ページ1に含まれる内容の要旨
SY-P4I845PEISA
SY-P4I845GEISA
Motherboard
Quick Start Guide
1
Davicom The SOYO CD Quick BIOS Hardware Introduction
USB2.0 Driver
Onboard LAN Setup Installation
Installation
Driver
ページ2に含まれる内容の要旨
SOYO™ 1. 3.3V AGP card (essentially this means all AGP 1X and AGP 2X cards) are not supported. Only 1.5V AGP cards essentially this means any card that supports AGP 4X or higher) can be used in this mainboard. 2. Please read the user guide before proceeding with your installation. Serious damage may occur if the procedure is not followed properly. 3. If you have any problem getting your system to work, please follow the troubleshooting tips on page 24 of your user guide. 4. Fo
ページ3に含まれる内容の要旨
SOYO™ SY-P4I845PEISA/P4I845GEISA Motherboard mPGA Socket 478 processors Intel 845PE/GE AGP/PCI/ISA Motherboard 533/400 MHz Front Side Bus supported ATX Form Factor Copyright © 2003 by SOYO Computer Inc. Trademarks: SOYO is a registered trademark of SOYO Computer Inc. All trademarks are properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only. The registered trademarks and copyrights
ページ4に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide 1 Introduction 1 Congratulations on your purchase of the SY-P4I845PEISA/GEISA Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-P4I845PEISA/GEISA Motherboard User's Manual that came with your Motherboard. Unpacking When unpacking the Motherboard, che
ページ5に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide SY-P4I845PEISA Motherboard Layout PS/2 KB P PS S/2 /2 M Mo ou us se e Connector Connector COM A +12V Power PRT ATX Power USB 1_2 LAN Connector 5 1 Audio out / Front out J30 62 Audio in / REAR out DDR1 DDR2 MIC IN / Center & Bass out IDE 2 IDE 1 LAN AGAME DAVICOM DM9102AE AGP Slot 3V Lithium Battery C-Media PCI Slot #1 CMI9738 JP5 CMOS Clear AUXIN1 Jumper 4411 1 CDIN1 PCI Slot #2 PCI Slot #3 FLP USB20_1 USB20_2 PCI Slot #4 10 6 10 6 1 5 SIRCON ISA Slo
ページ6に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide SY-P4I845GEISA Motherboard Layout PS/2 KB P PS S/2 /2 M Mo ou us se e Connector Connector COM A +12V Power VGA out PRT ATX Power USB 1_2 LAN Connector 5 1 Audio out / Front out J30 62 Audio in / REAR out DDR1 DDR2 MIC IN / Center & Bass out IDE 2 IDE 1 AGAME LAN DAVICOM DM9102AE AGP Slot 3V Lithium Battery C-Media PCI Slot #1 CMI9738 JP5 CMOS Clear AUXIN1 Jumper 4411 1 CDIN1 PCI Slot #2 PCI Slot #3 FLP USB20_1 USB20_2 PCI Slot #4 10 6 10 6 1 5 SIRCON ISA
ページ7に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide Key Features ® Supports Intel mPGA Socket 478 Supports multiple-boot function processors AGP 2.0 Compliant; ® - Pentium 4 AGP Connector supports: ® - 1.5V only AGP cards - Celeron - 4X data transfer Supports 533/400 MHz Front Side Bus Frequency Smart Card Reader - Compliant with Personal Computer PC99, ACPI Smart Card (PC/SC) Working Group Ultra 33/66/100 (ATA 33/66/100) standard Supports PC1600/PC2100/2700 1 x 32-bit AGP slo
ページ8に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide 2 Installation 2 To avoid damage to your Motherboard, please follow these simple rules while handling this equipment: Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. Check the Motherboard for damage. If any chip appears to be loose, press carefully
ページ9に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide Install the Motherboard We will now begin the installation process. Please follow the systematic procedure designed to lead you to a complete and correct installation. Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Connect cables, case wires, and power supply Install expansion cards Step 4- Install expansion cards Step 1. Install the CPU ® ® CPU Mount Procedure: To mount the Pentium 4 or Celeron Sock
ページ10に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide Step 2. Configure Memory P4I845PEISA/GEISA support PC2100 & PC2700, non-ECC and non-registered module. The largest memory capacity possible is 2GB. On this motherboard (PEISA/GEISA), DRAM speed can be set independent from the CPU front side bus speed. A maximum of 2 pcs. Double-sided module can be used at the same time. Memory Configuration Table Number of Memory Modules DDR1 DDR2 RAM Type DDR RAM Memory Module Size (MB) 128 / 256 / 512 MB / 1GB
ページ11に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide Connectors and Plug-ins CPU Cooling Fan: CPUFAN1 CPU Cooling Fan: CPUFAN2 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 GND +12V Sensor GND +12V NC Chassis Fan: CHAFAN1 Chassis Fan: CHAFAN2 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 GND +12V Sensor GND +12V Sensor CD-IN 1 AUXIN1 Pin1 Pin2 Pin3 Pin4 Pin1 Pin2 Pin3 Pin4 Left GND GND Right Left GND GND Right Standard IrDA (Infrared Device Header): SIRCON MIC & LED Connector: J30 Pin1 Pin2 Pin3 Pin4 Pin5 Pin1 Pin2 Pin3 Pin4 Pi
ページ12に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide ATX 12V Power Supply: ATX PW Attach the ATX 12V Power cable to three connector. (This motherboard requires an ATX 12V power supply, an AT or ATX power supply can NOT be used.) When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to provide at least 720mA on the 5V Standby lead (5VSB). PS. Power supply must be compliant to the ATX 12V specification. A new superset of the original ATX power supply is now d
ページ13に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide Step 4. Install expansion cards The motherboard has 1 AGP slot, 4 PCI slots and 3 ISA slots. 1. Read the instruction document of the related expansion card before inserting the expansion card into the computer. 2. Press the expansion card firmly into the expansion slot on the motherboard. 3. Make sure the metal contacts on the card are correctly seated in the slot. 4. Replace the screw to secure the slot bracket of the expansion card. 5. Install rel
ページ14に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide Audio Speakers connections When using 2-channel speaker, connect the speaker cable to line-out. If you’re using 4 channel speaker, connect the front L/R speakers to line-out and rear L/R speakers to Line-in. make sure to set the audio software for 4 channel speaker system. Do not forget to set the Audio Rack software to 4-channel system. If you are using 6 channel speaker, connect the front L/R speaker to line out, rear L/R speaker to line-in and c
ページ15に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide 3 Quick BIOS Setup 3 After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will be shown on the screen. Then, follow these steps to configure the CPU settings. Step 1. Select [STANDARD CMOS SETUP] Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”. Step 2. Select [LOAD OPTIMIZED DE
ページ16に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide 4 The SOYO CD 4 The SOYO-CD will Auto Run only in Windows Based Operating Systems. Your SY-P4I845PEISA/GEISA motherboard comes with a CD-ROM labeled “SOYO CD”. The SOYO CD contains a. The user’s manual for your new motherboard in PDF format, b. The driver software needed for installation, and c. A database in HTML format with information on SOYO motherboards and other products. Step 1. Insert the SOYO CD into the CD-ROM drive If you use Windo
ページ17に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide The user's manual files included on the SOYO CD are in PDF (Postscript Document Format). In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present on your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual
ページ18に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide Intel Chipset Software Installation Utility for Win 98/98SE/ME/2000/XP Intel Application Accelerator for Win 98/98SE/ME/NT/2000/XP Intel Extreme Graphics Driver for Win 98SE/ME (For P4I845GEISA only) Intel Extreme Graphics Driver for Win 2000/XP (For P4I845GEISA only) Intel Extreme Graphics Driver for Win NT4.0 (For P4I845GEISA only) Intel USB2.0 Driver for Win 98/ME Intel USB2.0 Driver for Win 2000/XP (click here for installation procedure) C-MEDIA Audio
ページ19に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide 2. The application includes the CD Player/MIDI Player/MP3/Wave Player/Mixer to control your PC’s audio functions. Davicom Onboard Lan Driver for Win 9x/ME/NT/2000/XP This setup program will install the Driver for Davicom Onboard Lan. P4I845PEISA/GEISA Hardware Monitor fir Win 9x/ME/2000/NT/XP Your motherboard comes with a hardware monitoring IC. By installing this utility Temperature, Fan speed and Voltages can be monitored. ITE SIM card reader Dr
ページ20に含まれる内容の要旨
SY-P4I845PEISA/GEISA Quick Start Guide After Windows XP installation, your device manager should look like this: For P4I845GEISA only 20 The SOYO CD
