ページ1に含まれる内容の要旨
M32176T-PTC
Converter Board for In-circuit Connection (for M32176FxxFP)
User's Manual
Keep safety first in your circuit designs!
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circui
ページ2に含まれる内容の要旨
: position of No. 1 pin Be sure to align No. 1 pin. 1. Outline The M32176T-PTC is a converter board for featuring the debugging function such as real-time tracing when using a Renesas M32R emulator with the M32176FxxFP. YQPACK144SD 2. Package Components M32176T-PTC (1) M32176T-PTC converter board NQPACK144SD (2) YQPACK144SD (made by Tokyo Eletech Corporation) (3) NQPACK144SD (made by Tokyo Eletech Corporation) (4) YQ-GUIDE's (4 pieces) YQ-GUIDE's (x4) (5) Screwdriver (made by Tokyo Eletech C
ページ3に含まれる内容の要旨
5. Connection Procedure Interface cables of the pod probe The procedure for connecting the M32176T-PTC is shown below. (5) (1) Mount the NQPACK144SD. (4) Clock select switch (2) Mount the YQPACK144SD on the NQPACK144SD. (3) Secure the four corners of the YQPACK144SD with the YQ-GUIDE's. (4) Set the clock select switch. M32176T-PTC For details, refer to "6. Selecting a Clock" shown below. (5) Connect the probe of the emulation pod and the M32176T- (6) PTC via the SDI MCU control interface cable a
ページ4に含まれる内容の要旨
7. External Dimensions and a Sample Foot Pattern of the M32176T-PTC 23.0 19.0 0.25 16 55.0 (for SL) ø3.2 10MHz SOCKET Hole for soldering NQ 3-ø 1.0 7.0 0.5 Unit: mm : No. 1 pin Figure 5 External dimensions and a sample foot pattern of the M32176T-PTC ( 4 / 5 ) 55.0 18.3 27.5 7.0 19.0 23.0 SW1 CN2 CN1 X2 M32176T-PTC REV. A MADE IN JAPAN
ページ5に含まれる内容の要旨
8. Precautions CAUTION Cautions to Be Taken for Emulator: • For debugging, use this product in the combination with the M32100T2-SDI-E, M32170T-SDI, M32100T-SDI-E or M32100T3-SDI-E emulator. •When starting up an emulator debugger (M3T-PD32R or M3T-PD32RM), select an MCU file according to the type name and the operation mode of the MCU to be debugged. For details on the MCU file to be selected, refer to the emulator debugger's release notes. • Connect the both cables for connecting the emulator,
