ページ1に含まれる内容の要旨
IB957
® TM
Intel Arrandale /PCH
5.25” Motherboard
USER’S MANUAL
Version 1.0
ページ2に含まれる内容の要旨
Acknowledgments AMI is a registered trademark of American Megatrends Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Intel® Arrandale DC Mobile Processor are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Fintek is a registered trademark of Fintek Electronics Corporation. All other product names or trademarks are properties of their respective owners. ii IB957 User’s Manua
ページ3に含まれる内容の要旨
Table of Contents Introduction ....................................................... 1 Product Description ............................................................. 1 Checklist .............................................................................. 2 IB957 Specifications ........................................................... 3 Board Dimensions ............................................................... 4 Installations .............................................
ページ4に含まれる内容の要旨
IMPORTANT NOTE: When the system boots without the CRT being connected, there will be no image on screen when you insert the CRT/VGA cable. To show the image on screen, the hotkey must be pressed (CTRL-ALT-F1). iv IB957 User’s Manual
ページ5に含まれる内容の要旨
INTRODUCTION Introduction Product Description The IB957 5.25” Disk-Size SBC is a high performance Intel® Core™ i7-610E (2.53GHz/4MB) Processor-based IB957 5.25” Disk-Size SBC with the mobile Intel® QM57 Express Chipset. It is designed for a range of automation, industrial, and medical applications. The Intel® Core™ i7 Mobile processor has an optimized integrated graphics solution. IB957 features a low-power design that is validated with Intel® Core™ i7/i3 Mobile processors on 32
ページ6に含まれる内容の要旨
INTRODUCTION Checklist Your IB957 package should include the items listed below. • The IB957 SBC • This User’s Manual • 1 CD containing chipset drivers and flash memory utility • Serial port cable (Part # PK1HK, 30cm) • SATA cable (Part # SATA-7F, 46cm) 2 IB957 User’s Manual
ページ7に含まれる内容の要旨
INTRODUCTION IB957 Specifications ® Intel Arrandale+ECC processor CPU Supported - i7-610E (2.53GHz/4M Cache/ 2 cores/4 Threads/35W) - i3-330E (2.13GHz/3M Cache/ 2 cores/4 Threads/35W) CPU Voltage 0.700V ~ 1.5V (IMVP-6.5) System Speed Up to 3.0GHz or above CPU FSB 1066MHz FSB Cache Up to 4MB shared L3 Cache Green /APM APM1.2 CPU Tpye FcBGA1288 Chipset Intel Ibex Peak-M (PCH) Chipset PCH: 25mm x 27mm, 1071-pin FCBGA AMI BIOS, supports ACPI function BIOS Memory DDR3
ページ8に含まれる内容の要旨
INTRODUCTION [ Board Dimensions 4 IB957 User’s Manual
ページ9に含まれる内容の要旨
INTRODUCTION IB957 User’s Manual 5
ページ10に含まれる内容の要旨
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IB957 in order to set up a workable system. The topics covered are: Installing the Memory ............................................................................ 7 Setting the Jumpers ................................................................................ 8 Connectors on IB957 ........................................................................... 12 6 IB9
ページ11に含まれる内容の要旨
INSTALLATIONS Installing the Memory The IB957 board supports two DDR3 memory socket for a maximum total memory of 8GB in DDR3 w/ECC DIMM memory type. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1. Hold the DDR3 module so that the key of the DDR3 module aligned with that on the memory slot. 2. Gently push the DDR3 module in an upright position until the clips of the slot close to hold the D
ページ12に含まれる内容の要旨
INSTALLATIONS Setting the Jumpers Jumpers are used on IB957 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IB957 and their respective functions. Jumper Locations on IB957 ................................................................... 9 JP2: LCD Panel Power Selection ........................................................
ページ13に含まれる内容の要旨
INSTALLATIONS Jumper Locations on IB957 Jumpers on IB957 ............................................................................. Page JP2: LCD Panel Power Selection ........................................................ 10 JP3, JP4, JP5: RS232/422/485 (COM2) Selection .............................. 10 JBAT1: Clear CMOS Setting .............................................................. 11 IB957 User’s Manual 9
ページ14に含まれる内容の要旨
INSTALLATIONS JP2: LCD Panel Power Selection JP2 LCD Panel Power 3.3V 5V JP3, JP4, JP5: RS232/422/485 (COM2) Selection COM1 is fixed for RS-232 use only. COM2 is selectable for RS232, RS-422 and RS-485. The following table describes the jumper settings for COM2 selection. COM2 RS-232 RS-422 RS-485 Function JP3: JP3: JP3: 1-2 3-4 5-6 Jumper Setting JP4: JP4: JP4: (pin closed) 3-5 & 4-6 1-3 & 2-4 1-3 & 2-4 JP5: JP5: JP5: 3-5 & 4-6 1-3 & 2-4 1-3 & 2-4
ページ15に含まれる内容の要旨
INSTALLATIONS COM2 is jumper selectable for RS-232, RS-422 and RS-485. Pin # Signal Name RS-232 R2-422 RS-485 1 DCD TX- DATA- 2 RX TX+ DATA+ 3 TX RX+ NC 4 DTR RX- NC 5 Ground Ground Ground 6 DSR RTS- NC 7 RTS RTS+ NC 8 CTS CTS+ NC 9 RI CTS- NC 10 NC NC NC JBAT1: Clear CMOS Setting JBAT1 Setting Normal Clear CMOS IB957 User’s Manual 11
ページ16に含まれる内容の要旨
INSTALLATIONS Connectors on IB957 Connector Locations on IB957 ............................................................ 13 CN1: DC Adapter Connector ............................................................... 14 CN2: DVI-D and VGA Connector ...................................................... 14 HDMI1: HDMI Connector .................................................................. 15 CN3: USB11/12 Ports ...............................................................
ページ17に含まれる内容の要旨
INSTALLATIONS Connector Locations on IB957 IB957 User’s Manual 13
ページ18に含まれる内容の要旨
INSTALLATIONS CN1: DC Adapter Connector CN1 provides DC12V that provide system power +5,+3.3,+12V,5VSB CN2: DVI-D and VGA Connector [ Signal Name Pin # Pin # Signal Name DATA 2- 1 16 HOT PLUG DATA 2+ 2 17 DATA 0- Shield 2/4 3 18 DATA 0+ DATA 4- 4 19 SHIELD 0/5 DATA 4+ 5 20 DATA 5- DDC CLOCK 6 21 DATA 5+ DDC DATA 7 22 SHIELD CLK N.C 8 23 CLOCK - DATA 1- 9 24 CLOCK + DATA 1+ 10 C1 N.C. SHIELD 1/3 11 C2 N.C. DATA 3- 12 C3 N.C. DATA 3+ 13 C4 N.C. DDC POWER 14 C5 N.C. A GRO
ページ19に含まれる内容の要旨
INSTALLATIONS HDMI1: HDMI Connector Signal Name Pin # Pin # Signal Name DATA 2- 1 13 DATA 3+ DATA 2+ 2 14 +5V Power Shield 2/4 3 15 GROUND DATA 4- 4 16 HOT PLUG DATA 4+ 5 17 DATA 0- DDC CLOCK 6 18 DATA 0+ DDC DATA 7 19 SHIELD 0/5 N.C 8 20 DATA 5- DATA 1- 9 21 DATA 5+ DATA 1+ 10 22 SHIELD CLK SHIELD 1/3 11 23 CLOCK + DATA 3- 12 24 CLOCK - CN3: USB11/12 Ports J2: DisplayPort Connector CN4: USB6/7/8/10 Ports USB_LAN1: 10/100/1000 RJ-45 and USB9/13 Ports CN5:
ページ20に含まれる内容の要旨
INSTALLATIONS COM3_COM4: COM3, COM4 Serial Port Signal Name Pin # Pin # Signal Name DSR 2 1 DCD RTS 4 3 RXD CTS 6 5 TXD RI 8 7 DTR NA 10 9 Ground DSR 12 11 DCD RTS 14 13 RXD CTS 16 15 TXD RI 18 17 DTR NA 20 19 Ground SYS_FAN1: System Fan Power Connector This is a 3-pin header for system fans. The fan must be a 12V (500mA). Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection CPU_FAN1: CPU Fan Power Connector This is a 3-pin header for the CPU fan. The fan must
