ページ1に含まれる内容の要旨
SyncMaster 710NT
Install drivers Install programs
ページ2に含まれる内容の要旨
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode.
ページ3に含まれる内容の要旨
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy o
ページ4に含まれる内容の要旨
Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the monitor. Do not dro
ページ5に含まれる内容の要旨
Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm / 4 inchs) for ventilation p
ページ6に含まれる内容の要旨
If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent.
ページ7に含まれる内容の要旨
Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the
ページ8に含まれる内容の要旨
When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time. Adjust the resolution and frequency to the levels appropriate for the model. An inappropriate resolution may cause undesirable picture quality. 17 inch (43 cm) - 1280 X 1024 Keep the volume at a comfortable level when using the hea
ページ9に含まれる内容の要旨
keep the product unplugged. Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing physical damage or even death. Proper Seating Posture During Monitor Use Periodically take a 10 minute break every hour or so to relieve
ページ10に含まれる内容の要旨
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor Manual User's Guide, Warranty Card Monitor Driver, Quick Setup Guide (Not available in all Natural Color software, locations) MagicTune™ software, MagicRotation software Cable D-sub Cable Power Cord LAN Cable
ページ11に含まれる内容の要旨
Sold separately Keyboard (USB) Mouse (USB) Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. MagicBright™ MagicBright™ is a new feature providing optimum viewing [] environment depending on the contents of the image you are watching. Currently six different modes are available: Custom, Text, Internet, Game, Sport and Movie. Each mode has its own pre-configured brightness value. You can easily select one o
ページ12に含まれる内容の要旨
graphics. 4) Game For watching motion pictures such as a game. 5) Sport For watching motion pictures such as a sport. 6) Movie For watching motion pictures such as a DVD or Video CD. >>Click here to see an animation clip When OSD is not on the screen, push the button to adjust Volume button[ ] volume. Adjust items in the menu. Adjust buttons [ ] Enter button [ ] / Activates a highlighted menu item. / SOURCE button Push the 'SOURCE', then selects the video signal while the OSD is off.
ページ13に含まれる内容の要旨
Connect a monitor to another monitor through a D-Sub cable. VGA OUT port Kensington Lock The Kensington lock is a device used to physically fix the system to something when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact the place of purchase. Headphone connection terminal. [] AUDIO IN Connect the audio cable for your monitor to the audio port on the back of your computer. You can connect USB devices such as
ページ14に含まれる内容の要旨
Tuning the power off while booting up a Client may damage the monitor. In addition, exit all running programs before turning the monitor off. What is Client Monitor? Client Monitor is a new type of monitor that can be used as a general monitor and can also be used as a terminal by connecting it to a host PC with a LAN connection so that you can use a Client Monitor to access the Internet, create a document and edit an image file. In addition, you can connect an external stora
ページ15に含まれる内容の要旨
Connecting a Client Monitor 1) Connect to the host PC using a LAN cable Host PC Hub LAN Cable Client Monitor 1. Connect the power cord to the power terminal at the back of the monitor. 2. Connect the mouse and the keyboard to the USB ports. 3. Connect the LAN port on the back of the monitor and the hub. 4. Connect the hub and the LAN port of the host PC. The host PC must have an IP address. After connecting the LAN and setting the IP address, you can v
ページ16に含まれる内容の要旨
1. When starting the system for the first time, the Thin Client Setup Wizard is launched as shown below. If is not clicked during the 15 second countdown after the first 30 Next seconds, all settings are configured to the factory defaults and the setup wizard is exited. 2. When entering a terminal name and clicking on Network Properties, the Network Manager dialog box is displayed. This dialog box shows a list of adapters installed on your terminal. You can change the properties
ページ17に含まれる内容の要旨
3. Configure the resolution, the color settings, and the screensaver. Then click . Next 4. Select the to use with the terminal. shell interface Click to proceed to the next step. Next
ページ18に含まれる内容の要旨
5. In the next window, set the other terminal properties and click on Next. For more information on terminal properties, refer to Configuring the Client Monitor Environment . 6. If you want to change any of the settings you have configured, click on or click on Back to complete the Setup Wizard. Finish The thin client then completes the Setup Wizard and restarts the terminal automatically.
ページ19に含まれる内容の要旨
3) Connecting to the Host PC You can add, edit or remove connections using the Terminal Connection Manager (Thin Client Shell)or the icon/menus on the Desktop. However, this function requires administrator privileges. If you logged on as a limited user, the menus for configuring connections are hidden or deactivated. If you click the Add button or the Add New Connection menu on the Terminal Connection Manager, the New Connection window is displayed. If you select a connecti
ページ20に含まれる内容の要旨
Click Next to proceed to the next step. 2. Enter the name that will be displayed in the list on the Terminal Connection Manager (or as a connection icon on the Desktop) and click Next. 3. When you connect to the server, the server’s Desktop is displayed on the monitor, by default. If you want to start an application when connected, enter its name and working directory. Click Next to proceed to the next step. 4. If you want to log on the server automatically when connec
