ページ1に含まれる内容の要旨
SPC-57
5.7” STN LCD Smart Panel
Computer with Intel Xscale CPU
and Windows CE.NET
Users Manual
ページ2に含まれる内容の要旨
Copyright This document is copyrighted, © 2004. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacture
ページ3に含まれる内容の要旨
FCC Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with this user's manual, it may cause harmful interference to radio communications.
ページ4に含まれる内容の要旨
Packing List Before you begin to use SPC, please make sure that the following materials have been shipped. SPC-57 Smart Panel Computer ® ® Windows CE.NET end user license agreement (for Windows CE.NET version) ® Advantech Software Support CD (Windows CE.NET) • Readme.txt • Datasheet • User manual ® ® •Windows CE.NET 4.2 platforms SDK (for Windows CE.NET) ® • Microsoft ActiveSync Version 3.7 install files (for Windows CE.NET). Power connector Plastic Stylus for touch-screen
ページ5に含まれる内容の要旨
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Dropping it or letti
ページ6に含まれる内容の要旨
disclaims all responsibility for the accuracy of any statements contained herein.
ページ7に含まれる内容の要旨
Wichtige Sicherheishinweise 1. Bitte lesen sie Sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den späteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. 5. Das Gerät ist vor Feuchtigkeit zu schützen. 6. Bei der Aufstellung des Gerätes ist auf s
ページ8に含まれる内容の要旨
CHAPTER 1 General Information This chapter gives background Information of the SPC-57 Sections include: • Introduction • Specification • LCD Specification • Touchscreen Specification • Power • I/O ports • Mounting • Dimension and cutout
ページ9に含まれる内容の要旨
1.1 Introduction Intel® XScale®, Ultra Low Power, Embedded Applications Anywhere!! Advantech smart panel computers enable great embedded flexibility when powered by Intel® XScale® technology. Built with an Intel PXA255 CPU, LCD display, touchscreen, and pre-installed with Microsoft® Windows CE .NET 4.2 and LAN, the SPC series provide the best cost-effective and stable solution to customers for a diverse range of embedded applications. The great features of SPC, ultra low power, compact
ページ10に含まれる内容の要旨
1.2 Specifications There are 2 models of SPC-57 series, SPC-57E and SPC-57C. SPC-57C is the fully enclosure with standard external I/O connector. SPC-57E is without back cover, without standard external I/O connector, and without Flash memory on board. SPC-57E and SPC-57C can fulfill different applications and various demands from the customer. SPC-57C System kernel CPU Intel PXA-255 200MHz on board OS Windows CE .NET 4.2 SDRAM 64MB SDRAM on board Flash 32MB on board for OS pre-i
ページ11に含まれる内容の要旨
Power switch 1 power switch Power conn 1 power connector SW reset Through system configurator to execute the SW reset Mechanical Dimension 210 X 155 X 41 (mm) Material SPCC Certification CE, FCC class A, UL Environmental Operating temp 0 degree C ~ 50 degree C Storage temp -20 degree C ~ 60 degree C Water/dust IP65 for front bezel resistance SPC-57E System kernel CPU Intel PXA-255 200MHz on board OS Windows CE .NET 4.2 SDRAM 64MB SDRAM on board Flash N/A for SPC-57E. Users
ページ12に含まれる内容の要旨
Power V-in range DC 10V ~ 28V Protection Over current protection; Electric pole reverse protection SM bus For smart battery, pin headers Power switch 1 power switch Power conn 1 power connector SW reset Through system configurator to execute the SW reset Mechanical Dimension 210 X 155 X 41 (mm) Material SPCC Certification CE, FCC class A, UL Back cover Without back cover; without I/O board; Environmental Operating temp 0 degree C ~ 50 degree C Storage temp -20 degree C ~ 60 deg
ページ13に含まれる内容の要旨
1.3 LCD Specifications LCD model Nan Ya LMB61-23 Display type STN color LCD Size (Diagonal) 5.7” Resolution 320 x 240 (VGA) Maximum colors 256 Pixel pitch (WxH, mm) 0.36 X 0.36 2 2 Luminance (cd/m) 165 cd/m Contrast ratio 35 Response time Rise 300 ms, Fall 80 ms Lamp lifetime 20000 hours 1.4 Touchscreen Specifications Type Resistive Base glass construction Tempered Glass Resolution Continuous Light transmission 75% typical Durability 100000 activations for written character
ページ14に含まれる内容の要旨
1.6 I/O Ports Arrangement USB Power RJ-45 Host Switch RS-232 RS-485 Line out USB Power jack Client Connector PCMCIA CompactFlash Slot TypeII Slot
ページ15に含まれる内容の要旨
1.7 Mounting
ページ16に含まれる内容の要旨
ページ17に含まれる内容の要旨
1.8 Dimension and cutout
ページ18に含まれる内容の要旨
CHAPTER 2 Getting Start This chapter provides brief instructions for operating the SPC-57
ページ19に含まれる内容の要旨
2.1 Quick Starting Step1: Unpack the SPC-57 from its packing. Please check the packing list at the beginning of this manual. Step2: Connect the power connector to 10 ~ 28 Vdc power source. The power source can either be from a power adapter or an in-house power source. Step3: Connect the power source to the system power supply. Step4: Plug in the power lines and turn on the system power switch, you will see the ® Welcome screen of Windows CE.NET. Then you can start to use SPC-57. Step5:
ページ20に含まれる内容の要旨
Vcc GND 4. Plug the male power connector into female power connector in SPC.
