Renesas R0E53032ACSJC0の取扱説明書

ページ1に含まれる内容の要旨

R0E53032ACSJC0
Converter Board for Connecting R8C/32A Group 20-pin 0.65mm pitch LSSOP
User’s Manual
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, NSPACK, YSPACK, HSPACK and YS–GUIDE are
trademarks of Tokyo Eletech Corporation.




If the requirements shown in the "CAUTION" sentences are ignored,
CAUTION
the equipment may cause personal injury or damage to the products.


Renesas Tools Homepage http://www.renesas.com/tools
Rev.1.00
(1/4)
Jun. 16, 2008
REJ10J187

ページ2に含まれる内容の要旨

1. Outline The R0E53032ACSJC0 is a converter board for connecting the signals of the MCU unit R0E521300MCU00 for R8C/Tiny Series to a foot pattern for 20-pin 0.65mm pitch LSSOP of R8C/32A group. R053032ACSJC0 YSPACK20BG 2. Package Components (See Figure 1) Check to see if the R0E53032ACSJC0 package has all the following contents before using this product. YS-GUIDE (×2) NSPACK20BG (1) R0E53032ACSJC0 converter board............................ 1 pc. Figure 1 Package compone

ページ3に含まれる内容の要旨

MADE IN JAPAN Pb Free 5. Connection Procedure (See Figure 3) The procedure for connecting the R0E53032ACSJC0 is shown below. (1) Mount the NSPACK20BG on the user system. (2) Attach the YSPACK20BG on the NSPACK20BG. (3) Secure the two sides of the YSPACK20BG with the YS–GUIDEs. ● Do not use the screws included with the YSPACK20BG for fixing the YSPACK20BG. ● Do NOT use the screwdriver included with the NSPACK20BG for fixing the YS–GUIDEs. That is used only for the HSPACK20BG.

ページ4に含まれる内容の要旨

7. Precautions CAUTION Cautions to Be Taken for This Product: When connecting the YSPACK20BG, be sure to use the included YS–GUIDEs. Do NOT use the screws included with the YSPACK20BG for connecting the YSPACK20BG. IMPORTANT Notes on This Product: We cannot accept any request for repair. For purchasing the NSPACK20BG, YSPACK20BG, HSPACK20BG, contact the following: Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm For inquiries about the product or the contents