Renesas R8C/2Dの取扱説明書

ページ1に含まれる内容の要旨

Renesas Starter Kit for R8C/2D
Quick Start



1. Installation
Do not connect the E8a to the host PC until the software support has been installed.
1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If
the installer does not start, browse to the RSK directory from the CD root folder and double click on ‘setup.exe’.
2. The installer will ask you which language is to be used, please choose the appropriate one.
3. On the fi

ページ2に含まれる内容の要旨

2. Connection 12. Now connect the E8a to ‘E8’ connector on the CPU board using the ribbon cable, also connect the LCD module to ‘LCD’ connector on the CPU board ensuring that the pin 1 designation corresponds to the marking on the CPU board. 13. Connect the E8a module to a spare USB port. The “Found New Hardware” Wizard will appear. Please follow the steps below to install the drivers. Note that TM administrator privileges are required for a Windows 2000/XP machine. Do not use “Windows upd

ページ3に含まれる内容の要旨

30. The “Emulator Setting” dialog will be shown. Select the correct MCU group (R8C/2D) and device type (e.g. R5F212D8 for RSKR8C2D). Please note that the “Emulator mode” wizard shown here will only appear the FIRST time you connect to the target within a project. On subsequent connections the “Emulator setting” dialog will appear, please choose the same options to connect. 31. Select “Erase Flash and Connect”. 32. If the E8a is to provide power to the RSK board, set the “Power Target

ページ4に含まれる内容の要旨

6. Renesas M16C Compiler The version of the compiler provided with this RSK is fully functional but time limited. You have 60 days to evaluate the full product before the compiler will limit the code linker to 64k bytes. Full licensed M16C compiler versions are available from your Renesas supplier. 7. Support Online technical support and information is available at: www.renesas.com/renesas_starter_kits Technical Contact Details America: techsupport.rta@renesas.com Europe: tools.support.e