Rosewill RC214の取扱説明書

ページ1に含まれる内容の要旨

eSATA II 1+1 PCIe Card RC214
User Manual

ページ2に含まれる内容の要旨

eSATAII 1+1 PCIe Card RC214 User Manual Important Message for User before Installing RC-214: New HD connecting to RC-214 must process “initial (F-disk)” and “format” before using. Otherwise, PC might find nothing in the system. If you want to boot from correct HD connecting to either motherboard or RC-214, please change correct HD source from CMOS “booting sequence”. Although SATA HD is a “hot

ページ3に含まれる内容の要旨

eSATAII 1+1 PCIe Card RC214 User Manual 2.1. Windows NT 4.0, Windows 2000/Server 2003/XP/VISTA Fresh OS installation Follow the instructions in this section if you are performing a new installation of Windows NT 4.0, 2000/XP, Server 2003 and you wish to boot from a device attached to the SATA port. 1. Power off the system. Insert SATA Card into an available PCI slot. Connect serial ATA cable(s) bet

ページ4に含まれる内容の要旨

eSATAII 1+1 PCIe Card RC214 User Manual For Windows NT 4.0 1. Double click on 'My Computer' icon, select 'Control Panel', click on 'SCSI Adapters' icon, 'Silicon Image SiI 3132 SATALink Controller' should displayed correctly under 'Device' and 'Driver' tab. 2. To view information about the devices attached to the controller, use the SiICfg Utility and click on the device from the list. For Windo