Renesas H8/38347の取扱説明書

ページ1に含まれる内容の要旨

Renesas Starter Kit for H8/38347
Quick Start



1. Installation
Do not connect the E8a module until the software support has been installed.

1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If
the installer does not start, browse to the RSK directory from the CD root folder and double click on ‘setup.exe’.
2. The installer will ask you which language is to be used, please choose the appropriate one.
3. On the first

ページ2に含まれる内容の要旨

2. Connection 11. Fit the LCD module to J10 on the RSK, so it lies above J3. Ensure all the pins of the connector are correctly inserted in the socket. 12. Now connect the E8a to J6/E8 on the RSK using the ribbon cable, also connect the LCD module to J10 on the RSK ensuring that the pin 1 designation corresponds to the marking on the RSK. 13. Connect the E8a debugger to a spare USB port. The ‘Found New Hardware’ Wizard will appear. Please follow the steps below to install the drivers. Note

ページ3に含まれる内容の要旨

4. Programming and Debug 27. Ensure the “SessionH8_SLP_E8a_SYSTEM_300L” session in the right hand drop down list on the toolbar is selected. 28. Click the button on the debug toolbar. 29. Select the correct device type (e.g. H8/38347F for RSKH838347). 30. Select “Erase Flash and Connect”. 31. Select “Power target from Emulator” and select “5V” if the E8 is to provide the power to the RSK board. Otherwise connect a 5V center positive supply. 32. Click . 33. The

ページ4に含まれる内容の要旨

5. Next Step After you have completed this quick start procedure, please review the tutorial code and sample code that came with the kit. You can add projects to the current workspace by selecting (Project > Insert Project) from the main menu. The tutorials will help you understand the device and development process using Renesas Development Tools. The Hardware manual supplied with this RSK is current at the time of publication. Please check for any updates to the device manual from the Ren