ページ1に含まれる内容の要旨
P4PE-X/TE
User Guide
Motherboard
ページ2に含まれる内容の要旨
Checklist E1474 Revised Edition V2a November 2003 Copyright © 2003 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be
ページ3に含まれる内容の要旨
Contents Notices ............................................................................................v Safety information .......................................................................... vi About this guide ............................................................................. vii Conventions used in this guide ............................................ vii Where to find more information ............................................ vii ASUS contact information ........
ページ4に含まれる内容の要旨
Safeguards Contents 2.1.3 Recovering the BIOS with CrashFree BIOS 2 ....... 2-7 2.1.4 BIOS beep codes ................................................... 2-8 2.2 BIOS Setup program .......................................................... 2-9 2.2.1 BIOS menu bar ...................................................... 2-9 2.2.2 Legend bar ........................................................... 2-10 2.3 Main Menu.........................................................................2-11 2.3.
ページ5に含まれる内容の要旨
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reas
ページ6に含まれる内容の要旨
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power cabl
ページ7に含まれる内容の要旨
About this guide Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task. Where to find more information
ページ8に含まれる内容の要旨
ASUS contact information ASUSTeK COMPUTER INC. (Asia-Pacific) Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 General Tel: +886-2-2894-3447 General Fax: +886-2-2894-3449 Web Site: www.asus.com.tw Technical Support MB/Others (Tel): +886-2-2890-7121 (English) Notebook (Tel): +886-2-2890-7122 (English) Desktop/Server (Tel): +886-2-2890-7123 (English) Support Fax: +886-2-2890-7698 ASUS COMPUTER INTERNATIONAL (America) Address: 44370 Nobel Drive, Fremont, CA 94538, USA General Fax: +1-502-933-871
ページ9に含まれる内容の要旨
P4PE-X/TE specifications summary ® ® CPU Socket 478 for Intel Pentium 4 / Celeron processors with speeds of up to 3.06+ GHz ® Intel Hyper-Threading technology ready Chipset Intel 82845PE MCH Intel 82801DB ICH4 Front Side Bus (FSB) 800*/533/400 MHz (*Overclocked mode, a CPU with 800MHz FSB requires using a PC3200 DIMM) Memory 3 x 184-pin DDR DIMM sockets for up to 2GB memory Supports PC3200*/2700/2100/1600 unbuffered non-ECC DDR DIMMs (*Overclocked mode, a PC3200 DIMM requires a CPU with 800MHz F
ページ10に含まれる内容の要旨
P4PE-X/TE specifications summary BIOS features 2Mb Flash ROM, Award BIOS, TCAV, PnP, DMI2.0, SM BIOS2.3, ASUS C.P.R., ASUS EZ Flash, ASUS CrashFree BIOS2 Industry standard PCI 2.2, USB 2.0 Manageability WfM 2.0. DMI 2.0, WOL/WOR by PME, chassis intrusion, SMBus Form Factor ATX form factor: 12 in x 9.0 in (30.5 cm x 22.9 cm) Support CD contents Device drivers ASUS PC Probe ASUS LiveUpdate Trend Micro™ PC-cillin 2002 anti-virus software (OEM version) * Specifications are subject to change without
ページ11に含まれる内容の要旨
Chapter 1 This chapter describes the features of the P4PE-X/TE motherboard. It includes brief descriptions of the motherboard components, and illustrations of the layout, jumper settings, and connectors. Product introduction
ページ12に含まれる内容の要旨
1.1 Welcome! ® Thank you for buying the ASUS P4PE-X/TE motherboard! The ASUS P4PE-X/TE motherboard delivers a host of new features and latest technologies making it another standout in the long line of ASUS quality motherboards! ® ® The motherboard incorporates the Intel Pentium 4 Processor in 478-pin package ® coupled with the Intel 845PE chipset to set a new benchmark for a cost-effective desktop platform solution. Supporting up to 2GB of system memory with PC3200*/2700/2100/1600 DDR SDRAM
ページ13に含まれる内容の要旨
DDR memory support Employing the Double Data Rate (DDR) memory technology, the P4PE-X/TE motherboard supports up to 2GB of system memory using unbuffered non-ECC PC3200*/2700/2100/1600 DDR DIMMs. Memory support depends on the CPU FSB and DDR type. See page 1-12 for the CPU and DIMM requirements. *Overclocking mode Onboard LAN solution ® The motherboard has the Realtek RTL8100C chipset onboard to support 10BASE-T/100BASE-TX networking protocol. See pages 1-4 USB 2.0 technology The motherboar
ページ14に含まれる内容の要旨
1.4 Motherboard components Before you install the motherboard, learn about its major components and available features to facilitate the installation and future upgrades. Refer to the succeeding pages for the component descriptions. 1 234 5 6 7 16 15 8 14 13 12 11 10 9 17 18 19 20 21 22 26 25 24 23 1-4 Chapter 1: Product introduction
ページ15に含まれる内容の要旨
ATX 12V connector. This power connector connects the 4-pin 12V plug from 1 the ATX 12V power supply. 2 CPU socket. A 478-pin surface mount, Zero Insertion Force (ZIF) socket for ® ® the Intel Pentium 4 Processor, with 800/533/400 MHz system bus that allows 6.4GB/s, 4.3GB/s, and 3.2GB/s data transfer rates, respectively. ® 3 North bridge controller. The Intel 845PE Memory Controller Hub (MCH) provides the processor interface with 533/400 MHz frequency, system memory interface at 333/266MHz operat
ページ16に含まれる内容の要旨
Audio CODEC. The ADI AD1888 is an AC’97 CODEC that allows 14 6-channel audio playback. The audio CODEC provides six DAC channels for 5.1 surround sound, S/PDIF output, AUX and Line In stereo inputs, integrated headphone amplifier, greater than 90dB dynamic range, and stereo Mic PREAMP support. ® 15 LAN controller. The Realtek RTC8100C controller supports 10BASE-T/ 100BASE-TX networking. 16 AGP slot. This Accelerated Graphics Port (AGP) slot supports 1.5V AGP4X mode graphics cards for 3D graphica
ページ17に含まれる内容の要旨
1.5 Motherboard layout 22.86cm (9.0in) PS/2KBMS T: Mouse KBPWR1 B: Keyboard USBPW12 CPU_FAN1 Socket 478 USB2.0 T: USB2 B: USB1 COM1 COM2 Intel 845PE Memory USBPW34 USB2.0 Controller USBPW56 Top: ATX12V1 T:USB3 RJ-45 Hub (MCH) B:USB4 Top:Line In Center:Line Out Below:Mic In 0 1 2 3 4 5 Accelerated Graphics Port (AGP) ® PCI1 Intel I/O CR2032 3V Controller Lithium Cell P4PE-X/TE CMOS Power Hub (ICH4) PCI2 CLRTC PCI3 AD1888 SPDIF1 PCI4 ASUS ASIC AUX1 with CD1 Hardware Monitor PCI5 SB_PWR1 2
ページ18に含まれる内容の要旨
1.6 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. 2. Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. 3. Hold components by the edges to avoid touching the ICs on them. 4. Whenever you unins
ページ19に含まれる内容の要旨
1.7 Motherboard installation Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. The motherboard uses the ATX form factor that measures 12 inches x 9 inches (30.5 cm x 22.9 cm). Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause you physical injury and damage motherboard components. 1.7.1 Placement direction When installing the motherboard, make sure that you place it i
ページ20に含まれる内容の要旨
1.8 Central Processing Unit (CPU) 1.8.1 Overview The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) ® ® socket. The socket is designed for the Intel Pentium 4 Processor in the 478-pin package with 512KB L2 cache on 0.13 micron process. This processor supports 800*/533/400MHz front side bus (FSB), and allows data transfer rates of 6.4GB/s, 4.2GB/s, and 3.2GB/s, respectively. (*Overclocking mode) If you installed a CPU with 800MHz FSB, you need to use a PC3200 (400MHz) D
