Renesas SH7201の取扱説明書

ページ1に含まれる内容の要旨

Renesas Starter Kit for SH7201
Quick Start



Reset switch

User LEDs

Power jack
E10A for Starter Kits Debug Module

LCD connector and module



















Application headers
Analog adjust User switches


E10A connector


1. Installation
Do not connect the E10A module until the software support has been installed.
1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does no

ページ2に含まれる内容の要旨

2. Connection 11. Connect the E10A module to the ‘E10A’ connector on the RSK using the ribbon cable. 12. Plug in the LCD module to ‘LCD’ connector on the RSK ensuring that the pin 1 designation corresponds to the marking on the RSK. 13. Connect the 5V power supply unit to the power jack on the RSK board and apply power. The green ‘Power’ LED located on the RSK will illuminate. 14. Connect the E10A module to a spare USB port on your PC. The green ‘ACT’ LED on the RSK will illuminate. The ‘Fo

ページ3に含まれる内容の要旨

First use of the E10A module 31. The ‘Please choose driver’ dialog will be shown. Click 32. The ‘Driver Details’ dialog will be shown, please select “Renesas E-Series USB Driver” as illustrated. The ‘Interface’ and ‘Channel’ items will be automatically populated. Click . 33. The Firmware setup dialog will be shown warning you not to disconnect the USB cable until the firmware download is complete. Click . 34. The firmware will be downloaded to the E10A module; this wil

ページ4に含まれる内容の要旨

6. Renesas SuperH Compiler The version of the compiler provided with this RSK is fully functional but time limited. You have 60 days to evaluate the full product before the compiler will limit the code linker to 256k bytes. Full licensed SH compiler versions are available from your Renesas supplier. 7. Support Online technical support and information is available at: www.renesas.com/renesas_starter_kits Technical Contact Details America: techsupport.rta@renesas.com Europe: tools.support.e