ページ1に含まれる内容の要旨
SY-7VCA
Motherboard
Quick Start Guide
The SOYO CD Introduction
Quick BIOS Hardware
Setup Installation
ページ2に含まれる内容の要旨
SOYO ™ SY-7VCA Motherboard y * These specifications are subject to amend without notice 2 7VCA Serial - Version 1.3 - Edition: September 2000 "http://www.soyo.com.tw". on the Internet. The address is Web Site For further information, please visit our is subject to amend without notice. to the correctness of the contents there is no guarantee given. The information in this document has been carefully checked for reliability; however, the Motherboard. Information in this guide This Quick Start
ページ3に含まれる内容の要旨
SY-7VCA Quick Start Guide 1 Introduction 1 Congratulations on your purchase of the SY-7VCA Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-7VCA Motherboard Uses ’ Guide that came with your Motherboard. Unpacking When unpacking the Motherboard, check for the following items: u The SY-7VCA VT82C69
ページ4に含まれる内容の要旨
SY-7VCA Quick Start Guide SY-7VCA Motherboard Layout B e Connector Connector 1 0 T ATX Power COM1 1 3 N SDRAM COM2 ® X GAME SDRAM T N 11 N IDE 1 IDE 2 3 2 1 M M M M M M I I I AGP Slot D D D C 1 AC97 3 1 5 2 S 1 O 1 4 4 I B 3 1 ® a h 2 s VT82C686A a JP10 l F 1 3 4 D2 D8 N D1 D3 15 AMR 3V2 FDC1 1 Lithium 15 Battery 5 USB2 60 1 Power 13 Speaker LED t _ _ ++ N _ _ ++ Reset PWRBT STR HDD LED LED 4 Introduction CHAFA ISA Slo PCI Slot # (Optional) SIRCO PCI Slot # CDIN Vi CDIN PCI Slot #
ページ5に含まれる内容の要旨
SY-7VCA Quick Start Guide Key Features Ø Supports Intel® processors Ø Supports 5 sets of voltage monitoring -FSB 66MHz: Celeron™(400-700MHz) Ø Supports multiple-boot function - FSB 100MHz: Pentium® III (500E- 850MHz) Ø 5 x 32-bit bus master PCI slots - FSB 133MHz: Pentium® III (533- 933MHz) Ø 1 x 16-bit ISA slot. Ø Supports 66/100/133 MHz Front Side Ø 1 x 32-bit AGP slot Bus Frequency Ø 4 x USB ports onboard Ø Auto-detect CPU voltage (USB1: 2 Ports, USB2: 2 Ports) Ø Easy CPU settings in BIOS
ページ6に含まれる内容の要旨
SY-7VCA Quick Start Guide 2 Installation 2 To avoid damage to your Motherboard, please follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears to be loose, press carefully to seat it firmly i
ページ7に含まれる内容の要旨
SY-7VCA Quick Start Guide Install the Motherboard To perform the installation of your new SY-7VCA Motherboard, follow the steps below: CPU Installation Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover. FSB 66MHz 400MHz (66 x 6.0) 466MHz (66 x 7.0) 533MHz (66 x 8.0) 600MHz (66 x 9.0) 667MHz (66 x 10.0) 433MHz (66 x 6.5) 500MHz (66 x7.5) 566MHz (66 x 8.5) 633MHz (66 x 9.5) 700MHz (66 x 10.5) FSB 100MHz 500MHz (100 x 5.0) 6
ページ8に含まれる内容の要旨
SY-7VCA Quick Start Guide Connections to the Motherboard This section tells how to connect internal peripherals and the power supply to the Motherboard. The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (STR LED, Internal Speaker, Reset Button and IDE LED Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on connecting internal and external peripherals to your new SY-7VCA Motherboard, please ref
ページ9に含まれる内容の要旨
SY-7VCA Quick Start Guide ¡ N° ote: The STR LED is connected to the Voltage that feeds the DIMM sockets. Therefore the following table applies: Suspend to RAM Normal Operation Power Off STR LED ON ON OFF Configure Memory Your board comes with three DIMM sockets, providing support for up to 1.5GB of main memory using unbuffered and registered DIMM modules from 8MB to 512MB. On this motherboard, DRAM speed can be set independent from the CPU front side bus speed. Depending on the DRAM clock speed
ページ10に含まれる内容の要旨
SY-7VCA Quick Start Guide Debug LEDs The Debug LEDs give an indication of the status of the system during boot-up. If the system does not boot-up properly, use the table below to find out at what point in boot-up sequence the problem arises. A x means the LED is off, a L means the LED is lit. L X X X . y X X L X X X L L X L X X X L X L X L L X X L L L L X X X L X X L L X L X L X L L L L X X L L X L L L L X L L L L 10 Hardware Installation D1 D2 D3 D8 will be on and will stay on to indicate a suc
ページ11に含まれる内容の要旨
SY-7VCA Quick Start Guide 3 Quick BIOS Setup 3 This Motherboard does not require any hardware jumpers to set the CPU operating frequency. Instead, CPU settings are software configurable through the BIOS [Soyo Combo Feature]. The [Soyo Combo Feature] menu combines the main parameters that you need to configure your system. They are all in one menu to enable a quick setup in BIOS. After completion of hardware installation, turn the power switch on, then press the key while the system di
ページ12に含まれる内容の要旨
SY-7VCA Quick Start Guide 4 The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-7VCA Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Insert the SOYO CD into the CD-ROM drive The SOYO CD will auto-run, and th
ページ13に含まれる内容の要旨
SY-7VCA Quick Start Guide The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file. Follow the in
ページ14に含まれる内容の要旨
SY-7VCA Quick Start Guide driver revision: VIA 4 in 1 driver package for Win 9x/NT VIA Ac97 Codec Driver for Win 9x/NT/2000 VIA hardware monitor for (Win 95/98) Cancel OK (Driver Installation Menu) A short description of all available drivers follows: Ø The 4 in 1 driver package includes all drivers your motherboard needs. After selecting this driver package, one driver will be installed automatically (the IRQ remapping utility), the other three are installed if selected. By default all three
ページ15に含まれる内容の要旨
SY-7VCA Quick Start Guide Select which driver you want to install and click OK, or click Cancel to abort the driver installation and return to the main menu. Note: Once you have selected a driver, the system will automatically exit the SOYO CD to begin the driver installation program. When the installation is complete, most drivers require to restart your system before they can become active. Check the Latest Releases Click the 'Check the latest Releases' button to go the SOYO Website to automa
ページ16に含まれる内容の要旨
SY-7VCA Quick Start Guide Quick Trouble shoot tips ? 1. Press “ ” • • – 16 real hard, it should snap twice. You may have to unscrew card down into the socket did not get seated into the AGP slot fully and firmly. Please push your AGP card This is a common problem with AGP video cards. The reason is that your AGP card, it does not give me any video. Is my AGP slot bad? My PCI VGA card works fine with my system, but when I put in a new AGP correctly in its socket. is not seated One or more of
ページ17に含まれる内容の要旨
SY-7VCA Quick Start Guide 17 not properly recognize relatively new chipsets. install the south bridge driver from the SOYO CD, this is because Windows does has been installed correctly, then you need to If you are sure that the modem driver Why? modem to work. I have installed my modem drivers several times and I still cannot get my under integrated peripheral setup. What you need to do is to disable 'COM2' (or UART2 or serial port 2) in the bios my modem to work I get an "I/O Conflict" messag
ページ18に含まれる内容の要旨
SY-7VCA Quick Start Guide y r ’ . y w 18 http://ww .soyo.com at: Please make sure you have the latest bios and driver from the SOYO web site I can not get my board to run properl is enabled in the bios. Cyrix CPU, make sure the 'linear burst function' peripherals one by one to identify which one causes the lockup. If you are running a floppy drive controller, and see if it can boot from floppy. Then put back the the bios and exit. Next, unplug all other add-on cards except the video card and P
ページ19に含まれる内容の要旨
SY-7VCA Quick Start Guide n n . y T w , w w : s T T w y w w w w : 1 T : T 1 T T l 19 support@soyo.n : ail Em Fax: +31-79-3637575 support@soyo.co.uk E-Mail: el : +31-79-3637500 )181 569 4134 Fax: +44 (0 Technical Support: el : +44 (0)181 569 411 Technical Support: sales@soyo.nl: ail Em Fax: +31-79-3637575 sales@soyo.co.uk E-mail: el: +31-69-3637500 )181 569 4134 Fax: +44 (0 Sales el : +44 (0)181 569 411 europe.com Sales ww .soyo- , ww .soyo.nl Web Site: ww .soyo.co.uk Web Site: Germany a
ページ20に含まれる内容の要旨
SY-7VCA Quick Start Guide u w , y w w w ) T w S : T T F E - w E T T 20 support@soyo.co.jp E-mail: Fax: 81-3-33682199 81-3-33682188: el Technical Support: soyo-jpn@soyo.co.jp E-mail: Fax: 81-3-33682199 81-3-33682188: el Sales: info@soyo.co.kr -mail : ww .soyo.co.jp Web site: fax : 82-2-712-5853 tel : 82-2-717-4392 Japan Covered: Region Technical Support: SOYO Japan mail : soyo@soyo.co.kr soyo@public.bta.net.cn E-mail: ax : 82-2-704-2619 fax: 86-10-62510388 el : 82-2-716-2850 : 86-10-62510089
