ページ16に含まれる内容の要旨
SyncMaster 153B/173B Unpacking Front Rear 1. Auto button / Use this button to auto adjustment direct access. / Exit button Use this button to Exit the active menu or the OSD. 2. Menu button These buttons allow you to highlight and adjust items in the menu. 3. Power button Use this button to turn the monitor on and off. 4. Adjust buttons These buttons allow you to highlight and adjust items in the menu. When OSD is not on the screen, push the - or + button to adjust volume. a. Power indic
ページ17に含まれる内容の要旨
SyncMaster 153V/173V/152V/172V/193V/192V Unpacking Front Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. Note: See Connecting Your Monitor for further information regarding cable connections.
ページ18に含まれる内容の要旨
SyncMaster 153S/173S Unpacking Front Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the DC Adapter for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Pin Press the button on the bottom rear of the stand in order to lock down the stand. Note : Always have your monitor faced front side down on a level surface
ページ19に含まれる内容の要旨
SyncMaster 153B/173B Unpacking Front Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Pin Press the button on the bottom rear of the stand in order to lock down the stand. Note : Always have your monitor faced front side down on a level surface
ページ20に含まれる内容の要旨
SyncMaster 153V/173V/152V/172V/193V/192V English > Main > Setup > Connecting Your Monitor Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Connect the monitor to the Macintosh computer using the D-SUB co
ページ1に含まれる内容の要旨
SyncMaster 153V/173V/152V/172V/193V/192V/153S/173S/153B/173B
ページ2に含まれる内容の要旨
Main Page On-Screen Display Safety Instructions Troubleshooting Notational Check List Power Q & A Installation Self-Test Feature Check Cleaning Other Introduction Specifications Unpacking General Specifications Front PowerSaver Rear Preset Display Modes Setup Information Connecting Your Monitor Service Installing the Monitor Driver Terms Automatic Regulatory Manual Natural Color Installing VESA compliant mounting For Better Display Authority
ページ3に含まれる内容の要旨
Notational Power Installation Clean Other Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock
ページ4に含まれる内容の要旨
When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode. Notational Power Do not use a damaged or loose plug. Installation Clean This may cause an electric shock or fire. Other Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and reoeptacle. An improper ground may cause electric shock or equipment damage. Do not
ページ5に含まれる内容の要旨
Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Notational Power Installation Clean Put your monitor in a location with low humidity and a minimum of Other dust. An electric shock or fire could result inside the monitor. Do not drop the monitor when moving it. This may cause damage to the product or human body. Place the monitor on a flat and stable surface. The monitor can cause injury by falling. Set down the monitor carefully. I
ページ6に含まれる内容の要旨
When cleaning the monitor case or the surface of the TFT-LCD, wipe with a slightly moistened, soft fabric. Notational Power Do not spray detergent directly on the monitor. Installation Clean Other Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector can cause an electric shock or fire. Do not set a glass of water, chemicals or any small metal objects on the monitor.
ページ7に含まれる内容の要旨
Do not remove cover(or back). No user serviceable parts inside. This may cause an electric shock or a fire. Refer servicing to qualified service personnel. Notational Power Installation Clean If your monitor does not operate normally - in particular, if there Other are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. This may cause an electric shock or a fire. Do not place any heavy objects on the monitor. This may
ページ8に含まれる内容の要旨
Possible fire hazard. Keep power adaptor away from any other heat source. Possible fire hazard. Remove and discard vinyl bag from power adaptor before use. Possible fire hazard. Always keep power adaptor in well-ventilated area. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.
ページ9に含まれる内容の要旨
Do not remove cover(or back). No user serviceable parts inside. This may cause an electric shock or a fire. Refer servicing to qualified service personnel. Notational Power Installation Clean If your monitor does not operate normally - in particular, if there Other are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. This may cause an electric shock or a fire. Do not place any heavy objects on the monitor. This may
ページ10に含まれる内容の要旨
Possible fire hazard. Keep power adaptor away from any other heat source. Possible fire hazard. Remove and discard vinyl bag from power adaptor before use. Possible fire hazard. Always keep power adaptor in well-ventilated area. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.
ページ11に含まれる内容の要旨
SyncMaster 153V/173V/152V/172V/193V/192V Power Cord Monitor and Stand Unpacking Front Signal Cable Rear Quick Setup Guide Please make sure the following items are included with your monitor. If any items are missing, Warranty Card contact your dealer. (Not available in all locations) User's Guide and Driver Installation CD
ページ12に含まれる内容の要旨
SyncMaster 153S/173S Power Cord Monitor and Pivot Stand Unpacking Front DC-Adapter Rear Signal Cable Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Quick Setup Guide Warranty Card (Not available in all locations) User's Guide and Driver Installation CD Pivot S/W CD(Option)
ページ13に含まれる内容の要旨
SyncMaster 153B/173B Power Cord Monitor and Stand Unpacking Front DC-Adapter Rear Signal Cable Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Audio Cable Quick Setup Guide Warranty Card (Not available in all locations) User's Guide and Driver Installation CD Pivot S/W CD(Option)
ページ14に含まれる内容の要旨
SyncMaster 153V/173V/152V/172V/193V/192V Unpacking Front Rear 1. Auto button / Use this button to auto adjustment direct access. / Exit button Use this button to Exit the active menu or the OSD. 2. Menu button These buttons allow you to highlight and adjust items in the menu. 3. Power button Use this button to turn the monitor on and off. 4. Adjust buttons These buttons allow you to highlight and adjust items in the menu. a. Power indicator This light glows green during normal operation,
ページ15に含まれる内容の要旨
SyncMaster 153S/173S Unpacking Front Rear 1. Auto button / Use this button to auto adjustment direct access. / Exit button Use this button to Exit the active menu or the OSD. 2. Menu button These buttons allow you to highlight and adjust items in the menu. 3. Power button Use this button to turn the monitor on and off. 4. Adjust buttons These buttons allow you to highlight and adjust items in the menu. a. Power indicator This light glows green during normal operation, and blinks green onc
