Renesas M3T-DUMMY80の取扱説明書

ページ1に含まれる内容の要旨

M3T-DUMMY80
Dummy IC for 80-pin 0.8-mm-pitch QFP
User’s Manual

Keep safety first in your circuit designs!
Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with

ページ2に含まれる内容の要旨

1. Outline (1) M3T-DUMMY80 main unit The M3T-DUMMY80 is an accessory tool product which connects the emulator probe and target system. Its dimensions are the same as those of an 80-pin 0.8-mm-pitch QFP (20 x 14 mm) IC package (80P6N-A). (2) Socket main unit (3) Socket frame 2. Package Components (See Figure 1) (1) M3T-DUMMY80 main unit x 1 For 80P6N-A For 80P6N-A, 80P6N-C (2) Socket main unit x 1 (Color: white) (Color: blue) (3) Socket frame (for 80P6N-A) x 2 (4) User’s manual

ページ3に含まれる内容の要旨

6. External Dimensions of the M3T-DUMMY80 HD Symbol Dimension: [mm] A D A 5.0 80 65 b 0.3 D 14.0 1 64 E 20.0 1 50 1 50 e 0.8 HD 18.0 HE 24.0 M 6.3 1 50 1 50 25 26 25 26 J J 2 1 24 41 Upper connector J1: AXN650585P (made by Matsushita Electric Works, Ltd.) Upper connector J2: AXN550045P 25 26 25 26 25 40 (made by Matsushita Electric Works, Ltd.) Board Material: Glass epoxy board Material: Bronze phosphide Pin Plating: Solder plating e b Material: Heat tolerant resin (body) M Upper connectors

ページ4に含まれる内容の要旨

8. Precautions CAUTION Cautions to Be Taken for This Product: Do not solder the M3T-DUMMY80 main unit directly on the target board. Be sure to use the included socket. Before mounting the M3T-DUMMY80, be sure to check the pin positions. Holder patterns are required at each of the four corners of the target foot pattern. (see Figure 4). Be sure to solder the holders of the socket. An insufficient amount of solder applied to the holders may cause a poor contact, so be careful.