ページ1に含まれる内容の要旨
7ZX-1
TM TM
AMD Athlon /Duron Socket A Motherboard
USER'S MANUAL
TM TM
AMD Athlon /Duron Socket A Processor Motherboard
REV. 1.01 First Edition
R-101-01-001211
ページ2に含まれる内容の要旨
FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class B DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential Responsible Party Name: G.B.T. INC. installations. This equipment generates, uses, and can radiate radio frequency Address: 18305 Valley Blvd., Suite#A LA Puent,
ページ3に含まれる内容の要旨
Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-7ZX is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused of rad
ページ4に含まれる内容の要旨
Table Of Content SUMMARY OF FEATURES................................................................................................................................ 2 7ZX-1 MOTHERBOARD LAYOUT................................................................................................................... 3 CPU SPEED SETUP ............................................................................................................................................. 4 CONNECTORS.....................
ページ5に含まれる内容の要旨
PNP/PCI CONFIGURATIONS............................................................................................................................... 30 LOAD BIOS DEFAULTS...................................................................................................................................... 31 LOAD SETUP DEFAULTS..................................................................................................................................... 32 INTEGRATED PERIPHERALS.............
ページ6に含まれる内容の要旨
7ZX-1 Motherboard Revision History Revision Revision Note Date 1.01 Initial release of the 7ZX-1 motherboard Dec.2000 user’s manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. DEC. 11, 2000 TAIPEI, TAIWAN, R.O.C 1
ページ7に含まれる内容の要旨
7ZX-1 Motherboard Summary Of Features Form Factor 30.5 cm x 22.8 cm ATX size form factor, 4 layers PCB. TM TM CPU AMD Athlon /Duron (K7) Socket A Processor 256K/64K L2 cache on die Supports 500MHz ~ 1GHz and faster Chipset Apollo KT133 ,consisting of: VT8363 Memory/AGP/PCI Controller(PAC) VT82C686A PCI Super-I/O Integrated Peripheral Controller (PSIPC) Clock Generator ICS 9248-141 or ICW W230H Memory 3 168-pin DIMM sockets Supports PC-100 / PC-133 SDRAM Supports up to 1.
ページ8に含まれる内容の要旨
7ZX-1 Motherboard 7ZX-1 Motherboard Layout JP4 PS/2 J3 Socket A CPU JP6 JP8 LED1 JP7 VT8363 7ZX-1 AGP 1 SW1 Clock PCI1 Generator PCI2 BAT1 VT82C 686A J13 PCI3 JP3 J12 PCI4 J2 PCI5 BIOS USB2 JP16 AMR J4 JP17 JP9 JP18 J11 BZ1 3 USB1 COM B COM A GAME & AUDIO LPT AD1881 J18 J15 DIMM1 DIMM2 DIMM3 ATX POWER IDE1 IDE2 JP10 FLOPPY JP11
ページ9に含まれる内容の要旨
7ZX-1 Motherboard CPU Speed Setup The system bus speed is selectable at 100~133MHz. The user can select the system bus speed by DIP switch SW1. Set System Bus Speed If your clock generator (in Motherboard) is ICS 9248-141. You can follow the below reference. SW1: (ICS 9248-141) O : ON, X : OFF FSB 1 2 3 4 95 O O X O 9248-141 ICS 100 X O X X 105 X O O X 110 O
ページ10に含まれる内容の要旨
Connectors Connectors Game & Audio Port Game Port Line Out 1 MIC In Line In COM A / COM B / LPT Port LPT Port COM A COM B USB 1 Connector Pin No. Definition 4 1 2 3 1 USB V0 2 USB D0- 3 USB D0+ 4 GND 5 USB V1 5 6 7 8 6 USB D1- 7 USB D1+ 8 GND 5
ページ11に含まれる内容の要旨
Connectors USB 2 Connector Pin No. Definition 1 +5V 2 10 2 GND 3 USB D2- 1 9 4 NC 5 USB D2+ 6 USB D3+ 7 NC 8 USB D3- 9 GND 10 +5V PS/2 Keyboard & PS/2 Mouse Connector PS/2 PS/2 Mouse Mouse/Keyboard Pin No. Definition 1 Data 6 5 2 NC 4 3 3 GND 4 VCC(+5V) 2 1 5 Clock PS/2 Keyboard 6 NC J3: CPU Fan 1 Pin No. Definition 1 Control 2 +12V 3 SENSE 6
ページ12に含まれる内容の要旨
7ZX-1 Motherboard JP6: Power Fan 1 Pin No. Definition 1 Control 2 +12V 3 NC J2: Sysem Fan 1 Pin No. Definition 1 Control 2 +12V 3 SENSE ATX Power Pin No. Definition 3,5,7,13, GND 10 20 15-17 1,2,11 3.3V 4,6,19,20 VCC 10 +12V 12 -12V 18 -5V 8 Power Good 1 11 9 5V SB stand by+5V 14 PS-ON(Soft On/Off) 7
ページ13に含まれる内容の要旨
Connectors Floppy Port Red Line FDD1 IDE1(Primary), IDE2(Secondary) Port Red Line IDE 1 IDE 2 J15: AUX_IN 1 Pin No. Definition 1 AUX-L 2 GND 3 GND 4 AUX-R 8
ページ14に含まれる内容の要旨
7ZX-1 Motherboard J18: CD Audio Line In 1 Pin No. Definition 1 CD-L 2 GND 3 GND 4 CD-R J13: Ring Power On (Internal Modem Card Wake Up) 1 Pin No. Definition 1 Signal 2 GND J12: Wake On LAN 1 Pin No. Definition 1 +5V SB 2 GND 3 Signal 9
ページ15に含まれる内容の要旨
Connectors JP8 / LED1: STR LED Connector & DIMM LED STR LED Connector External. 1 + DIMM LED J4: IR 1 Pin No. Definition 1 VCC (+5V) 2 NC 3 IR Data Input 4 GND 5 IR Data Output 10
ページ16に含まれる内容の要旨
7ZX-1 Motherboard Panel And Jumper Definition J11: 2x11 Pins Jumper GN S P K HD RE GD 1 1 1 1 PW P−P−P+ GN (Green Switch) Open: Normal Operation Not available at the case Close: Entering Green Mode GD (Green LED) Pin 1: LED anode(+) Pin 2: LED cathode(−) HD (IDE Hard Disk Active Pin 1: LED anode(+) LED) Pin 2: LED cathode(−) SPK (Speaker Connector) Pin 1: VCC(+) For external speaker in the case Pin 2- Pin 3: NC Pin 4: Data(−) RE (Reset Switch) Open: Normal Operation Close: Reset Hardware
ページ17に含まれる内容の要旨
Panel and Jumper Definition JP4: Rear USB Device Wake up Selection (USB Connector USB1) 1 Pin No. Definition 1-2 Close Normal (Default) 2-3 Close USB Device Wake up (If you want to use "USB Dev Wakeup From S3-S5" function, you have to set the BIOS setting "USB Dev Wakeup From S3-S5" enabled, and the jumper "JP4" enabled). *(Power on the computer and as soon as memory counting starts, press . You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP", then USB1 s
ページ18に含まれる内容の要旨
7ZX-1 Motherboard JP11: Front USB Device Wake up Selection (USB Port USB2) 1 USB2 Pin No. Definition 1-2 close Normal (Default) Enabled Front USB Device 2-3 close Wake up (If you want to use "USB Dev Wakeup From S3-S5" function, you have to set the BIOS setting "USB Dev Wakeup From S3-S5" enabled, and the jumper "JP11" enabled). *(Power on the computer and as soon as memory counting starts, press . You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP", t
ページ19に含まれる内容の要旨
Panel and Jumper Definition BAT1: Battery + CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. 14
ページ20に含まれる内容の要旨
Performance List Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) TM TM • CPU AMD Thunderbird 950MHz, AMD Duron 700MHz • DRAM (256x1) MB SDRAM (HYUNDAI HYM71V733201) • CACHE SIZE 256 KB included in Thunderb
