ページ1に含まれる内容の要旨
B85-PLUS
Motherboard
ページ2に含まれる内容の要旨
E7928 First Edition V1 April 2013 Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if:
ページ3に含まれる内容の要旨
Contents Safety information ...................................................................................... iv About this guide ......................................................................................... iv Package contents ....................................................................................... vi B85-PLUS specifications summary .......................................................... vi Chapter 1: Product introduction 1.1 Before you proceed ...............
ページ4に含まれる内容の要旨
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power
ページ5に含まれる内容の要旨
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. 2. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package. Conventions used in this
ページ6に含まれる内容の要旨
Package contents Check your motherboard package for the following items. Motherboard ASUS B85-PLUS motherboard Cables 2 x Serial ATA 6.0 Gb/s cables Accessories 1 x I/O Shield Application DVD Support DVD Documentation User Guide If any of the above items is damaged or missing, contact your retailer. B85-PLUS specifications summary ® ® CPU LGA1150 socket for Intel 4th Generation Core™ i7 / i5 / i3, Pentium , and ® Celeron processors ® Supports Intel 22nm CPU ® Supports Intel Turbo Boost Technolo
ページ7に含まれる内容の要旨
B85-PLUS specifications summary ® Storage Intel B85 Express Chipset: - 2 x Serial ATA 3.0 Gb/s connectors (dark brown) - 4 x Serial ATA 6.0 Gb/s connector (yellow) ® ® Supports Intel Rapid Start Technology, Intel Smart Connect Technology* * These functions will work depending on the CPU installed. ® LAN Realtek 8111G Gigabit LAN controller ® USB Intel B85 Express Chipset - supports ASUS USB 3.0 Boost 2 x USB 3.0/2.0 ports at midboard for front panel support 2 x USB 3.0/2.0 ports at rear panel
ページ8に含まれる内容の要旨
B85-PLUS specifications summary Back Panel I/O 1 x PS/2 keyboard port (purple) ports 1 x PS/2 mouse port (green) 1 x DVI-D port 1 x RGB port 1 x LAN (RJ-45) port 4 x USB 2.0/1.1 ports 2 x USB 3.0/2.0 ports 3 x Audio jacks support 8-channel audio output Internal 1 x USB 3.0 connector supports additional 2 USB 3.0 ports connectors 2 x USB 2.0 connectors support additional 4 USB 2.0 ports 2 x SATA 3.0 Gb/s connectors (dark brown) 4 x SATA 6.0 Gb/s connector (yellow) 1 x 4-pin CPU fan connector 2 x
ページ9に含まれる内容の要旨
Product introduction 1 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them. •
ページ10に含まれる内容の要旨
LGA1150 Place this side towards the rear of the chassis B85-PLUS 1.2.3 Motherboard layout 1 2 3 4 3 5 20.8cm(8.2in) CPU_FAN KBMS DIGI +VRM EATX12V CHA_FAN2 3 USB910 2 USB3_56 LAN_USB34 BATTERY AUDIO CHA_FAN1 COM 6 PCIEX1_1 B85-PLUS RTL 8111G PCIEX16_1 7 PCIEX1_2 ® Super Intel I/O B85 PCI1 8 SB_PWR PCIEX16_2 ASM 9 1083 PCI2 128Mb BIOS CLRTC Realtek ALC887 10 SATA_6 SATA_5 PCI3 SPDIF_OUT USB1112 USB1314 6 PANEL SATA6G_4 SATA6G_3 AAFP 14 13 12 11 1-2 Chapter 1: Product introduction DVI_VGA DDR3 D
ページ11に含まれる内容の要旨
1.2.4 Layout contents Connectors/Jumpers/Slots/LED Page 1. Serial port connectors (10-1 pin COM) 1-13 2. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 1-14 3. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2) 1-16 ® 4. Intel LGA1150 CPU socket 1-3 5. DDR3 DIMM slots 1-7 ® 6. Intel B85 Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~4 [yellow]) 1-17 7. USB 3.0 connector (20-1 pin USB3_12) 1-16 8. Onboard LED (SB_PWR) 1-19 9. Clear RTC RAM (3-pin CLRTC) ) 1-10 ® 10. Intel B85 Se
ページ12に含まれる内容の要旨
Unplug all power cables before installing the CPU. • Ensure that you install the correct CPU designed for the LGA1150 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the
ページ13に含まれる内容の要旨
4 C 5 A B 1.3.2 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. ASUS B85-PLUS 1-5
ページ14に含まれる内容の要旨
To install the CPU heatsink and fan assembly A 1 2 B B A 3 4 To uninstall the CPU heatsink and fan assembly 2 1 A B B A 1-6 Chapter 1: Product introduction
ページ15に含まれる内容の要旨
1.4 System memory 1.4.1 Overview This motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Module (DIMM) sockets. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. ® According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU. Channel Sockets Channel A DIMM_A1 & DIMM_A2 Channel B DIMM_B1 & DIMM_B2 B85-PLUS B85-PLUS 240-pin DDR3 DIMM sockets 1.4.2 Memory configurations You
ページ16に含まれる内容の要旨
• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs). • Visit the ASUS website at: www.asus.com for the latest QVL. 1.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the m
ページ17に含まれる内容の要旨
Support the DIMM lightly with 2 your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out 1 with extra force. 1 DIMM notch 2. Remove the DIMM from the socket. 1.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard
ページ18に含まれる内容の要旨
1.5.3 PCI slots The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. 1.5.3 PCI Express 2.0 x1 slots This motherboard supports PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications. 1.5.4 PCI Express x16 slots This motherboard supports PCI Express x16 network cards, SCSI cards, and other cards that comply with the PCI Express specifications. IRQ assignments for this motherb
ページ19に含まれる内容の要旨
B85-PLUS CLRTC 1 2 2 3 Normal Clear RTC (Default) B85-PLUS Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5-10 seconds, then move the cap back to pins 1-2. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to re- enter data. Except when clearing the RTC RAM, never remove the cap on CLRTC jum
ページ20に含まれる内容の要旨
1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. 3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. LAN port LED indications Activity Link Speed LED LED Activity/Link LED Speed LED Status Description Status Description Off No link OFF 10Mbps connection Orange Linked ORANGE 100Mbps connection LAN port Orange Data acti
