Renesas M3T-64DIP-DMSの取扱説明書

ページ1に含まれる内容の要旨

M3T-64DIP-DMS
Converter Board for Connecting 64-pin RSS Type Emulator MCU to 64-pin 0.8mm pitch QFP
User’s Manual



If the requirements shown in the "CAUTION" sentences are ignored,
CAUTION
the equipment may cause personal injury or damage to the products.



Renesas Tools Homepage http://www.renesas.com/tools

Rev.2.00
Aug. 01, 2007
REJ10J0334-0200
(1/4)

ページ2に含まれる内容の要旨

1. Description M3T-64DIP-DMS is a converter board to connect the 64-pin RSS type emulator MCU to the DUMMY64 (not included). Using the DUMMY64, the M3T-64DIP-DMS converts the pin assignments M3T-64DIP-DMS main unit of an emulator MCU for the 64-pin 0.8mm pitch QFP. Figure 1 Package components of M3T-64DIP-DMS 2. Package Components (see Figure 1) : position of No. 1 pin Be sure to match the position of (1) 64DIP-DMS converter board No. 1 pin of the foot pattern and each pin. (2) 64DIP-

ページ3に含まれる内容の要旨

7. External Dimensions of M3T-64DIP-DMS E A Symbol Dimension [mm] 64DIP-DMS REV.A J1 64 A 10.0 1 31.0 B C 9.0 RESET 62.0 D E 35.0 GND M 6.3 X2 X1 32 33 MADE IN JAPAN GND J3 J2 M C RESET J1-27 RESET Xcin J1-28 R1 Xcout J1-29 Xin J1-30 R2 X2 X1 Xout J1-31 C3 C4 C1 C2 GND J1-32 GND * With a 3-pin oscillator used for X1, C1 and C2 are not mounted. Figure 3 External dimensions of M3T-64DIP-DMS (3/4) D C2 C4 R2 C1 R1 C3 B

ページ4に含まれる内容の要旨

6. Precautions IMPORTANT Notes for This Product: • We cannot accept any request for repair. • For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/tools 8. Correspondence of Connectors J1, J2 and J3 Table 2 lists the correspondence of connectors J1, J2 and J3 Table 2 Correspondence of connectors J1, J2 and J3 J1 J2, J3 J1 J2, J3 J1 J2, J3 J1 J2, J3 connector connector connector connector connector connect