ページ1に含まれる内容の要旨
PCI Expansion Bay
PEX2PCI4
ページ2に含まれる内容の要旨
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no g
ページ3に含まれる内容の要旨
Instruction Manual Instruction Manual Table of Contents Introduction ................................................................................... 1 Features ......................................................................................1 Package Contents .......................................................................1 Installation ...................................................................................... 2 Using the PCI Express Adapter (typical) ..............
ページ4に含まれる内容の要旨
Instruction Manual Introduction Thank you for purchasing a StarTech.com PCI Express to Four Slot PCI Expansion Bay. This product allows you to add PCI expandability to your computer, using an available PCI Express or ExpressCard* slot, helping to bridge the gap between older PCI expansion cards and motherboards with newer interface capabilities. Features • Supports 1x 2.5Gb/s PCI Express Data Transfer Rates • IPCI Slots are fully PCI Bus Rev. 2.3 Compliant • Supports both 5V and 3.3V Ad
ページ5に含まれる内容の要旨
Instruction Manual Installation WARNING: PEX2PCI4 uses a DVI interface to connect the the PCI Express and PCI components. When connecting the PCI expansion board to the PCI Express card, please ensure that the DVI port provided by PEX2PCI4 is not confused with a DVI port provided by the computer video card, as this could damage the video card, as well as the PCI Express expansion card and PCI expansion slot board. Using the PCI Express Adapter (typical) The following diagram is a visual
ページ6に含まれる内容の要旨
Instruction Manual 1. Turn OFF the computer power before installation, and remove the chassis cover from the computer. Similarly, ensure the PEX2PCI4 is not powered at this time. Since both the PC system and the Expansion Box are self-powered, you need to follow the correct ON/OFF sequence as follows: Power Off Sequence: Power off your PC system, then the Expansion Box Power On Sequence: Power on the Expansion Box first, then power on your PC
ページ7に含まれる内容の要旨
Instruction Manual 9. Turn on the Expansion Box power using the power switch next to the Expansion Cable, then power on the PC system. 10. Once the Expansion Box has successfully been connected to the host computer, proceed to the section titled Software Installation. Using the ExpressCard Host Adapter Card The following diagram is a visual depiction of the instructions on the following page, which account for installation of the PEX2PCI4 using the (accessory) EC2PCI ExpressCard Adapt
ページ8に含まれる内容の要旨
Instruction Manual the correct ON/OFF sequence as follows: Power Off Sequence: Power off your PC system, then the Expansion Box Power On Sequence: Power on the Expansion Box first, then power on your PC system. 2. Open the top cover of the PEX2PCI4 Expansion Box by removing the screws. There are four PCI slots in the Expansion Box. Find an unused slot, remove the “blank” PCI card bracket that was pre-installed from the factory. Inser
ページ9に含まれる内容の要旨
Instruction Manual please install the ExpressBooster software supplied with your card. 1. Locate the Setup.exe file found on the driver CD. Assuming that E: is the designation for your CD/DVD-ROM drive, double-click on E:\Utility\ ExpressBooster to launch the setup program. 2. Follow the setup on-screen instructions; ensure that there is a checkmark next to PCI Express Card for Desktops/Servers only (leave the “ExpressCard” item un-checked). Proceed with any further on- screen
ページ10に含まれる内容の要旨
Instruction Manual Specifica tions Bus Type PCI Connectors PCI Expansion Box: 1 x DVI D (dual link) Female Connector PCI Express Card: 1 x DVI D (dual link) female connector Form Factor PCI Express (x1) Power Adapter 1 x 12V DC, 3 Amp OS Support Windows 2000/2003/XP/ Vista Regulatory Certifications CE, FCC, ROHS EC2PCI (optional) Bus Type ExpressCard Connectors 1x DVI D Male Connector 1x ExpressCard Connector OS Support Windows 2000/XP/2003/Vista/ Mac OS X and up Regulatory Certifications CE,
ページ11に含まれる内容の要旨
Instruction Manual Accessory Products from StarTech.com Contact your local StarTech.com dealer or visit www.startech.com for cables or other accessories that will help you get the best performance out of your new product. EC2PCI - ExpressCard Connection Cable For PEX2PCI4 PEX2EC - PCI-Express to ExpressCard Adapter 8
ページ12に含まれる内容の要旨
Instruction Manual Technical Support StarTech.com’s lifetime technical support is an integral part of our commit- ment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one-year warranty. In addition, StarTech. com warrants its products against defects in materials and workman- ship for the periods n
ページ13に含まれる内容の要旨
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Serv- er Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.com today for co
