Silicon Laboratories UNI-C8051F020の取扱説明書

ページ1に含まれる内容の要旨

Silicon Laboratories
USB DEBUG ADAPTER
Run
Stop Power
UNI-C8051F020
C8051F020 UNI PROTOTYPE BOARD USER’S GUIDE
1. Summary
The UNI Prototype Board provides easy development and debugging of applications on the C8051F020
microcontroller through use of a JTAG debug header and direct through-hole access to each pin.
2. Features
 C8051F020 MCU
 JTAG debug header
 0.1-inch center through-hole access to each pin
 Access to V and DGND for an external voltage supplier
DD
3. Hardware Setup
A USB De

ページ2に含まれる内容の要旨

UNI-C8051F020 Table 1. Adapters USB Debug Adapter EC2 Serial Adapter Pin # Description Pin # Description 1,8 Not Connected 1 3.0 to 3.6 VDC Input 2,3,9 GND (Ground) 2,3,9 GND (Ground) 4 TCK (C2D) 4 TCK (C2D) 5TMS 5TMS 6TDO 6TDO 7TDI (C2CK) 7TDI (C2CK) 10 USB Power 8,10 Not Connected 2 Rev. 0.1

ページ3に含まれる内容の要旨

UNI-C8051F020 NOTES: Rev. 0.1 3

ページ4に含まれる内容の要旨

UNI-C8051F020 CONTACT INFORMATION Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 Tel: 1+(512) 416-8500 Fax: 1+(512) 416-9669 Toll Free: 1+(877) 444-3032 Email: MCUinfo@silabs.com Internet: www.silabs.com The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice. Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting