R B a component video cable (P , P ,Y). R B Note Select "Component" using the 'SOURCE [ ]' If you connect the P , P , and Y component cables to the incorrect terminals, the screen will be R B displayed in red or blue. For single-family houses, install an UHF antenna to receive digital broadcasti
ページ15に含まれる内容の要旨
Connections 2. Connecting Using a DVI to HDMI Cable Connect the DVI output terminal of a digital output device to the [HDMI IN 1] terminal of the monitor using a DVI to HDMI cable. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the [PC/DVI AUDIO IN]terminal of the monitor. 3. When all the connections are completed, connect the power cords for the monitor and DVD (or t
ページ16に含まれる内容の要旨
Connections 2. Set the Internal Mute On in the Sound menu using the MENU button. 3. Adjust the sound volume using the Volume button of your amplifier 4. If the connections are set up, power up your monitor and amplifier. Note • If no sound is emitted from the monitor, you need to use an amplifier. • For information on how to connect a speaker and amplifier, refer to the respective user manuals provided by their manufacturers. Connecting Headphone Note You may connect your headphones to the mon
ページ17に含まれる内容の要旨
Connections Tilt angle Note You can tilt the monitor upwards at an angle of -1° to 21°.
ページ18に含まれる内容の要旨
Troubleshooting Self-Test Feature Check Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor. If the monitor is functioning properly, you will see a box in the illustration below. This box appears during normal operation if the video cable becomes disconnected or damaged. 4. Turn o
ページ19に含まれる内容の要旨
Troubleshooting • Do not use benzene, thinner or other flammable substan- ces, or a wet cloth. • We recommend a Samsung cleansing agent is used to pre- vent damage to the screen. 2. Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen sur- face.) • The user will be required to pay costs and related expenses for repair of damages caused by improper cleaning and usag
ページ20に含まれる内容の要旨
Troubleshooting PC Mode Q: It appears the PC does not function normally. A: Check if the Display Adapter Driver (VGA Driver) is properly installed. (Refer to Installing Driver) Q: The monitor screen flickers. A: Check if the signal cable between the computer and the monitor is securely connected and tight- ened.(Refer to Connecting the monitor) TV Mode Q: TV screen is blurred or shows noise signals. A: Check if the TV antenna connector is securely connected to the external antenna.(Refer to Conn
