ページ1に含まれる内容の要旨
3-864-156-31 (1)
Trinitron Color
Graphic Display
GB
Operating Instructions
FR
Mode d’emploi
DE
Bedienungsanleitung
ES
Manual de instrucciones
IT
Instruzioni per l’uso
GDM-F400T9
GDM-F500T9
© 1999 by Sony Corporation
ページ2に含まれる内容の要旨
Owner’s Record Hinweise • Aus ergonomischen Gründen wird empfohlen, die The model and serial numbers are located at the rear of the unit. Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden Record these numbers in the spaces provided below. Refer to them (schlechte Erkennbarkeit, Augenbelastung bei zu geringem whenever you call upon your dealer regarding this product. Zeichenkontrast). Model No. Serial No. • Aus ergonomischen Gründen (
ページ3に含まれる内容の要旨
Table of Contents Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Step 1: Connect your monitor to your computer . . . . . . . . . . . . . . . 6 Step 2: Connect the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Step 3: Turn on the monitor an
ページ4に含まれる内容の要旨
Use of the tilt-swivel Precautions This monitor can be adjusted within the angles shown below. To turn the monitor vertically or horizontally, hold it at the bottom Warning on power connections with both hands. • Use the supplied power cord. If you use a different power cord, GDM-F400T9 be sure that it is compatible with your local power supply. For the customers in the UK If you use the monitor in the UK, be sure to use the supplied UK 90° power cable. 12° Example of plug types 90° 5° for 10
ページ5に含まれる内容の要旨
Identifying parts and controls See the pages in parentheses for further details. GDM-F500T9 is used for illustration purposes throughout this manual. Front Rear R G B HD VD (HD15) (BNC) RESET ASC INPUT HD15 BNC MENU 1 RESET button (page 14) 9 Video input 1 connector (HD15) (page 6) This button resets the adjustments to the factory settings. This connector inputs RGB video signals (0.700 Vp-p, positive) and sync signals. 2 2 2 2 ASC (auto sizing and centering) button (page 9) This button automa
ページ6に含まれる内容の要旨
xxxx Connecting to a Macintosh or compatible computer Setup Use the supplied Macintosh adapter. Before using your monitor, check that the following accessories are included in your carton: • Power cord (1) R G B HD VD • HD15 video signal cable (1) (HD15) (BNC) • USB cable (1) • Macintosh adapter (1) • Windows Monitor Information Disk (1) • Warranty card (1) • Notes on cleaning the screen’s surface (1) • This instruction manual (1) to HD15 Step 1:Connect your monitor to your computer Macintos
ページ7に含まれる内容の要旨
Step 2:Connect the power cord Step 3:Turn on the monitor and computer With the monitor and computer switched off, first connect the power cord to the monitor, then connect it to a power outlet. First turn on the monitor, then turn on the computer. R G B HD VD (HD15) (BNC) The installation of your monitor is complete. If necessary, use the monitor’s controls to adjust the picture. to AC IN If no picture appears on your screen • Check that the monitor is correctly connected to the computer. • If
ページ8に含まれる内容の要旨
Connecting Universal Serial Bus Selecting the on-screen menu (USB) compliant peripherals language (LANG) Your monitor has one upstream and four downstream USB English, French, German, Spanish, Italian, and Japanese versions connectors. They provide a fast and easy way to connect USB of the on-screen menus are available. The default setting is compliant peripheral devices (such as keyboards, mice, printers English. and scanners) to your computer using a standardized USB cable. To use your moni
ページ9に含まれる内容の要旨
Selecting the input signal Automatically sizing and centering the picture You can connect two computers to this monitor using the HD15 and BNC connectors. To switch between the two computers, use You can easily adjust the picture to fill the screen by pressing the the INPUT button. ASC (auto sizing and centering) button. Press the INPUT button. Press the ASC button. The input signal and corresponding input indicator change each The picture automatically fills the screen. time you press this
ページ10に含まれる内容の要旨
6 SCREEN (page 13) SCREEN Select the SCREEN menu to adjust Customizing Your Monitor the picture’s quality. You can adjust TOP BOT the vertical and horizontal You can make numerous adjustments to your monitor using the 26 ADJ convergence, landing, and moire on-screen menu. cancellation effect. H CONVERGENCE Navigating the menu 7 LANG (page 8) LANGUAGE Press the joystick to display the main MENU on your screen. See Select LANG to choose the on- ENGLISH page 11 for more information on using
ページ11に含まれる内容の要旨
xxxx Using the joystick Adjusting the brightness and 1 Select the menu you want to adjust. contrast Move the joystick up, down, left, or right to highlight the desired menu. Press the joystick to select the menu item. Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu. These settings are stored in memory for all input signals. 1 Move the joystick in any direction. b The BRIGHTNESS/CONTRAST menu appears on the screen. BRIGHTNESS/CONTRAST 26 26 2 Adjust the
ページ12に含まれる内容の要旨
Adjusting the shape of the picture Adjusting the color of the picture (GEOM) (COLOR) The COLOR settings allow you to adjust the picture’s color The GEOM settings allow you to adjust the rotation and shape of temperature by changing the color level of the white color field. the picture. Colors appear reddish if the temperature is low, and bluish if the The rotation setting is stored in memory for all input signals. All temperature is high. This adjustment is useful for matching the other s
ページ13に含まれる内容の要旨
Select To Adjusting the quality of the picture turn the moire cancellation function (SCREEN) ON or OFF CANCEL MOIRE* ADJ (MOIRE ADJUST) appears The SCREEN settings allow you to adjust the quality of the in the menu when you select ON picture by controlling the convergence, moire, and landing. • If you see red or blue shadows around letters or lines, adjust the adjust the degree of moire ADJ convergence. cancellation until the moire is at a MOIRE ADJUST • If elliptical or wavy patterns
ページ14に含まれる内容の要旨
Additional settings (OPTION) Resetting the adjustments You can manually degauss (demagnetize) the monitor, change the This monitor has the following three reset methods. Use the menu position, set the power saving delay time, and lock the RESET button to reset the adjustments. controls. 1 Press the joystick. RESET The main MENU appears on the screen. 2 Move the joystick to highlight OPTION and press Resetting a single adjustment item the joystick again. Use the joystick to select the adjustme
ページ15に含まれる内容の要旨
Technical Features Troubleshooting Before contacting technical support, refer to this section. Preset and user modes If thin lines appear on your screen When the monitor receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the (damper wires) monitor’s memory to provide a high quality picture at the center of the screen. (See page i for a list of the factory preset modes.) For The lines you are experiencing on your screen are normal for t
ページ16に含まれる内容の要旨
Trouble symptoms and remedies If the problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual. Use the self-diagnosis function (page 18) if the following recommendations do not resolve the problem. Symptom Check these items No picture If the 1 (power) indicator is not lit • Check that the power cord is properly connected. • Check that the 1 (power) switch is in the “on” position. If the NO INPUT SIGNAL message • Check that the v
ページ17に含まれる内容の要旨
Symptom Check these items Picture is ghosting • Eliminate the use of video cable extensions and/or video switch boxes. • Check that all plugs are firmly seated in their sockets. Picture is not centered or sized • Press the ASC button (page 9). properly • Adjust the size (page 11) or centering (page 11). Note that some video modes do not fill the screen to the edges. Edges of the image are curved • Adjust the geometry (page 12). Wavy or elliptical pattern (moire) • Cancel the moire (page 13). is
ページ18に含まれる内容の要旨
Self-diagnosis function Specifications This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go GDM-F400T9 blank and the 1 (power) indicator will either light up green or CRT 0.22 mm aperture grille pitch flash orange. If the 1 (power) indicator is lit in orange, the 19 inches measured diagonally computer is in power saving mode. Try pressing any key on the 90-degree deflection keyboard. FD Trinitron Viewable image
ページ19に含まれる内容の要旨
Table des Matières Précautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identification des composants et des commandes . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1re étape: Raccordez le moniteur à l’ordinateur . . . . . . . . . . . . . . . 6 2e étape: Branchez le cordon d’alimentation . . . . . . . . . . . . . . . . . . 7 3e étape: Mettez le moniteur et l’ordinateur sous t
ページ20に含まれる内容の要旨
Entretien Précautions • Nettoyez l’écran à l’aide d’un chiffon doux. Si vous utilisez un produit nettoyant pour vitres, n’utilisez aucun type de produit Avertissement sur le raccordement à la source contenant une solution antistatique ou des additifs similaires d’alimentation parce que vous risquez sinon de rayer le revêtement de l’écran. • Utilisez le cordon d’alimentation fourni. Si vous utilisez un • Ne frottez pas, ne touchez pas et ne tapotez pas la surface de cordon d’alimentation dif
