ページ1に含まれる内容の要旨
Table of Contents
Precautions .....................................................................................................................2
Package contents ............................................................................................................3
Installation instructions.................................................................................................3
Assembling the Monitor..................................................................
ページ2に含まれる内容の要旨
Precautions The monitor may be damaged if placed too near a source of heat. Be aware of the location of radiators, cookers, open fires etc. Do not cover the slots and openings on the back or top of the cabinet as the monitor requires ventilation. The monitor should be located in a well-ventilated room to prevent the possibility of overheating. Do not allow sharp objects such as knives, pens, or pencils near the screen. If such objects touch the screen, the LCD panel will be
ページ3に含まれる内容の要旨
acer acer Package contents LCD Monitor Power Cord VGA Cable Audio Cable User Manual (CD) Quick Start Guide Installation instructions Assembling the Monitor 1. Position the monitor on top of the stand. 2. Connect the stand into the neck of the monitor along the track. 3
ページ4に含まれる内容の要旨
Detaching the Monitor If you need to repackage the monitor, please separate the monitor and base, and restore them to the carton. To detach the monitor: 1. Unplug the AC power cord to make sure the power is off. 2. Pull the 4 hooks on bottom side of the base and hold. 3. Separate the monitor and base and put them into carton. Important First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean dry cloth under the monitor to protec
ページ5に含まれる内容の要旨
Connecting the Devices Caution: Make sure that the computer and the monitor are both disconnected from the power supply. AC IN A U D IO IN D-SUB IN 2 VGA 3 Audio 1 1 3 2 AC AC Audio VGA Power Code Attach the monitor to the power cord which should then be inserted into a properly grounded electric socket. VGA Cable Connect the signal cable to the VGA input socket of the monitor , and connect the signal cable to the VGA output socket of the graphics card on the computer. Then t
ページ6に含まれる内容の要旨
Adjusting display settings 1 2 3 4 5 AUTO < > ME N U External Controls If OSD is active, press to exit a selection in OSD. If OSD is inactive, press and the monitor will automatically optimize the 1 AUTO position, focus and clock of your display. If OSD is active, press to select or adjust OSD options. If OSD is inactive, press once, then press the buttons marked < or > to adjust 2 MINUS < the volume. If OSD is active, press to select or adjust
ページ7に含まれる内容の要旨
OSD options Please refer to "External Controls" on Page 6. To adjust the OSD settings: 1. Press the MENU button to open the OSD menu. Press again to enter a selection of 10 functions on OSD. 2. Use the buttons marked < or >, to highlight a control, then adjust the control to the desired level. 3. When you have finished making all selections, press the AUTO button to exit the OSD. OSD Menu Contrast: This adjusts dark and light shades of color relative to each other to ac
ページ8に含まれる内容の要旨
LANGUAGE: Select the OSD menu language from English, German, Spanish, Russian, Traditional Chinese, French, Italian, and Japanese. OSD SETTING: This changes the position of the OSD window on the screen and staying time. Auto Config: System runs auto-configuration. INFORMATION: This shows brief information on the screen. Reset: Recall to default settings. Exit: Exit from OSD. 8
ページ9に含まれる内容の要旨
Troubleshooting Problems Possible Solutions Power LED is not • Check to see if the power switch is in the ON position. ON • Ensure that the Power Cord is connected. No Picture • Check to see if the power switch is in the ON position. • Ensure that the Power Cord is connected. • Ensure the video cable is securely connected to the back of the monitor and the computer. • Move the mouse or press any key on the keyboard to bring the monitor out of "active off" mode. Picture s
ページ10に含まれる内容の要旨
General specifications Item Specification LCD Panel Display 19-inch Flat panel active-matrix TFT LCD Max resolution SXGA 1280×1024 pixels Pixel Pitch 0.294 mm Color 16.2M Brightness 250 cd/m² (Typical) Contrast Ratio 500:1 (Typical) Response Time 12ms (Typical) View Angle of Horizontal 140° View Angle of Vertical 140° External Controls Power Button ON / OFF Control Buttons Auto, <, >, MENU OSD Function Contrast /Brightness Contrast / Brightness Focus/Clock Focus /
