ページ1に含まれる内容の要旨
Table of Contents
Precautions...................................................................................................................... 1
Package contents............................................................................................................. 2
Installation instructions ................................................................................................. 2
Assembling the Monitor ..................................................................
ページ2に含まれる内容の要旨
English Package contents LCD Monitor Power Cord Audio Cable User Manual Installation instructions Assembling the Monitor 1. Position the monitor on top of the 2. Connect the stand into the neck of the stand. monitor along the track. Detaching the Monitor Important First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean dry cloth under the monitor to protect it further. Pull the monitor slightly up and away from the st
ページ3に含まれる内容の要旨
Adjusting the Viewing Angle The viewing angle of the monitor ranges from 0°~20°. Caution: Make sure that the computer and the monitor are both disconnected from the power supply. Connecting the Devices Power Code Attach the monitor to the power cord which should then be inserted into a properly grounded electric socket. Audio cable Connect the audio input socket of the LCD monitor and the computer by means of the audio cable. VGA Cable Connect the signal cable to the VGA ou
ページ4に含まれる内容の要旨
English Adjusting display settings External Controls If OSD is active, press to enter a selection in OSD. If OSD is inactive, press and the monitor 1. AUTO will automatically optimize the position, clock and phase of your display. Press to view OSD. 2 OSD Function Press again to exit. Power on/off 3 POWER Green: power on Orange: in sleep mode If OSD is active, press to select or adjust OSD options. If OSD is inactive, press once, then 4 MINUS < press the buttons marke
ページ5に含まれる内容の要旨
OSD options Please refer to "External Controls" on Page 5. To adjust the OSD settings: 1. Press the MENU button to open the OSD menu. 2. Use the buttons marked < or >, to highlight a control, then press the AUTO button to enter 3. Use the buttons marked < or >, to adjust the control to the desired level. 4. When you have finished making all selections, press the MENU button to exit the OSD. (Or the adjustment will auto-save after 45 seconds.) OSD Menu Brightness & Contrast
ページ6に含まれる内容の要旨
English Position V-Position: This adjusts the vertical. H-Position: This adjusts the horizontal. Color There are three ways of adjusting color: 9300K: Bluish white 6500K: Reddish white User defined: You can adjust the colors red, green and blue to the intensity you desire. Other Controls LANGUAGE: Select the OSD menu language from English, German, French, Italian and Spanish. OSD POSITION: This changes the position of the OSD window on the screen INFORMATION
ページ7に含まれる内容の要旨
Troubleshooting Problems Possible Solutions Power LED is not ON • Check to see if the power switch is in the ON position. • Ensure that the Power Cord is connected. No Picture • Check to see if the power switch is in the ON position. • Ensure that the Power Cord is connected. • Ensure the video cable is securely connected to the back of the monitor and the computer. • Move the mouse or press any key on the keyboard to bring the monitor out of "active off" mode. Picture shows
ページ8に含まれる内容の要旨
English General specifications Item Specification LCD Panel Display 17-inch Flat panel active-matrix TFT LCD Max resolution SXGA 1280×1024 pixels Pixel Pitch 0.264 mm Color 16.2M Brightness 300 cd/m² ( Typical) Contrast Ratio 450:1 (Typical) Response Time 4ms +16ms /20ms (Tr+Tf / typical) View Angle of Horizontal 75° / 75° View Angle of Vertical 65° / 60° External Controls Power Button ON/ OFF Control Buttons Auto, MENU, <, > OSD Function Brightness Co