ページ1に含まれる内容の要旨
Itona TC4xyy
Hardware User’s Guide
VXL Instruments Ltd,
NO.17, House of Excellence,
Electronics City,
Hosur Road,
Bangalore – 560 100, INDIA
www.vxl.net
1
ページ2に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide Copyright and Trademark notices ALL RIGHTS RESERVED. Information in this document is subject to change without notice and does not represent a commitment on the part of the manufacturer. No part of this guide may be reproduced or transmitted in any form or means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of the manufacturer. Every effort has been made t
ページ3に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide Federal Communication Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
ページ4に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide Preface Thank you for purchasing the Itona TC4xyy Series Thin Client. This guide contains information to setup and use the hardware of Itona TC4xyy Series. The guide consists of the following chapters: • Introduction: provides an overview of the product. • Installation: contains the procedure to setup the hardware. • Specifications: provides hardware, mechanical, electrical, interface and operating environment specifications. • Con
ページ5に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide Table of Contents Introduction ........................................................................................................................................6 Overview........................................................................................................................................................6 Features ...................................................................................................
ページ6に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide Introduction Overview Thin Clients are essentially terminal devices that connect to multi-user application servers operating under Citrix MetaFrame and Windows 2000/ 2003 operating systems. This guide covers installation and hardware details of Itona TC4xyy Series. Itona TC4xyy Itona TC4xyy
ページ7に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide Features The product is equipped with a 10/100 Ethernet port that gives an instant connection to a multi-user Windows NT application server. Also provided are serial, parallel and video display ports. USB and PS/2 compatible keyboard/Mouse ports are available for quick setup and use. Optional Features • Smart Card reader • Wireless LAN Note: The optional features cannot be upgraded in the field. Please contact the reselle
ページ8に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide Installation This chapter describes hardware installation of the product. Step One: Unpack Unpack the unit taking care not to drop the product whilst removing from the packaging. The carton in which the product was shipped to you contains the following: • Itona TC4xyy Series Thin Client • Pedestal Set • Power Cord ( Optional ) • Mouse (Optional ) • Hardware Installation Guide When you open the carton, if you find any d
ページ9に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide Step Three: Connect accessories and power NOTE: BEFORE CONNECTING ANY CABLES, ENSURE POWER CABLE IS UNPLUGED FROM THE UNIT. PLEASE USE 6A (MIN) / 250V AC 0.75 sq mm, H05VV-F CERTIFIED POWER CORD. Pictures below show the various connectors available on the rear panel of the client. AUDIO LINE OUT MIC AUDIO LINE IN EHTERNET PORT 2 – USB PORT
ページ10に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide The table below identifies the devices to be used with each connector of the client. Instructions to connect various accessories Connector Symbol Connect the video cable from your display unit to the video port Connect USB devices to the USB ports Connect external powered speakers to the audio output(LINE OUT) port Connect an external audio device to the Microphone( LINE IN) input port Connect
ページ11に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4XYY Hardware User’s Guide Step Four: Connect to the Server The Thin Client can be physically connected to the server/network in three ways: • LAN connection through TCP/IP • Direct connection through RS232 • Dial-in remote connection through a modem LAN connection through TCP/IP Connect one end of a 10/100 cable to the LAN port of the client. Connect the other end to a LAN hub as shown in the figure below. LAN Connection through TCP/IP Workstation
ページ12に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4XYY Hardware User’s Guide Direct Connection through RS232 Connect one end of an RS232 cross cable to a serial port of the client. Connect the other end to a serial port of the server as shown in the figure below. Winlinx Thin Client COM COM PORT PORT Server RS232C CROSS Direct Connection through RS232 Dial-In Remote Connection through a Modem Connect one end of an RS232 straight cable to a serial port of the client. Connect the other e
ページ13に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4XYY Hardware User’s Guide Specifications Hardware • Processor: VIA C7 ™ nanoBGA2 1GHz • VGA Memory: Shared Video Memory 64MB max • Flash : IDE 40 pin • RAM: 128MB ~ 1GB DDRII 400/533MHz • Smart Card reader (optional) • Slim HDD ( optional ) • Wireless LAN ( optional ) Mechanical Itona TC4xyy Itona TC4xyy
ページ14に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4XYY Hardware User’s Guide Connectors and Cables Connectors The following tables provide pin details for various connectors on the rear panel of the client. COM Port 9-pin D-type male connector. RS232C compatible, operating at 115.2K baud maximum Pin Signal Description 1 5 1 DCD Data Carrier Detect 2 RxD Receive Data 3 TxD Transmit Data 4 DTR Data Terminal 6 9 Ready 5 GND Signal Ground 6 DSR Data Set Ready 7
ページ15に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4XYY Hardware User’s Guide 10/100 LAN Port RJ-45 modular 8-pin jack. 10/100 Mbps 1 8 Pin Signal 1 TxD+ 2 TxD- 3 RxD+ 6 RxD- Video Port 15-pin D-type female connector 5 1 Pin Signal Pin Signal Pin Signal 1 Red 6 Red return GND 11 No Connection 2 Green 7 Green return GND 12 No Connection 10 6 3 Blue 8 Blue return GND 13 Horizontal Sync 4 No Connection 9 No Connection 14 Vertical Sync 5 GND 10 No Connection 15 No Con
ページ16に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4XYY Hardware User’s Guide Cables 10/100 LAN Cable Cross Connection - (Without Hub) RJ45 RJ45 Pin Pin TXD+ 1 3 RXD+ TXD- 2 6 RXD- 1 TXD+ RXD+ 3 RXD- 6 2 TXD- Straight Connection - (With Hub) RJ45 RJ45 Pin Pin TXD+ 1 1 TXD+ TXD- 2 2 TXD- 3 RXD+ RXD+ 3 RXD- 6 6 RXD- COM Port (Serial Port) Cables Serial devices like modems and printers use 25 pin D-type connectors for RS232 connections. In order to connect an RS232 device with a 25-pin con
ページ17に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4XYY Hardware User’s Guide 9-pin to 25-pin Straight Connection 9 Pin 25 Pin Connector Connector (Thin Client) RTS 7 4 RTS DTR 4 20 DTR TXD 3 2 TXD GND 5 7 GND DCD 1 8 DCD RXD 2 3 RXD DSR 6 6 DSR CTS 8 5 CTS Printer Cable The following table shows the pin connections of the Standard Centronics parallel cable. Some manufacturers change pin functions or polarity on their printers. For such printers, custom cables may be necessary. Refer to your printer manu
ページ18に含まれる内容の要旨
VXL Instruments Ltd. Itona TC4XYY Hardware User’s Guide Troubleshooting This chapter contains solutions for problems you may encounter while using the product. Problem Solution Ensure that the power cord is plugged into an AC outlet. • The Power-LED on front panel does not glow when Check the fuse in the power-plug, if available. the client is switched on. Ensure that the video cable is properly connected. • There is no display, though the power-indicating LED glows. • The
